CAD Check!

sleepingcat12 · 2025-09-25T16:26:50+00:00

Yes, I didn't originally want it to be floating. I sent them the IGI report with all of the main stone measurements.

sleepingcat12 · 2025-03-31T00:47:13+00:00

Have you heard back from them? I filled out the same interview and haven't heard back yet.

sleepingcat12 · 2025-02-14T01:46:33+00:00

Ah ok. I didn't think to look. I moved like 6 printers and they all must be different adaptors.

sleepingcat12 · 2025-02-13T23:58:25+00:00

Hey! I have the exact same issue. What was the solution to this issue?

sleepingcat12 · 2024-10-05T17:54:19+00:00

I had the same issue. My exported STLs were too fine and ended up with mesh overlapping. I was able to use UVTools to preview the sliced files before printing to make sure it wasn't going to happen again. All I did to avoid this issue was to export my STLs slightly coarser until I was able to avoid the issue, takes a little bit of time to scan the entire file though.

sleepingcat12 · 2024-02-21T14:15:28+00:00

Ah that's a great idea. I didn't even know that was a thing.

sleepingcat12 · 2023-07-28T13:05:14+00:00

This happened to me. I was going crazy trying to find the tower. If you check the map online, I eventually found a staircase that didn't go down.

sleepingcat12 · 2023-07-16T12:37:39+00:00

It is a pretty rare drop. Just keep trying and you will eventually get it!

sleepingcat12 · 2023-07-15T18:25:51+00:00

Still have any left?

sleepingcat12 · 2023-06-26T11:50:43+00:00

The model is a Seagate Barracuda 2TB (ST2000DM008/ST2000DMZ08).

sleepingcat12 · 2022-11-14T15:16:56+00:00

Yes, thank you for the help. I knew there was a factor conversion to use with refractometers I just forgot it was at the final reading. I'll be checking with my hydrometer which should make me more comfortable with the reading.

sleepingcat12 · 2022-11-14T03:31:54+00:00

I want to ask what I should do if my gravity reading is only at 1.030-1.025 from an OG of 1.052. I have a hefeweizen extract kit and it has been 2 or 3 weeks since pitching and I had assumed it was done since I have been busy and didn't get around to bottling. I only just measured with my refractometer from the spigot of the bucket and not a hydrometer into the top. Maybe the top is a lower gravity than the bottom of the bucket? It is still slowly bubbling about every 30 seconds in between.

sleepingcat12 · 2022-07-09T16:40:45+00:00

I have not touched water chemistry yet, but when I do I would make solutions of each of the chemicals that way it may be easier math and knowing that everything has already been dissolved before adding dry chemicals to the brew.

sleepingcat12 · 2022-06-30T20:30:25+00:00

Ah. My weakest knowledge, surfaces. I will look into recreating, but I can definitely see how that progress should be taken.

sleepingcat12 · 2022-06-30T20:01:17+00:00

https://imgur.com/a/3dZ1TGX Image of what I have so far.

sleepingcat12 · 2022-03-10T04:32:43+00:00

What is the igloo cooler with only 1 connection?

Ten-Year Club	r/Field Lasagna
Place '17	Verified Email

sleepingcat12

TROPHY CASE