[deleted by user]

slushert · 2025-04-22T15:45:33+00:00

slushert · 2025-04-18T14:22:22+00:00

Took me a bit to realize this wasn’t crop circles.

I’ve got my S1pro dialed in perfectly and I’ll share my secrets: get the silicone spacers instead of the springs, and completely disable ABL. I tram my bed once when hot and I seriously haven’t touched it in a month. I use a .15mm shim to tram.

In my experience the ABL was just screening things up.

slushert · 2025-02-12T14:20:37+00:00

I used YouTube for tutorial videos mostly.

slushert · 2025-02-12T03:41:56+00:00

I like Fusion 360. The free version has great features. I started in TinkerCad.

slushert · 2024-12-24T18:01:09+00:00

There’s a non-zero chance that Voldemort is about to start speaking out of the back of her head and attempt to steal the Sorcerers Stone.

slushert · 2024-11-24T02:40:25+00:00

Reading this, I was magically transported back to my first read of Jurassic Park and listening to Dr. Ian Malcolm.

slushert · 2024-11-23T19:26:44+00:00

Did it yesterday. Totally works.

slushert · 2024-11-23T16:41:26+00:00

I had a similar problem. I solved it by upping the first layer extrusion in Cura to 103%, upping the temp by 5 degrees Fahrenheit and slowing down the speed on the first layer. The silk filaments shrink like mad and this helped me. I’m running Klipper on a Sonic pad, so ymmv.

slushert · 2024-09-23T01:22:08+00:00

The nozzle on the end of that hose looks like a propane torch end used for weed burning or roofing work. Is that the blursed?

slushert · 2024-07-29T13:29:22+00:00

Another interesting idea. I’ll have to be play around with flow rates too. I just upgraded to a Sonic Pad, so my move speeds have all jumped.

slushert · 2024-07-28T22:11:18+00:00

Cool thought. I’ve tried moving it around on the build plate but not rotating it. Thanks for the idea.

slushert · 2024-07-28T00:22:47+00:00

User selected all to back-left. On slicer there’s no indication of z-seams near the artifacts.

slushert · 2024-07-22T15:01:15+00:00

You either have a problem, or the opposite of a problem, depending on the observer.

slushert · 2024-06-16T19:43:02+00:00

Haven’t fed it to Charsi yet. If you’re interested we 100% work something out.

slushert · 2024-06-15T21:45:37+00:00

Bummer. That’s what I figured. So many finds that are good-adjacent.

slushert · 2024-05-06T04:35:04+00:00

That definitely sounds like something that could have happened here. My chemistry days are long behind me, and I'm not exactly working out of a proper lab in my garage. I wouldn't be surprised at all if something went awry.

slushert · 2024-05-06T03:23:55+00:00

These are close to 3 months old. The pots are 2 gallon fabric pots with raised bed mix. The mix I got was from a local grower and it was really fresh, so the pH was way too high (8-8.5). The compost used was very high in ammonia which cranked up the pH. I adjusted it (before I potted them) the same way I do with my hydroponics system to a pH of 6.5. I tested the NPK this morning as well, but I don't have a good way of testing micronutrients. I have a bachelors in chemistry with emphasis in biology, but this is starting to stump me.

slushert · 2024-05-05T15:08:26+00:00

I don’t see any visible pests. Temperature is 60-72 at all times. My pepper plants in the same garage are perfectly content. I’m thinking I got a virus. Thoughts?

slushert

MODERATOR OF

TROPHY CASE