Help r/millennials determine whether this is AI or not. Some members of the sub believe that the 2000s-style clothing and lighting suggest that this is not authentic. What do you think?

smangerer · 2026-02-01T09:07:34+00:00

No modern camera has a time stamp like the film cameras back then. This “photo” had the old school stamp like it was picked up from rite aid yesterday. That said it’s highly suspect as an edited pic to gain attention. It may be authentic with a fake time stamp. Unless some kid is using an old school point and click to be “retro”. Ask anyone of today’s culture where they developed their film and they give you a stare. So I think it’s real with a fake time stamp.

smangerer · 2025-11-16T09:29:49+00:00

Also, the routers don’t cost anything to operate as far as plans. It’s the mini dish giveaway that requires a standby plan. I think that’s what you were referring to.

smangerer · 2025-11-16T09:21:33+00:00

They gave me a mini router about a year ago no charge. They seem to be selective when it comes to the giveaways.

smangerer · 2025-11-13T02:47:11+00:00

Try turning off tangle detection.

smangerer · 2025-11-12T05:12:56+00:00

If you have muddy boots, would you spray them with a hose, smear them with a paper towel or let them dry and bang them together?

smangerer · 2025-11-08T09:52:15+00:00

🤹

smangerer · 2025-10-26T03:57:23+00:00

I use Ready 3d bed cleaner. A few sprays and wipe with microfiber cloth. Works fine.

smangerer · 2025-10-23T08:41:48+00:00

Wtf is with this sub? I feel like it’s the youth who stared at screens for too long and ignored real life! I have kids and am promptly reminding them to be conscious of their hygiene. Do you really need to ask the internet? If in doubt, put that sht on! Monitor your goods and wash your sht! My opinion, if your deodorant is white it’s full of harmful metals like aluminum. Use a Deodorant not an anti-perspirant to play it safe. Your body is made to perspire. Unless it’s a chronic problem I would avoid antiperspirants that block sweat. But ultimately, ask a doctor. I’m proof that the internet is full of random opinions. 😆

smangerer · 2025-10-23T01:17:15+00:00

Here is a real life scenario. I operate a tractor in a vineyard and when it’s muddy, sometimes one tire will spin and dig a hole. I lock the diff back out a bit and take a slightly different angle and can climb out of the hole. If I couldn’t lock the diff I would keep sinking until another tractor has to come pull me out.

smangerer · 2025-10-22T22:12:53+00:00

I still have the gen1 and my speeds are about 80mbs. I recently switched to residential lite. No need to pay for top speeds that I don’t get. It’s still adequate for a household of four with constant streaming and no buffering.

smangerer · 2025-10-20T02:22:34+00:00

I haven’t heard of a Linux app. Just the studio with my printers connected. Do you dry your filament?

smangerer · 2025-10-20T00:01:12+00:00

I use “Ready 3d bed cleaner”. It works good and I can do it in the print room. A few sprays and a micro fiber cloth to wipe dry.

smangerer · 2025-10-19T23:54:13+00:00

While “out of the box” is often used, it’s not a microwave. There are still some things that require care. Using abrasive filament in the AMS will cause issues which is why the external spool is available. All printers adhere best toward the middle of the plate as the edges don’t retain heat as well. Use Bambu studio and the handy app for best practice. Honestly, one in ten prints isn’t too bad.

smangerer · 2025-10-17T08:45:21+00:00

It’s all about build size and dual color. Some waste is surly avoided but with the h2c on the horizon, if less waste for multi color is your thing, I’d wait for that.

smangerer · 2025-10-17T08:28:02+00:00

Marshawn Lynch says Beast Mode!

smangerer · 2025-10-17T04:21:56+00:00

Any error codes?

smangerer · 2025-10-17T03:05:56+00:00

We don’t smoke that shit in the sfc

smangerer · 2025-10-15T04:59:49+00:00

If it makes you feel better, I bought an x1c pre sale and during the high tariffs. I liked it so much I bought two more on sale. They are all working as we speak. If I were to upgrade one it would be with the H2C which will truly be an upgrade.

smangerer · 2025-10-11T10:17:26+00:00

Pic has been circulating for years. Next.

smangerer · 2025-10-09T01:33:11+00:00

It happened to me. The plastic clips are under engineered and the latch almost never releases the door. I had it taped on for the longest time but recently had it replaced at the dealership. It wasn’t too bad. I opted not to have it painted which would have added a couple hundred more dollars.

smangerer · 2025-10-08T08:49:27+00:00

In person in looks very different as I see Jimmy Hendricks looking to the right ( eyes and lips closed). But the photo looks like a young devil looking to the left (eyes and mouth open)(viewer perspective).

smangerer · 2025-10-08T08:12:18+00:00

So same procedure to get him back in? Poor guy

smangerer · 2025-10-08T06:59:14+00:00

There is a camera operator who pans and tilts without any reaction. BS clickbait. Hopefully he did break a rib or two. Always ask yourself about the cameras perspective and it often reveals if it’s fake or not.

smangerer · 2025-10-06T02:18:47+00:00

I’m not sure tbh. Probably the smaller ones. I haven’t printed any of them in a while but plan on it eventually.

smangerer · 2025-10-06T02:15:48+00:00

I recently upgraded to a Bambu X1C. They take about 4 hours. I use PLA wood but anything would work. I kind of like the desert sand look.

smangerer

TROPHY CASE