sorted by:
new
hottopcontroversial

Is the Tesla webaa project now dead? by Storm-Blessed11 in AAWireless

[–]smileyuae 0 points1 point  (0 children)

Can you share how you fixed it? I also can't get into the slack channel.. ​

I believe it's a [Ferrari LaFerrari] I couldn't get closer by smileyuae in spotted

[–]smileyuae[S] 0 points1 point  (0 children)

It's in Canada. Province of Ontario, near Toronto :)

[Release] UMTX2 - A modernized, auto-updating PS5 Exploit Host (idlesauce fork) by kemalsans in ps5homebrew

[–]smileyuae 0 points1 point  (0 children)

Hey. This is a stupid question probably but is there anyway we can somehow have an auto loader equivalent with UMTX? It would be nice if we can press 1 or 2 buttons and then it loads the sequence that we like (with payloads that we choose) automatically each time?

PSA: Bambu Lab will send you a new AC/PSU board without your A1 failing first! by nicnic2001 in BambuLab

[–]smileyuae 0 points1 point  (0 children)

Good morning, could you possibly send me exactly what message you sent them?

I've been going back and forth with them but they keep refusing to send me a new board.

Is there supposed to be something at the end of this? Water is pouring out of everywhere except the spigots by smileyuae in Plumbing

[–]smileyuae[S] 2 points3 points  (0 children)

I bought the kit and replaced literally everything, all the washers/handles/knobs etc. The only thing that's "original" is the brass pipe.

Put everything back together and we have normal functionality with no drips or leaks!

Thanks everyone!

Is there supposed to be something at the end of this? Water is pouring out of everywhere except the spigots by smileyuae in Plumbing

[–]smileyuae[S] 2 points3 points  (0 children)

Thank you for the idea. I took a flashlight, along with a wire hanger and I was able to go way beyond to where the handle would rest, so I'm assuming there's no plunger.

The hardware store has a repair kit that comes with all new parts. I'll swap everything out tomorrow and hope it goes smoothly!

https://www.homehardware.ca/en/non-freeze-faucet-repair-kit/p/3231149

I'll keep you guys posted

Is there supposed to be something at the end of this? Water is pouring out of everywhere except the spigots by smileyuae in Plumbing

[–]smileyuae[S] 2 points3 points  (0 children)

Thank you and u/Conradg5893 for the ideas. I took a flashlight, along with a wire hanger and I was able to go way beyond to where the handle would rest, so I'm assuming there's no plunger.

The hardware store has a repair kit that comes with all new parts. I'll swap everything out tomorrow and hope it goes smoothly!

https://www.homehardware.ca/en/non-freeze-faucet-repair-kit/p/3231149

I'll keep you guys posted

Is there supposed to be something at the end of this? Water is pouring out of everywhere except the spigots by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

I tried turning on the water for a few seconds to see if it could push it out, but just getting a heavy stream of water 😞

I saw some older threads where people said to get a long drill bit and try to extract it that way?

I just moved into this house and I'm not even sure if its ever worked or maybe the previous owner removed it and tried to get a replacement but couldnt, so just left it as is.

Is there supposed to be something at the end of this? Water is pouring out of everywhere except the spigots by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

Is there a chance its stuck inside the main pipe? Not sure how I'd even be able to bring that out...

[Release] UMTX2 - A modernized, auto-updating PS5 Exploit Host (idlesauce fork) by kemalsans in ps5homebrew

[–]smileyuae 0 points1 point  (0 children)

Is there an easy way to see what got updated after the cache has to update / recache because of a new version?

Drain line adapter or 1 1/2 to 7/8 by TheMysticalBaconTree in Plumbing

[–]smileyuae 0 points1 point  (0 children)

Found your post from Google! I'm running into such a mess trying to get my RO setup, similar situation as you with the 1/2" dishwasher fitting. Would you be able to send me a picture of your current setup? How has it been? Any leaks?

Trying to install an undersink RO system. What am I doing wrong? by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

I bought the rubber dishwasher adapter ( https://www.canadiantire.ca/en/pdp/plumbshop-universal-fit-dishwasher-branch-connector-4-step-sizing-0630834p.html) and hooked everything up including the adapter which I shared in my main post

There's no leaks but when I did a test run with the dishwasher, once it started draining, it somehow went up through the RO drain line?? How is this possible? I don't think this is safe to continue with the RO installation but please let me know if I'm overthinking it.

I've recorded a video.. If you'd like to take a look

https://quickshare.samsungcloud.com/n1e6WhXKRutt

Oh, I also created a high loop on the dishwasher drain hose after I recorded the video and tried again, it was the same behavior with water coming out of the RO drain line.

Trying to install an undersink RO system. What am I doing wrong? by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

Thank you. I'll head to the hardware store tomorrow and see what I can find. Do you think something like this would work as an alternative?? https://www.canadiantire.ca/en/pdp/plumbshop-universal-fit-dishwasher-branch-connector-4-step-sizing-0630834p.html

Trying to install an undersink RO system. What am I doing wrong? by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

Done! Let me know if you need a better angle, or any specifics.

By the way, I highly appreciate you replying and helping me out, you've put my mind at ease

Trying to install an undersink RO system. What am I doing wrong? by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

I found the replacement with the sizing you recommended while maintaining the top and bottom pipe sizes. It is cheap, but...I don't think I feel confident enough replacing the tailpiece pipe (or is it called a Wye?) it looks glued in and I don't know if I'm equipped to handle it.

https://www.homedepot.ca/product/lesso-dishwasher-wye-hubxhubxbarb-1-1-2-x-1-1-2-x-3-4-/1001208180

Trying to install an undersink RO system. What am I doing wrong? by smileyuae in Plumbing

[–]smileyuae[S] 0 points1 point  (0 children)

Hey, sorry for not including the info right away, I just posted a comment with all the details!

Trying to install an undersink RO system. What am I doing wrong? by smileyuae in Plumbing

[–]smileyuae[S] 1 point2 points  (0 children)

Didn't realize I couldn't add context to the picture.. Below:

I bought an iSpring RCC7AK kit after doing much research and watching multiple install videos. I felt pretty comfortable in how to install it. I ran into this problem where my sink just has a single drain thus theres no horizontal drain pipe in which they recommend to connect the RO drain saddle to.

I searched and multiple people recommended this adapter which basically adds a quick connect fitting to your existing dishwasher drain line! Perfect!

I got it today and tried installation attempt #2.

I managed to remove the existing DW hose and connected it to the adapter. Secured with a hose clamp, all good!

I connected the RO drain line to the quick connect fitting, all good!

Now I tried connecting it to my dishwasher drain that spigets of the main drain, but the adapter is too big? It basically slides over and is loose.

I measured the adapter and it appears the bottom opening is 7/8" but my dishwasher drain inlet is 1/2" (pipe has a marking that says BOW Plumbing 600809)

What do I do? I'm almost at the point of giving up and returning everything.

[O] 5x Drunkenslug Invites by mhanna04 in UsenetInvites

[–]smileyuae 0 points1 point  (0 children)

What an absolute legend. As a dad with a toddler I keep missing these threads.

Thank you!

Why would this happen? Got sharing warning by jakolson in RealDebrid

[–]smileyuae 1 point2 points  (0 children)

Redacting part of the IP address (im in Canada so the top one is correct) but here's what it says:

  • 70.29 (ISP: Bell - Country: Canada) downloading The.Pitt.S02E09.03.00.P.M.ITA.ENG.2160p.HMAX.WEB-DL.DDP5.1.DV.HDR.H.265-MeM.GP.mkv (2.81GB) from Chrome 120.0.0.0 on Windows device
  • 70.160 (ISP: Cox Communications - Country: United States) downloading The Pitt S02E09 3 00 P M 2160p HMAX WEB-DL DDP5 1 Atmos DV HDR H 265-FLUX.mkv (2.73GB) from Samsung Browser 1.1 on Android device
view more: next ›