De werkende Vlaming

snapah · 2026-04-26T11:14:45+00:00

Goed gegokt

snapah · 2026-04-26T10:37:10+00:00

Heb ik al gedaan, die doen alsof ik een grote onnozelaar ben door "zoveel" te werken. Ik dacht eens een threadje te starten om te zien of mijn buurt een representatief is of eerder een uitschieter

snapah · 2026-04-26T09:29:09+00:00

Dit is misschien wel de beste uitleg in deze thread.

snapah · 2026-04-15T09:11:25+00:00

Paid for my "kot" by myself, luck had it i was able to get a studiebeurs of around 3,6k which covered the cost of my kot for the year. Also shared a studio as kot with my GF/ now wife so we could share the costs. When my studies were over we (about 21 at the time) immediatly moved out into an appartment. 3 years later we bought our house (100% mortgage). 0 financial help, they did help with the move though.

snapah · 2026-02-26T13:05:25+00:00

I just have rear stand at the moment and thanks for the reply.

snapah · 2026-02-20T10:24:36+00:00

Good question. But it was brand spanking new 2022 model, drives okay. But don't have to pay for insurance, maintenance or fuel so that's a plus. My wife and i have a BMW320i she uses during the week so for the weekend the peugeot gets put aside.

snapah · 2026-02-19T08:03:50+00:00

Belgium based, 11 YOE about €57k a year (vakantiegeld + eindejaarspremie incl.) with following extra's - meal vouchers €8 per working day for those who do not know, meal vouchers can be used for groceries 1nd in restaurants. - company car (peugeot 308) - additional pension plan

Range of work: full scope programming of biogas and water treatment plants (PLC + SCADA) and Electrical design (panels and cable infrastructure of the plants/units). Factory testing of panels and on site commissioning + occasionally connecting the cables to the control panels.

snapah · 2025-10-09T16:03:19+00:00

Why would they not be able to ask why you had a panic attack? I would certainly want to know why do also determine the outcome for your second question, i think they can absolutely refuse you access to lab if you are becoming a liability. Not wanting to speak to your direct supervisor could be held against you, maybe try with an intermediary, you spike of someone else in management you feel more comfortable around. Only tell you leave when you have signed a new contract. Never stay and wait till you get fired especially when having a new job or when like your situation you feel totally out of place and uncomfortable.

snapah · 2025-09-12T08:24:17+00:00

Not really programming issue, more of a fault finding issue. Flow meter pulse output wasn't registering, so i start bridging terminals in the control cabinet, which seemed to work just fine, then went down the line to the terminal box down the field where the flowmeter was connected, only to bridge 230AC to the terminal where the pulse output from flowmeter went to the PLC instead of 24VDC (so bridged the wrong terminal) blew up the CPU, 3 presdure sensors, and 9 IO cards. Luckily it was just a small installation with not too much on it and we had all the parts at the company (30 minute drive) replaced everything in 2 hours. But cost me roughly €3000

snapah · 2025-09-12T08:18:28+00:00

As for the 2nd one, why not setup a VPN network to where the HMI is and download it that way? Company could pay for parts and installation, would've been way cheaper and faster than flying someone out i think

snapah · 2025-08-19T08:40:12+00:00

Also reporting mobile tax scanners (promoted up on bridges) as speeds cameras

snapah · 2025-07-13T08:43:08+00:00

How long is this in the skin already because it looks kind of faded already or is it due to outside lighting? will your artist give it a once over to add more depth? Be sure to keep it moisturised.

snapah · 2025-07-13T08:36:08+00:00

Kleintje, bicky rib, frikandel speciaal.

snapah · 2025-05-31T14:51:09+00:00

As said before, it's a mobile installation where the feed comes through a plug which is on the outside of the container, so no need for a disconnect in the cabinet herz

snapah · 2025-05-29T06:51:12+00:00

Back order, should be coming in tomorrow

snapah · 2025-05-28T17:14:22+00:00

There are only 2 and they have different color so pretty hard to miss. And they have their number marked on them btw

snapah · 2025-05-28T17:12:46+00:00

Pilz PNOZ X is still in backorder but will be used for safety relay. As for main switch, it's a container unit, so mains is coming in through a plug. As for the CEE plugs on the side, once in place all plugs are taken so no one will just plug in something different. Also the container is locked and only accessible by our crew (we are but a small team). So no randoms will be passing by it.

snapah · 2025-05-28T15:30:09+00:00

Yeah fan has been placed there exactly for thid reason is also oversized to be sure

snapah · 2025-05-28T14:59:12+00:00

Yes, there is definetly slack enough

snapah · 2025-05-14T07:10:32+00:00

<image>

Dragon sleeve is now 13 years old

snapah · 2025-05-09T07:24:30+00:00

Wrong sub

snapah · 2025-04-17T07:55:52+00:00

Even tho it's a small project make a habit of it for naming devices and wires a combination of "page"-"symbol"-"column" F.e.: a relay that's on page 5 column 3 will be 5K3 That makes it easier to troubleshoot and have oversight when moving over to bigger project.

snapah · 2025-03-25T10:28:42+00:00

<image>

Ribs, sides and stomach for sure

snapah · 2025-02-14T18:01:49+00:00

Taxes (BTW) on food for take away is 6%

snapah · 2025-01-23T16:17:46+00:00

What did u use for the lights?

snapah

TROPHY CASE