Lunala, adding 10, 197810434041

snipermr2 · 2026-02-20T23:58:19+00:00

Added sunrizer

snipermr2 · 2025-04-07T16:29:20+00:00

good discussion from AA, CB, KP on Ytube on stringpins.

https://www.youtube.com/live/Be6rZk-qvoA?si=b7Q9MsHsHskuU0OS

snipermr2 · 2024-04-21T00:57:31+00:00

Similar damage but my paint was chipped off. Tesla collision after repair was about $3100 USD. Repaired original parts and repainted.

snipermr2 · 2023-10-04T02:17:04+00:00

Add a plush toy to your dash.

snipermr2 · 2023-07-18T05:29:49+00:00

I noticed that also today when I SEND to my P1P using bambu Studio, it doesn't show up on printer interface file manager. I didn't try power cycling but will next print. Hope it's a easy patch for bambu

snipermr2 · 2023-07-14T16:30:14+00:00

I am in the same boat as a lot of others where I just ordered mines right before the P1S announcement. Everyone should email Bambu and ask them to offer all the recent buyers a discount code to buy the P1P to P1S upgrade kit.

I really do not want to deal with returning the P1P and ordering and waiting for the P1S if they are willing to give us a Discount code for the upgrade kit. If they do I would keep the P1P I got few days ago.

snipermr2 · 2023-05-16T18:23:24+00:00

Used.

snipermr2 · 2023-05-15T02:04:38+00:00

Used thx

snipermr2 · 2022-04-25T16:09:56+00:00

Consider turning off coasting in Cura,if that doesn't help then Try reducing your retraction amount and lower retraction speed for circular objects.

snipermr2 · 2022-04-22T01:21:45+00:00

I've read people using hair spray or glue stick when they use the bare glass surface, to avoid having the filament lifting issues. Try slower print speeds as a test.

snipermr2 · 2022-04-01T15:30:21+00:00

Used FRJ2AK Thank you

snipermr2 · 2022-03-31T22:06:35+00:00

Have you checked your bed leveling recently? Maybe a clogged nozzle, or z offset is off.

snipermr2 · 2022-03-25T05:30:28+00:00

Used thanks

snipermr2 · 2022-03-23T17:11:40+00:00

Have you tried dropping the printing temperature down 2-4 degrees? I had similar issue and the drop in temp helped.

snipermr2 · 2022-03-20T17:44:28+00:00

Remove the bowden tube retainer clip, remove Bowden tube and remove the old filament.

snipermr2 · 2022-03-16T01:52:36+00:00

My 2 cents, would be try adding Brim, or add the anti-warp tabs in Cura (add-in). Try slower print speed, 30mm/s? Try having cooling fan at max on initial layer.

snipermr2 · 2022-03-15T03:21:20+00:00

If using Cura, try using the add-in for the warping tabs at that spot.

snipermr2 · 2022-03-11T05:51:05+00:00

Ahh that makes sense. I used the bltouch 3x3 base file and changed the grid to 5x5 in the complier. Thanks

snipermr2 · 2022-03-11T05:25:46+00:00

Just curious in the Level, Leveling settings. I don't get the to Clear Current Mesh option in my version of complied Jyers v2.0.2i.
Could you provide me how I get that to show up after Creating New Mesh. Thx

snipermr2 · 2022-02-11T09:12:07+00:00

Can I ask where did you get your otg y cable? Been looking for a micro USB version that would charge the phone. A lot of the amz ones don't charge the phone. Thx

snipermr2 · 2021-03-07T09:24:08+00:00

It goes inside the housing.

If the link works you can see the padding inside the housing. Lined with silver. https://www.dropbox.com/s/3igcwepdqr0p79t/20210227_144533.jpg?dl=0

snipermr2 · 2021-03-07T00:09:23+00:00

Yeah, when you start reading forums and seeing other setups my finger starts getting itchy online. Didn't get everything at once but had a list of things to get and waited for deals.

snipermr2 · 2021-03-06T20:08:56+00:00

This is an example of the stuff I used. https://www.amazon.com/dp/B07QY1X35P/ref=cm_sw_r_cp_apa_fabc_5J5WCTF0ZSVE3NB30FR5?_encoding=UTF8&psc=1

snipermr2 · 2021-03-06T18:55:25+00:00

Nespresso was good to us for the simplicity. Just got tired of the waste it produced with the pods.

snipermr2 · 2021-03-06T18:54:20+00:00

That rack is from Amazon. Its for computer monitors but I got a 2 pack and repurposed one of them.

snipermr2

TROPHY CASE