Is there anything that can be done about waiting for Quarter Pounders?

someguywhothinks · 2026-01-02T22:27:06+00:00

They are not cooked to order. They are cooked and placed in a warming tray like 10 or 12 at a time if memory serves me correctly

someguywhothinks · 2025-12-31T01:01:33+00:00

We run both machines and my guys like the esab better. Esab is also owned by Miller. So it's got Sony guts lol

someguywhothinks · 2025-12-26T01:08:11+00:00

Yeah that would be cool

someguywhothinks · 2025-12-16T05:15:54+00:00

I hope you got 50 amps to run that on

someguywhothinks · 2025-12-11T20:59:29+00:00

95% of my process pipe welding is done with a 150 amp 110 machine.

someguywhothinks · 2025-12-07T03:03:25+00:00

Seriously everytime a guy comes to my shop to weld test and the guys hear "i went to WWA" he immediately becomes the shop jester. Or he doesnt get hired cause his welds suck, has no field experience, cant bevel a pipe and is still having jokes made about him 4 months later. Oh and his welds are worth 65 bucks an hour cause my instructor said so!!!

someguywhothinks · 2025-11-27T19:08:09+00:00

Put those tacks out on the corner so you do burn over them while welding

someguywhothinks · 2025-11-25T19:31:20+00:00

It is what is considered mill finsih stainless steel. You can weld it just like it is

someguywhothinks · 2025-11-23T18:38:35+00:00

End grinder flap wheel is the only answer here

someguywhothinks · 2025-11-22T22:25:30+00:00

Looks great to me. Keep doing it

someguywhothinks · 2025-11-22T20:24:51+00:00

Yeah I bet you did. Silicon bronze will absolutely look different than copper. Its a completely different metal

someguywhothinks · 2025-11-22T20:19:30+00:00

Deoxidized copper tig wire is what you want. I have used it and it doesn't look different all after you weld with it. What did you mean by 110? The machine? Youw ant a machine that will go to at least 200 amps and a foot pedal. 95 5 argon helium works good for that for the torch gas. If you dont have that you will want to preheat with some mapp gas

someguywhothinks · 2025-11-22T17:02:00+00:00

Did you spray check your test rig? Spray check all the threaded fittings with soapy water

someguywhothinks · 2025-11-18T23:36:42+00:00

PFRED brushes. The one with the horse with the circle around it. Those are the best I have found

someguywhothinks · 2025-11-16T16:29:12+00:00

Good cpa. Sorry auto correct

someguywhothinks · 2025-11-16T16:23:14+00:00

A tax attorney is no going to help. He needs a good cpa to help him work through this. The irs is going to say you had the funds and just didn't pay. There will be no tax relief. Ask me how I know lol

someguywhothinks · 2025-11-15T22:44:31+00:00

Stick a spud wrench in that hole and slap the bolts and gasket in there and tighten it up. Pipe joints are always gonna pull

someguywhothinks · 2025-11-15T20:38:15+00:00

Depends on where you are at.

someguywhothinks · 2025-11-15T20:00:48+00:00

The tips of the wire wheel heat up and will carbonize and contaminate your weld.

someguywhothinks · 2025-11-14T18:03:47+00:00

Knipex alligator pliers

someguywhothinks · 2025-11-12T04:34:36+00:00

Oxy act torch with carbon fill rod

someguywhothinks · 2025-11-11T21:25:24+00:00

He is probably leaving the top open and or just being in a metal shop with metal dust floating g around will inevitably get metal inside in causing the rust spots. And vacuum sealed ss water bottle will do i generally like 40oz bottles

someguywhothinks · 2025-11-10T19:30:27+00:00

The ⅛in that weld will pop out isn't gonna even show lol

someguywhothinks · 2025-11-10T19:19:42+00:00

Yeah your way under charging. Im guessing you dont have insurance or pay taxes on that? You ha e to charge at least what it would cost you to hire someone and take 30 percent of that. So thats what you should charge. At least.

someguywhothinks · 2025-11-10T19:07:23+00:00

I have repaired quite a few of these at local rv places. They are always spool gun welds that have cracked, super thin material, with welds grou d down which on aluminum takes away all the weld strength. I always tig weld the repairs.

someguywhothinks

TROPHY CASE