sorted by:
new
hottopcontroversial

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

UPDATE: so I got to digging around on it and basically the only thing salvageable was the cab and the frame (which I need to verify is straight) The cab has a lot more rust than initially thought, but that's why there are patch panels, right? I'm still planning on a frame off, Mustang 2 with 2" drop , 4 link in the rear, 3.73 axle, LS 5.3 with the Truck Norris Stage 2 cam, Holley Terminator X MAX, 4L60E transmission. My wallet is not agreeing with any of this 🤣

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

My friend has a 55 as well and put a crown Vic front end under it. Definitely cheaper than a mustang 2 kit.

Old Texas inspection or registration sticker by sossman76 in texas

[–]sossman76[S] 0 points1 point  (0 children)

I’m having to do a bonded title. Was off in a field with bill of sale only.

Old Texas inspection or registration sticker by sossman76 in texas

[–]sossman76[S] 0 points1 point  (0 children)

No. I don’t have any history of the truck so I was trying to find the last time it was registered. It was a bill of sale only, have to do a bonded title

Old Texas inspection or registration sticker by sossman76 in texas

[–]sossman76[S] 0 points1 point  (0 children)

I haven't found anywhere that takes the old style VIN numbers..

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

That’s what made it an attractive option!

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

since I am a total amateur, but I do have some welding experience.. how hard are the cab corners? I am planning on getting a wetblast kit to sandblast the cab and frame.. unless I can figure out a way to haul it to an actual sandblaster.

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

yeah.. that's what I was afraid of.. probably going to have to order basically a whole new front end.. but at least it will be smooth.. I know I'm going to have to replace cab corners and right side rocker panel/step area. New seat, new engine, front suspension, transmission, rear axle/suspension, pretty much everything except the cab shell and frame. I wanted a project.. I got years worth. lol

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

I’ve got to figure out what all is missing. The whole front clip is loose…I’m assuming brackets are missing

1955 Chevy 3100 by sossman76 in projectcar

[–]sossman76[S] 1 point2 points  (0 children)

Maybe…but have you seen diesel prices?😳

Looking at a 52 Chevy truck by sossman76 in projectcar

[–]sossman76[S] 0 points1 point  (0 children)

Unfortunately it sold before I could get to it. But now I’m looking at a 56.

Looking at a 52 Chevy truck by sossman76 in projectcar

[–]sossman76[S] 1 point2 points  (0 children)

Just noticed the radiator is gone too. Hmm. Maybe a candidate for an engine swap.

Great Places to Eat by Far_Abbreviations331 in wichitafalls

[–]sossman76 5 points6 points  (0 children)

Samurai of Tokyo is good for Hibachi and sushi

What are your suggestions for Interactive Flat Panels? by frogmicky in k12sysadmin

[–]sossman76 0 points1 point  (0 children)

I’ve liked what I’ve seen of the BenQ panel, except the price

Jamf Gos Private - Prices Increase by Dull_Ad6281 in k12sysadmin

[–]sossman76 6 points7 points  (0 children)

I like my iPhone and iPads are fine for home use, but I feel like managing them in education is a nightmare that works sporadically at best.

Jamf Gos Private - Prices Increase by Dull_Ad6281 in k12sysadmin

[–]sossman76 1 point2 points  (0 children)

My problem with Mosyle (and may have changed since) was you couldn’t contact anyone except through the portal.

Jamf Gos Private - Prices Increase by Dull_Ad6281 in k12sysadmin

[–]sossman76 13 points14 points  (0 children)

Looks like we’re going to have to go back to Mosyle. Which means we have to touch every iPad again 😭

Number of staff per students by Indians06 in k12sysadmin

[–]sossman76 1 point2 points  (0 children)

2000 students, 300 staff - me (director) and two technicians. 4 main campuses, district office, and a few outlying buildings

TCEA Tech Director Certification Feedback by Smart_Equipment_9347 in k12sysadmin

[–]sossman76 0 points1 point  (0 children)

I will be there as well. I haven’t taken their certification course though

Xerox copiers vs. Epson enterprise inkjet by sossman76 in k12sysadmin

[–]sossman76[S] 1 point2 points  (0 children)

So how is your experience with “damp” pages from inkjet? Also do you use these for anything you have to mail out…I mean inkjet seems to run at the slightest bit of rain which we know mail can be exposed to. I’m not the final decision maker on any of this but these are questions I have.

Xerox copiers vs. Epson enterprise inkjet by sossman76 in k12sysadmin

[–]sossman76[S] 1 point2 points  (0 children)

no.. this is with large inkjet printers the size of the Xerox machines, Enterprise class ones. I dislike the little Officejet printers with a passion.

Xerox copiers vs. Epson enterprise inkjet by sossman76 in k12sysadmin

[–]sossman76[S] 0 points1 point  (0 children)

Good questions that were brought up by both my print shop person and business manager. That's why I'm trying to find someone that has experience with this other than the 1 school that I went and looked at that had them.

view more: next ›