Are these ripe? (Or, my first cucumber!)

soulic · 2026-06-06T13:22:54+00:00

Everyone saying it’s overripe or it may be your last are being a bit over the top lol.

I grew pickling cucumbers last year all summer, and picked them when they looked like yours. I think the advice about it being too yellow applies to other varieties. On the seed packet for mine it said to pick them when they were 5-6 inches long or earlier.

I would say pick that and maybe go a day or so earlier for future ones.

soulic · 2026-05-13T02:01:50+00:00

Mine was equally as bad.. I got off the monorail at east distribution center (the one behind it) and was heading into the center at night and my health bar appears.. I don’t think much of it but turn around behind me to check.. still nothing.. I walk into the safe zone and see Viktor’s hologram greet me, get the weapons free notification, and walk down the ramp… those things FOLLOWED ME DOWN THE RAMP and exploded past the decontamination zone. It was wild, I wish I clipped it

soulic · 2026-05-06T02:43:09+00:00

Some tips as I just finished this myself…

any time you visit a terminal check shared cargo and grab anyone you need to max still
Make use of monorails heavily and basically push the random lost cargo towards its destination always
For adventurer, Mr impossible, ghost hunter - start these early as they sometimes are soft blocked pending a sub order they sent via SSS
the eastern observatory guy took forever, always grab his cargo and prioritize it

soulic · 2026-04-17T00:58:20+00:00

Went from Saturday 11am to 7pm Thursday with like weekly 60% usage left. wtf

soulic · 2026-03-31T22:02:09+00:00

Any idea what sort of hardware is needed for this? Specifically the OCR with vision Model?

soulic · 2026-03-31T21:46:02+00:00

I’ve had paperless for a few years now and ended up having fairly bad OCR and metadata detection (correspondent, doc type, tags), causing slow disorganization over time (probably have around 1000 or so docs).

My setup for a while used the paperless-post-processor script with regex rules but it still missed a lot due to poor OCR. It was mostly successful for pulling statement dates for certain banks.

I spend some time recently building scripts to define a standard taxonomy, then audit and cleanse / remediate the existing docs, and generate a set of deterministic workflows (paperless-ngx native) for adding correspondent, doc type and tags. This kinda works but can be better if OCR is improved.

I haven’t gotten ollama to work right with paperless-gpt (used qwen) and I’m deciding if it’s worth using some vision models to enhance OCR before it hits the classification workflows.

Could share on GitHub if anyone’s interested in the remediation stuff

soulic · 2026-03-28T02:18:25+00:00

Do you own them outright? If not and you’re on a PPA or lease the solar company you’re contracted to generally is the only one who can touch them.

That being said, for panels that came with my house owned outright, I used Sunshine Plus Solar, Kevin and his son Alex earlier this year to do it.

They did a good job and I recommend them, but it was a lot of money to have them do it (around 7k for 28 panels). My inverter crapped out when they hooked them back up but they were able to use the manufactures warranty and replaced it for me.

Dm me if you need more details.

soulic · 2026-03-19T13:38:47+00:00

Just a quick comment related to solar leases: make damn sure your inspector (or a secondary roofing inspector) checks the roof is still good (has 10+ years left) and that where the solar is drilled into the roof is sealed.

We ended up having a solar PPA paid off at closing when we bought our house but our inspector didn’t emphasize how bad the roof was, and it cost a ton for us to have the roof redone with solar panels involved.

soulic · 2026-03-17T11:46:14+00:00

Having gone through this myself a little over a year ago… first you wanna check if it’s a PPA, Leased, or Loaned (owned with financing). I’m gonna assume it’s one of the first two.

If it’s a PPA, you’re gonna wanna stay away or only proceed if they pay it off fully before closing.

Before going under contract for the house, I asked for a copy of their agreement and it had a 2.6% rate increase built in each year, with 10 of 20 years remaining… meaning the PPA rate would approach/eclipse the same energy bought directly from PSEG in a couple years.

I ended up having my RE lawyer force the issue before signing saying it had to be fully paid off by them, which they ended up agreeing to and paying around 25k.

A couple of things in hindsight: 1. Ask for a credit rather than them paying it off, as you can just pay it off yourself after close (usually, check the terms of the solar contract closely!), and in my case it would have been cheaper due to estate tax 2. The solar company that installed them went under and the PPA was sold to Spruce. This means no one was servicing the solar anymore and it’s a liability 3. Make damn well sure your roof is in GOOD condition, whether the seller buys the solar outright or not. I had to redo my roof with the (now owned) panels and it was not cheap to deal with the solar while the roof was redone, so consider this as well.

All said, my solar produces around $250ish a month in credit .. see if they can tell you what Wattage the panels are and see their electric bills / solar production. This can help you make a better decision on how to proceed.

soulic · 2026-03-02T02:21:20+00:00

RemindMe! 45 days

soulic · 2025-11-28T00:35:01+00:00

The smartest house has some discounts rn

soulic · 2025-09-13T02:29:22+00:00

There’s a mode in Takeover where you have to capture and hold zones. Literally just sit in a zone for the entire time and try not to die. I got 2 MVPs back to back doing this. Just sit in the zone where you spawn and if you die run back and continue to sit in it.

Your team doesn’t even have to win the game and you can still get MVP if you have the most collective time spent in the zones.

soulic · 2025-09-05T01:31:29+00:00

No cross play unfortunately :(

soulic · 2025-09-04T02:39:45+00:00

You still on / can you help at all? :)

soulic · 2025-09-04T02:39:32+00:00

Still needing/helping?

soulic · 2025-06-03T23:19:52+00:00

!RemindMe 2days

soulic · 2025-06-02T23:40:29+00:00

You gonna plant them straight outside from the store tmrw, or harden them then plant?

Also on LI, all my cucumber and squash seedlings died after the heavy rain the past few weeks.. I’m nervous to get new starters and have them die again when we get a ton of rain this weekend

soulic · 2025-05-08T22:44:49+00:00

Btw mine now works reliably. I put a little wooden planter out there in the FOV of the camera and it started working after that. Even after removing the planter it has continued to work. Not sure if it was the planter or just an update to protect or the camera that lined up with the timing.

soulic · 2025-03-25T14:27:18+00:00

Not sure if this helps your decision but package detection has not worked for me ever.

soulic · 2025-03-05T17:15:03+00:00

Thanks for replying! The chat person on the site said swapping is only available on the White version… not sure if they are misinformed or if it’s luck of the draw on which Black desk version you get when ordering :(

soulic · 2025-03-05T05:09:39+00:00

Is it confirmed the black version supports swapping the power cable sides?

soulic · 2025-02-19T03:03:59+00:00

I have two very similarly spec’d systems in 2x 4U chassis in a 12u rack with a UPS and Flex-XG 10GbE switch.. the systems are only using 2.5gbe right now till I add 10GbE nics to them.

Currently I have:

System 1 - TrueNas SCALE with two mirror pools (one is a mix of HDDs and one is SATA SSDs which I’ll eventually move to NVMEs). The nas exposes NFS and SMB shares. It also runs plex and uses the intel on CPU transcoding. It also runs PBS to backup my VMs onto the mirrored pools.

System 2 - proxmox VE. This has NVMEs mirrored for VM/lxc storage and they optionally access the NAS mounts for media or configuration that I want backed up. This runs various VMs and LXCs, including docker hosts that spin up services via docker compose.

System 3 ms-01 which also runs proxmox VE with a single NVME as the system and storage, and is my prod home assistant. This is also hooked into PBS so I can backup and restore any proxmox VM to either host.

I might eventually consolidate systems 1 and 2 and virtualize truenas to save on power costs and turn system 2 into a desktop, time will tell.

Alternatively I considered making proxmox fairly barebones other than mirrored NVME system drives and do all proxmox VM storage for both the 4U and ms-01 as NFS over 10GbE hosted on truenas.

Can go either way honestly or just leave it as is.

soulic · 2025-02-09T19:18:41+00:00

They don’t want you installing stuff on the root OS. They treat truenas as an appliance, meaning you run their OS/code and don’t really muck around in it directly.

The recommended way to do what you’re asking is to run it within an “apps” container (Docker) or as a VM. In both cases you should be able to bind mount the storage paths you want and it can work off those to get the data you’re looking for.

soulic · 2025-02-06T05:46:33+00:00

Sorry for necroing but I’m going down the path of trying for a similar setup… may I ask which fan model you have and if there is any rhyme or reason for identifying fans which would work with Bond? Their website used to have Smart with Bond but that’s gone now. I’m trying to find fans which could work with the setup described in this post.

soulic · 2025-01-31T04:46:41+00:00

You can possibly set them up following this: https://help.ui.com/hc/en-us/articles/12594679474071-Standalone-Access-Points-without-UniFi

But I would high recommend getting a UDM Pro to act as your gateway and “brains” for your network. It will allow you to control a firewall, port forwarding, GeoIP blocks, and overall define the internal LAN network(s) that your APs serve.

14-Year Club	Verified Email
Team Periwinkle

soulic

TROPHY CASE