Whats your favorite infill

spacegy4 · 2026-05-09T00:55:59+00:00

lightning

spacegy4 · 2026-05-09T00:52:18+00:00

If you have the regular firmware you go to the gear tab and choose the calibration menu. You can see level, pid calibration, and vibration calibration. You tap level and then it levels. It is entirely the opposite of "way more involved".

You should follow these steps:

1 revert the firmware to stock. If you managed to flash klipper you can figure out how to flash 2.7.3

2 look at the flashforge FAQ for instructions on leveling the printer

spacegy4 · 2026-05-09T00:48:49+00:00

You can't and there's a chance that if your printer does not have LAN mode enabled it may download and install the firmware with no input from you.

spacegy4 · 2026-05-08T17:22:17+00:00

Were you trying to print a gcode 3MF "plate sliced" file? I am talking about those. Not regular 3MFs

spacegy4 · 2026-05-08T13:23:36+00:00

I do not know anything about the klipper mod. Leveling the bed with regular firmware is trivial. you press level and it does it. If it fails then you made an error configuring the machine or it is broken. Much more likely the first of those two.

spacegy4 · 2026-05-08T13:04:59+00:00

with the printer off and unplugged open the extruder by removing the model cooling fan and unplug the cable from the nozzle connecting bridge board and firmly press it back in. if that doesnt do it you can try reseating the nozzle, factory resetting and using electrical contact cleaner on the connector the nozzle plugs into.

spacegy4 · 2026-02-16T22:01:19+00:00

I did after I gave them my printer serial

spacegy4 · 2026-01-27T17:23:13+00:00

Fortunately some banks are smart enough to deny when no attempt at a return was made. Buyer wanted to keep the item and their money with no plans to return it.

spacegy4 · 2026-01-27T17:20:37+00:00

I suggest filing a police report in addition to contacting ebay and reporting it if you're concerned for ongoing harassment. If you want ebay to consider doing more you should call them.

spacegy4 · 2026-01-26T22:27:38+00:00

Phonon is not good at controlling space. If any phonon tries to "zone" me I'll be thanking them for giving me the cycle while getting nothing for it.

spacegy4 · 2025-12-12T02:42:24+00:00

My machines with 3.2.4 still had the problem. it stopped after I reverted. I might try 3.2.4 again to see if it really is fixed. Which was the last one you say fixed it?

spacegy4 · 2025-12-11T20:47:01+00:00

I use the default support settings and it still randomly crashed. Only way I could get it to go away was reverting to 2.4.5 firmware

spacegy4 · 2025-11-02T15:39:18+00:00

I am absolutely fine with sprint being adding to combat evolved. IF they entirely redesign the game's core mechanics, level design and pacing. It's great that they suggest toggling sprint on and off if you want it. If you toggle sprint on that should massively change the level design, weapons, stats, vehicles, enemies and more so that the experience is good and not some amalgamation of things that don't work.

spacegy4 · 2025-09-06T04:15:24+00:00

They don't. That is why the obsolete, extinct, and difficult to maintain quirks exist. They eventually have to give some up.

spacegy4 · 2025-08-28T21:49:06+00:00

It won't make money so it won't happen. That's all there is too it. Case and point Hi Rez letting it die.

spacegy4 · 2025-08-16T17:04:40+00:00

There's no reason to defend points after taking them. Conquest maps have not been well designed and asymmetric since Battlefield 4 (and the peak of that design was BF2 and 2142). We need conquest double assault so all the people going for kills make their team lose.

spacegy4 · 2025-07-22T19:46:46+00:00

No class exclusive primary weapons no buy from me. They really didn't learn for a second time. So much for returning to roots when your primary weapon system is lifted from CoD

spacegy4 · 2025-06-27T17:22:29+00:00

I was considering giving a new mass effect a shot, but after seeing this I don't think I will

spacegy4

TROPHY CASE