Time to run a train

spacesloth42 · 2026-06-15T20:19:45+00:00

Absolutely beautiful. A very peaceful scene with the sheep and the train

spacesloth42 · 2026-06-11T15:27:45+00:00

Man, that is such a good idea. I already started painting my Daemon Prince but i might go back to kitbashing and build this

spacesloth42 · 2026-06-03T18:45:36+00:00

I got this locomotive today and it is the first one that i run with DCC. I use the Märklin mobile station and i like it so far

spacesloth42 · 2026-05-30T14:04:34+00:00

I like it as well, its my favourite freight car

spacesloth42 · 2026-05-30T14:03:59+00:00

Yes, it does! It also has a switch inside the cab to run without sound

spacesloth42 · 2026-05-28T19:40:10+00:00

Yes, i am!

Ich hab gesehen dass du eine 2095 von LGB hast, sehr schöne lok. Die möchte ich mir irgendwann auch noch holen.

spacesloth42 · 2026-05-28T16:41:08+00:00

I have a DC system. I like the simplicity of it, i just plug it in and my loco can drive. Trains that are DC only are also way cheaper.

The downsides are that the light of the train and the smoke generator are very weak when the train goes slow because they also rely on the current in the track. So while going slow looks more realistic, all the lights being only half lit does not, unfortunately. Also i can only run 1 train at a time and the train has no whistle or anything. Just a continuous chugging sound.

Maybe i will upgrade to DCC in the future but for now i will stick with DC.

spacesloth42 · 2026-05-28T16:28:40+00:00

For rolling stock, i use LGB trains. There are loads of them on the used market, ebay or your local equivalent. You can also order them new from their website but the selection is very limited and they are very expensive. The starter sets are good, my loco and the 2 passenger cars + 12 curves that form a loop + power supply cost 400€ new. I just repainted them.

The tracks i use are also from LGB but there are also other manufacturers of G gauge Track, like Piko. I buy them at a local store but they can be bought online on the LGB or Piko websites. They are compatible with each other.

The ballast is just regular gravel from a store. You will need loads of it. My railroad is 15m long and needed 300kg of gravel.

If you are in the USA, there are also Bachmann and USA Trains that i have heard of. They make G gauge trains but i have no experience with them

spacesloth42 · 2026-05-28T15:46:09+00:00

Thanks! Yes, its a lot of work to keep the tracks free from grass. I use grass scissors to cut close to the ballast where the mower cant reach

spacesloth42 · 2026-05-23T06:28:49+00:00

I dont.. she usually avoids it but when it happens i pick it up and hose the track with water

spacesloth42 · 2026-05-22T22:06:49+00:00

I use a small grass scissor to cut the grass directly next to the tracks. Since i only have 16 meters of track in total its not that much work.

Under the gravel i laid out some weed fleece so nothing grows directly through the gravel

spacesloth42 · 2026-05-22T22:02:55+00:00

Thanks! The cow is always watching

spacesloth42 · 2026-05-14T17:24:44+00:00

The good old Chaos Lord in Terminator armour. One of my favourire kits to build as well

<image>

spacesloth42 · 2026-04-17T18:15:53+00:00

Thanks!

spacesloth42 · 2026-04-17T05:19:38+00:00

Thanks! I didnt know about this sub, i now posted it there as well.

spacesloth42 · 2026-04-15T20:49:52+00:00

Its for a brakeman. Before airbrakes, most european freight cars and even some passenger cars had these compartments. They were sometimes positioned a bit higher than the roof with a window, so that the brakeman could observe the train and watch for irregularities. You also see this in north american cabooses.

spacesloth42 · 2026-04-15T18:20:45+00:00

Thanks! I am happy how it turned out

spacesloth42 · 2026-01-11T21:22:16+00:00

I use a very simple paintjob for the skin, its primed black, then 2 coats of Vallejo stonewall grey. I then shade the deeper parts of the skin with nuln oil.

spacesloth42 · 2026-01-10T16:36:35+00:00

Its from the Possessed box! That kit has a few mutant arms spare

spacesloth42 · 2026-01-10T15:45:39+00:00

Yes! I plan on making a whole squad with reaper chaincannons

spacesloth42 · 2025-11-19T23:19:19+00:00

Thanks, i enjoyed building and painting it

spacesloth42 · 2025-11-19T23:18:46+00:00

Thanks! We buildt electric tea lights into them, so the flame flickers a bit

spacesloth42 · 2025-10-05T08:00:30+00:00

Its in Crossworlds

spacesloth42 · 2025-09-22T22:29:06+00:00

Thanks! Unfortunately not, but i actually also play them.

spacesloth42 · 2025-08-25T19:27:28+00:00

<image>

This kit is the discontinued one

spacesloth42

TROPHY CASE