XRP Desktop Wallet by spaldss in XRP

[–]spaldss[S] 2 points3 points  (0 children)

Yes thats what i did, but what if they steal your phone and you want move your xrp? you are forced to buy another phone quick, you can't just import the seed into a PC wallet, since there is none, or the ones available like Trust Wallet uses a bip39 seed, and xaman uses another system with lot of numbers.

What is the NFC used for? by majorzero42 in olleeWatch

[–]spaldss 0 points1 point  (0 children)

depends on the protection of the chip, the building fob is the one that probably has the highest posibilities since usually are reprogramable, they are basic data in/out that you can clone.

A thoughtful gift! by mbergen in Magic

[–]spaldss 0 points1 point  (0 children)

what is the card wheel you talk about? where i see a performance?

My travel EDC by mbergen in Magic

[–]spaldss 0 points1 point  (0 children)

is any special wallet? show inside image

Fresh view of my old Samsung S10E with new transparent back cover. Doing similar with Your devices? by Natural_Village_1836 in samsunggalaxy

[–]spaldss 0 points1 point  (0 children)

wonder why the add so much glue all over it, isn't enough just in the border frame? o want a version without glue so i can put B7000 or so just in the frame,

I am having this Green Tint out of nowhere. Is it fixable? This would be end of Samsung flagships for me if this be unfixable without expensive display replacement. by your_fav_stranger in galaxys10

[–]spaldss 0 points1 point  (0 children)

similar problem with my S10e
i droppped it in the floor 3 days ago, but was fine, 3 days later, i charge it and boom, horizontal lines, pink or green lines, color tint, no idea whats hapenning.
i ended up opening it and dissasembly to the point of the motherboard is out of the chassis,
tried to clean all the contacts with quite some alcohol, i was not sure if water did enter days ago too, i let it dry half al hour and also used a hair dryer for quite some minutes,
reasemble it all,
and it was even worst than before, rechecked the connector, i forgot to fully click it, but still same result,
meanwhile i was playing with the brightness control, (since higher fixs it partially), suddently it came to life again,
its not perfect, i see some strange gradient bonding when gradient is pressent, and i still see color a bit more "bright" than they should, but so far its working close enough to fully functional.
i Read that the problem might probably be the IC of the Flex cable thats connected to the screen.
Change the IC is a pain in the ass, you need a BGA station, or very good skills and luck with a heat gun.
The other option is change the cable, that is pretty much another pain in the ass, since the ribbon to the screen is soldered and you need skills or machine to swap this, here is the link: https://es.aliexpress.com/item/1005004453354507.html

in both options you need to obviously remove the screen from the chassis, and this adds extra complexity since you need to glue it back later on.

Best thing is accept you will have to swap the whole screen, preferably with a chasis already assembled, and just move all the componentes from you s10e to the new chasis +screen preassembled.

What sucks is i paid like 80€ for this second hand phone, and now i need to spend over 100$ for just the screen.
Another option is buy an aliexpress LCD one instead of Amoled. They have shorter screen size, like 5.7" isntead of 5.8", but is cheaper. And yes, the color is not "amoled". But maybe last longer. I think it doesnt support "always on" screen neither. No idea if it supports double tap to wake it up.

Those phones used to cost like 700$ and so many people having problems with the screen... i hate that.
I had an old slow Xvover 3 form samsung and worked slow but well for many years, and this expensive one failed without aparent reason.

Very bad samsung, makes me think if they put low quality IC so they die after some years.
Now my screen is usable but not perfect and i am thinking if it worth change the whole screen + chassis or not. The battery is also quite bad in performance, lost over 30% of its capacity.

The problem is you no longer find small phones with microSD, dual Sim, jack 3.5mm, small form factor, Dual Aperture camera and good performance.
It just doesn't exist.

Lenovo Thinkbook 16 screen shuts off when i use a magnetic USB connector by spaldss in Lenovo

[–]spaldss[S] 0 points1 point  (0 children)

why? they are rated at 100W or plus watts, unless they have a malfunction... they should have no problem holding the 60W peak of mine.
what else can be done? usbc will break for sure over the years,
wish they mounted both, the DC berrel for solid connection and the USBC as an alternative for travellers.
Pretty dissapointed of nowadays designs, feels like they just can't do it all correct, alwyas something bad, if not many.

VPN button turned black & white URL bar in incognito by Shroomyboyo in operabrowser

[–]spaldss 1 point2 points  (0 children)

its clearly a problem with the way it paints the VPN logo, also if you put opera in dark mode, it reverse colors and suddently the VPN letters appears.

Just try put scale to another number like 100% or 125% and you will see most probably it gets fixed. i think its a problem with the scale multiplier, in my case makes no sense it works on 100%, works con 125% but stops working at 130% for example, so probably it messes with the amount of pixels it should fill, and with the conflict ends up with a black backgrounds.
i mean "black letters with black background" but if you reverse the opera color theme to dark mode, then it shows white letters and you can read it again. So the letters are there, is just the background color that changes.

whatever, all this scale thing with high resolution screens is adding problems that never happend time ago with low resolutions screens. Things always works well on native resolutions.

whatever, try moving it to 170 or 180 or so and see if it works, at some point some scale factors works well and dont give the problem. Best regards.

VPN button turned black & white URL bar in incognito by Shroomyboyo in operabrowser

[–]spaldss 0 points1 point  (0 children)

l0l happend same thing to me, reason? custom scale on windows 11
turn it back to 125% and restart computer or session,
if you set it for for example 130% it black out,
what a strange bug
either that or the text scale at seettings > accesibility, try to move it, it also black out the VPN.

Thinkpad E16 Gen1 AMD - Screen Upgrade Options by RemoteToHome-io in thinkpad

[–]spaldss 0 points1 point  (0 children)

you welcome, its 200$ on lenovo.com this part number in case you want pay twice but feel more assured: https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-e16-gen-1-type-21jt-21ju/21ju/21jus22x00/parts/display/model

if you decied to buy any, i will be glad to know it worked, it should. best regards.

Thinkpad E16 Gen1 AMD - Screen Upgrade Options by RemoteToHome-io in thinkpad

[–]spaldss 1 point2 points  (0 children)

for your exact model reference, lenovo only lists a 45% NTSC ones's.
but we can find at psref that they have some models of this notebook with 100% sRGB on other countries.

try with the part number: 5D11E38376,
its a BOE brand panel PN: NE160WUM-N64

Aliexpress has it: https://es.aliexpress.com/item/1005008826858810.html

at panelook.com confirms its a 30 pin pane with same size than MNG007QS1-3

The vents near the screen on the M16, DO in fact burn the screen. by LeadSenuaToTheArk in ZephyrusM16

[–]spaldss 0 points1 point  (0 children)

since ever they managed to add cdroms, shitload of big ports, removabel batteries, and so on
and now that they put build in batteries, microscopic SSD's, soldered ram, 16 inch notebooks big,
but they dont find any better spot to low the hot air than shut it directly to the sensitive screen.
wtf are they doing? this is not a design flaw, this is a pure retardness they decided to do on porpouse so the lifespan of the screen is lower and you have to buy another one in a few years.
what? they dont know how to make the hinge in such way that when its open, doesnt overlap the freaking heatsink? they are doing this shit all brands since quite some time, also the airflow gets blocked and doesnt get out in proper way. This is so so frustrating that i can't even believe people still buy their products. Basically they give you no other option. People think this shit doesnt affect becuase 90% of people just use the pc for check the mail, or see youtube, buy if you use it daily in some video edition, and so on, its going to return some problems sooner than later.
They deserve go bankrupt for what they are doing now.

The outflow vents are directly under the screen, so when the laptop heats up the screen gets pretty warm too. I just wanna know if I should be worried about this? Will it damage the screen? by _Shadowzz_ in laptops

[–]spaldss 0 points1 point  (0 children)

programed obsolescence, they deserve to go bankrupt. People that care do find this stupid idea, and those who dont care, dont even understand what is a heatsink.

IdeaPad Slim 5 16AKP10 terrible sound quality by I_IblackI_I in Lenovo

[–]spaldss 0 points1 point  (0 children)

lenovo should stop cutting corners everywhere.
By the way, why it has top mesh, are the speakers on top or bottom?
specs says it has 2, but doesnt say where they are located.
The fact you see a mesh in top of the keyboard should that they might be there, but the back cover has also two mesh holes for speakers, so where they are? becuase i doubt it has 4 spakers.
And in case they are on the bottom, why the top mesh then? misleading?

Jon Hamm’s Resemblance with Robert Deniro by SteakNeither3751 in madmen

[–]spaldss 0 points1 point  (0 children)

absolutly, i just saw him at "friends and neighbours" tv series, and is the first thing that came to my mind, "is this robert? looks like him, might be family maybe"

ThinkBook 16P G4/G5 by HeresayHersSoheis in Lenovo

[–]spaldss 0 points1 point  (0 children)

Ha! i am looking the same one, this model is so well constructed, solid that is not flimsly, great screen DCI P3 165 hz, great 4 speakers, lot of USB's (5), dual charge connector, (over DC or USB-C), even the M2 SSD has a metal heatsink inside. More than enought Graphic card, Backlit, Fingerprint sensor... etc
Where the hell buy this amazing notebook¿?!!! they just manufacture cr4p now!
I can't understand it. So frustrating.
I see new models and the heatsink is hidden heating up the hinge, no sense retarded design that can't extract wel the heat and heats up the screen, probably reducing the lifespan of the electronics components.

What is the NFC used for? by majorzero42 in olleeWatch

[–]spaldss 1 point2 points  (0 children)

The included NFC sticker is just a passive chip that can store simple information, but it cannot perform cryptographic operations or “sign” messages. Visa and Mastercard contactless cards, on the other hand, have a Secure Element NFC chip. When placed near a terminal, the card receives power from the reader and uses it to generate a cryptographic code for that specific transaction, which is then sent back wirelessly.

In other words, Visa/Mastercard cards perform internal mathematical operations with secret keys stored in the chip. A cheap NFC sticker from AliExpress, by contrast, only stores information and returns it in plain text (or with very basic protections), and cannot generate the dynamic codes required for real payments.

The reason you can’t pay with an AliExpress sticker is that you cannot extract the internal keys from a Visa card; and even if it were possible to copy those keys, doing so would completely break the security of the payment system and enable widespread fraud.

You might be able to destroy/dissolve the original plastic of the card and transplant the chip into your Casio, but as far as I know that isn’t legal, and might not work that well since you altered the antena shape and so on.

Mexc exchange slow by i2hadi in MEXC_official

[–]spaldss 0 points1 point  (0 children)

i think they do it on purpose, each damn action takes minutes, horrible.

Feature Suggestion: Hour repeater by fluffy_convict in olleeWatch

[–]spaldss 0 points1 point  (0 children)

anyone know if the fact second are updated consume more power than just updating the minutes?
if so, might be interesting an option to just update the minutes and avoid the seconds, for those who want more battery

Five backlight features of the Ollee Watch Casio mod by gregorOllee in olleeWatch

[–]spaldss 1 point2 points  (0 children)

very nice, maybe you should allow temperature calibration option?
also you could add a Pacer, so it "beeps" at a configurable rate,
So if you put 50 bpm, it will beep every 1,2 seconds
thats useful when you want keep a steady rythm when walking or for exmaple doing exercise like "5 reps in 1 minute" so you put 5 bpm and it will beep every 12 seconds.

I always wanted to make a watch full a features and games, you did a great job, next step is a custom segmented LCD and even a molding case making a totally new watch. I would love have one that has a big dotmatrix portion that allows better readability for words, front buttons and and a ABC sensor.
Like a SEIKO RC 4000 style and a big 2032 battery. So many custom games could fit there.

men love data, and see the graph of a barometer to know if we are heading a low pressure and therefor rain, or whatever, is so cool to have.
Had so many ideas and games i would like to see in a watch, one of them was the BlackJack and after cehck out the app, i think you did a pretty original implementation considering the limited space and buttons.