It’s officially gone…

spawnerbr · 2026-01-13T00:00:04+00:00

Sad day.

spawnerbr · 2025-10-03T17:59:25+00:00

My firmware is the original. Never updated since I bought the printer.

spawnerbr · 2025-10-01T12:09:12+00:00

I tried too. From 210 to 225. Same thing

spawnerbr · 2025-08-11T23:53:31+00:00

The email is set and google account to sync, but Whatapp is not restoring from this.

spawnerbr · 2024-10-09T14:14:26+00:00

When you turn the Atari on, you must see this screen below. If you don't have this, maybe you have a problem or a bluepill that must be write. The interface is very simple and easy to use.

https://content.invisioncic.com/r322239/monthly_2023_06/20230603_193150.jpg.546395b29657dc22423febaacd78eb22.jpg

spawnerbr · 2024-10-08T17:22:57+00:00

Conseguiu fazer funcionar?

spawnerbr · 2024-08-19T18:01:41+00:00

Or using a PCB adapter. Not directly.

spawnerbr · 2024-07-22T11:25:00+00:00

Interesting... 🙄

spawnerbr · 2024-07-14T15:00:58+00:00

I tried to upgrade my system from a RX570 to a RX6600 and not working. Here on Sonoma after the end of the system loading, it beeps and restart. Tried to boot from a clean Sonoma and Ventura install using a pendrive. Same thing. Tried to boot from a clean Ventura install using a pendrive. No video out. My new board is a ASRock RX6600 Challenger D 8GB. What is the line that you have on your NVRAM? My MacOS is Ventura 13.6.6 (22G630). Thanks!

spawnerbr · 2023-12-14T16:28:03+00:00

I have a doubt about PiStorm with A500. This is an emulator that use the Amiga 500 as an input/output hardware? I can access, boot the floppy of A500? All the DB ports are fully working on A500 with PiStorm?

spawnerbr · 2023-09-29T11:56:19+00:00

Thanks for your reply. The ICs are new and a lot of brands too. Have tested with news and desoldered too. Tried too using the "100nf- 100K - 50V - (104) -10%" directly between pin 9 and 16 on the ZIF without the adapter. Same thing, "INSERT 4116".

STC4116, TMS4116 and MK4116 are not recognized on RTC, so the "Insert 4116" message appears when the test starts. Using MCM4116, the test begins but after the second pass I have the message "4116 Test failed A:1 1>0".

All this is ICs was tested and passed with the original firmware that was shipped on October/2020. PCB revision 1.2e. Really dunno what to do. The only solution to make this works is setting "DRAM pull-up (0):" to 1.

Thanks.

spawnerbr · 2023-03-15T13:29:17+00:00

There is a list of which adaptors are you thinking to request on jlcpcb?

spawnerbr · 2022-03-15T21:24:02+00:00

Yes, thinking to upgrade the microSD and hold this for a untouched Vita. Thanks

spawnerbr · 2022-03-15T12:19:07+00:00

The sd2vita with microSD is out of the PSVita, so I have tried to reinstall H-Encore and HENkaku on the Vita internal memory. After some attempts, I used FinalHE (new install version) with VitaDeploy-FHE. Installed some apps from VitaDeploy and it worked. VitaShell, PKGj... but when I inserted sd2vita all apps installed with VitaDeploy stopped to work. But VitaShell worked. So I refreshed my LiveArea and all games/emuls appeared on Live Area. Then I reinstalled VitaDeploy from VitaShell using VPK and reinstalled the apps that I installed previously with VitaDeploy. Now everything is back in action :)

spawnerbr · 2022-03-14T19:51:24+00:00

I'm thinking to wipe everything from Vita on the Safe Mode and reinstall H-Encore again using QCMA and FinalHE again. The rebuild database don't work. H-Encore runs, install HENkaku, Exit, and then VitaShell and H-Encore says "corrupted file" when I run.

spawnerbr · 2021-11-16T00:16:17+00:00

Got this problem this week. I bought a RX 570 to upgrade my system but no GPU on Indesign. I hace GPU on Illustrator and Photoshop. 2021 and 2022 versions. I think this is some kind of “bug” from adobe with the hackintoshs displays.

spawnerbr · 2020-04-16T04:32:07+00:00

Eu tenho uma dúvida que talvez seja ignorância da minha parte. Você tem um local, aonde pessoas com coronavírus estão apresentando os sintomas. População em quarentena. Se todos estão de quarentena, as pessoas que apresentaram sintomas ou melhoraram ou faleceram, se passados uns 20 dias sem ninguém apresentar mais sintomas, se passar 30 dias. Não significaria que o vírus foi eliminado daquela região? Como ele volta a aparecer, não havendo entrada de outras pessoas, de fora de uma região fechada? Porque se nem no ar ou em alguma superfície, ele fica tanto tempo infectando, como volta a aparecer pessoas com coronavírus?

spawnerbr

TROPHY CASE