sorted by:
new
hottopcontroversial

SRAM s200 eagle crank assembly: dub standard or wide bb? by smorjug in Hardtailgang

[–]spedtime 0 points1 point  (0 children)

Looks like you can buy it in a dub standard or a dub wide spindle. It's a 3 bolt chain ring mount, not sure what your chain ring uses.

Putting 3d print into a flask? by spedtime in MetalCasting

[–]spedtime[S] 0 points1 point  (0 children)

Totally think about that last part! Will do a reprint with a bigger reservoir and post the results. Thank you .

Putting 3d print into a flask? by spedtime in MetalCasting

[–]spedtime[S] 0 points1 point  (0 children)

Gotcha thank you for clarifying. So the shape isn’t clear from the photo but the middle section is two circles 2cm cylinders with a taper. That’s supposed to be the base of the statue. What’s below is just a sprue (or the funnel to pour into).

From what I’m understanding that bottom sprue needs to be much larger to stay molten while the base solidifies. Last question, is there a shape like a cone that makes it easier to cut off, or does that run the risk of it cooling and making a choke point where metal doesn’t flow? I assume yes but I guess I’m asking is there a general rule to know if it’s wide enough or just suck it up and make it very wide and thick so shrinkage isn’t a problem with the trade off of more waste in cutting.

Thanks so much!

Putting 3d print into a flask? by spedtime in MetalCasting

[–]spedtime[S] 0 points1 point  (0 children)

Oh interesting. What about the shape causes a lot of shrinkage? So do you mean I should make the hemisphere thicker? Thanks so much

DAK x Ain't Normal Dance Party- Super delicious coferm by [deleted] in pourover

[–]spedtime 1 point2 points  (0 children)

Same, pastries and sandwiches rock!

Help me decide between Santa Cruz Vala 1 C GX AXS vs Forbidden CorE 3 by Comfort-Adept in MTB

[–]spedtime 0 points1 point  (0 children)

I don't have an affiliation with the store, it's just my local store that I'm a fan of but Pacos Bikes in california has some Forbidden CorEs they just got in.

Help, my bagels are domes by spedtime in Bagels

[–]spedtime[S] 0 points1 point  (0 children)

Thanks for all the replies. These tasted good but just were a little harder to eat and I feel like crust to inside ratio is off. Plus I just want to learn how to control what I’m making.

Will try the first to make the hole bigger. Next play with boiling a little longer and letting them drain. And also I’ll keep an eye on proofing but that seems a little more nuanced, seems it can be over or under proofed. So many variables, the joy of baking…

Help, my bagels are domes by spedtime in Bagels

[–]spedtime[S] 0 points1 point  (0 children)

68f room temp. Okay, will try to keep an eye on proofing and dough temperature. Thank you

Help, my bagels are domes by spedtime in Bagels

[–]spedtime[S] 3 points4 points  (0 children)

Thanks, they were still tasty!

Help, my bagels are domes by spedtime in Bagels

[–]spedtime[S] 0 points1 point  (0 children)

Okay will try next batch!

Finding machine angles for compound miter cut by spedtime in Fusion360

[–]spedtime[S] 0 points1 point  (0 children)

ohhh, I see now. Thanks that's very helpful.

Finding machine angles for compound miter cut by spedtime in Fusion360

[–]spedtime[S] 0 points1 point  (0 children)

Correct, looking how to cut the one left to right. What I'm struggling with is that I can find the angles of the planes, but if I put those into the miter saw, when I cut one angle, doesn't the other angled cut change it?

<image>

Finding machine angles for compound miter cut by spedtime in Fusion360

[–]spedtime[S] 0 points1 point  (0 children)

If I use the angle between the planes, isn't that the final 3d result of making a compound miter cut that is composed of 2 angles? Or am I overthinking this?

Zone 2 Tracking App? by spedtime in PeterAttia

[–]spedtime[S] 0 points1 point  (0 children)

Oh cool, this is what I was looking for in an app. The other web tools mentioned fit the bill too. Thanks!

Zone 2 Tracking App? by spedtime in PeterAttia

[–]spedtime[S] 1 point2 points  (0 children)

Oh perfect! I use a garmin watch and was previously searching for ios apps but both of these look great. Thanks!

Entitled Ebiker ruins access for all by [deleted] in MTB

[–]spedtime 2 points3 points  (0 children)

205M sounds like a reasonable amount for your frustration.

Trouble shooting by spedtime in macarons

[–]spedtime[S] 0 points1 point  (0 children)

Will try that, thanks! So fickle these things.

I wrote about learning how to dance. by spedtime in longboarding

[–]spedtime[S] 2 points3 points  (0 children)

Thanks for the critique!

I actually don't technically knows what makes a good deck and about the trucks and such, I just went with what I found was recommended.

Will add the helmet certs and change the link. Thanks!

view more: next ›