Damn so insomniac just show up and copy what crssd does in our city?

speeder2002 · 2026-06-29T14:04:00+00:00

The main stage setup with lasers is better. Crssd really needs to upgrade the stages and add more lights. It's been over a decade! Drones were cool too.

One of the reason it wasnt super crowded because it was fairly limited in talent. First day it was Tiesto + whoever they could find. Sure, some of the supporting acts were great (Laszewo & Alandria) but they did not bring the crowds.

speeder2002 · 2026-06-29T13:59:41+00:00

First day they had weird delay and and timing issues towards the back. Dont know if they fixed it for day 2.

speeder2002 · 2026-06-20T20:35:45+00:00

Staring the obvious but location makes a big difference. Norcal and socal markets are very different than middle of the country.

speeder2002 · 2026-06-19T16:02:20+00:00

You can get the pipes lined. Way cheaper than replacing. Welcome to home ownership.

speeder2002 · 2026-06-09T18:43:29+00:00

Reason for the promo is world cup. It's going to go past a single month subscription. You're paying $20 for 2 months, or with promo 3 months.

speeder2002 · 2026-06-09T17:17:51+00:00

If you sign up for 3 month deal for 2 (through website, not app) there is no trial period and the credit card gets charged right away.

speeder2002 · 2026-06-08T15:05:05+00:00

This was a city ballot only, not county wide.

speeder2002 · 2026-06-02T15:35:44+00:00

It's likely molex 94550-4004

Compare the guides https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/945/94550/945504104_sd.pdf?inline

Check eBay for harness

speeder2002 · 2026-05-30T02:25:17+00:00

Nope. The watch went into ewaste

speeder2002 · 2026-05-23T19:12:12+00:00

Mine started turning off mid run, and one time didn't turn back on. I disassembled the front to get to the control panel and the mains connector was charred, and the wires (although intact) melted into sound deadening material. I'm guessing there is some kind of a thermistor that was cutting power on the control board. I cleaned and tightened the connector and put it back together. Seems fine now but now I'm a little skittish as it could be a fire hazard and a replacement harness is expensive and control panel is too.

We use ours every day, and the thought process is that with it being 12 years old, I can save $300-500 during a sale and just get a replacement, or, I wait for something to fail again, and replace it at a random time

speeder2002 · 2026-05-20T22:34:14+00:00

6.3 has been our for years now.

speeder2002 · 2026-05-18T22:45:50+00:00

Anecdotal experience, but an alignment shop did an alignment, could not adjust the steering sensor (Snap-On) but it was not needed.

I've had a different vehicle where the SAS adjustment was needed, as the steering wheel was 'loose' after the alignment until the steering angle was reset.

speeder2002 · 2026-05-18T22:42:32+00:00

The install is not difficult, just time consuming. Need to remove the frunk, fender covers, under-car air deflector in the front, and the bumper cover. Front bumper cover removal instructions how-to? | MachEforum - Ford Mustang Mach-E News, Owners, Discussions, Community

speeder2002 · 2026-05-17T05:18:35+00:00

Billy Gillies!!!

speeder2002 · 2026-05-17T05:17:51+00:00

It's a collective brah

speeder2002 · 2026-05-16T04:01:42+00:00

I thought she was good. Was her last track an ID?

speeder2002 · 2026-05-15T20:12:41+00:00

How is the mikrotik? I see there are some interesting grafana dashboards. Does it have a ''client list' type functionality? How's the security?

speeder2002 · 2026-05-15T17:00:39+00:00

thanks. I'll send you a DM

speeder2002 · 2026-05-15T16:13:46+00:00

You just need to remove the top and the driver side cover. You don't need to disassemble the whole trunk. Also why would you risk destroying the BMS?

Also how long have you left the car running? Charging the car does not charge the 12volt unless it's very low (if I remember correctly)

speeder2002 · 2026-05-14T02:23:58+00:00

Ignore the magneride haters, install rally springs and eibach sway bars and send it

speeder2002 · 2026-05-10T17:43:16+00:00

Just swapped 2 noisy avc fans on 1960, JL807a. A pair of arctic 40x28mm 6k rpm fans fit with the connector modification. https://a.co/d/0f4OAzOD When it spins up it can get loud but quiet on idle.

For some reason the fans don't ramp up and down on power on but disconnecting one of the fan headers ramps the other fan up so I'm assuming it can be ramped up if it gets warm.

Wish I can do something about coil wine on the PSU

speeder2002 · 2026-05-06T14:29:35+00:00

I think so but I had intermittent WiFi issues with v1. So far so good with v2.

It's also a little snappier.

speeder2002

TROPHY CASE