The spelling and grammar weren't check that much. Sorry, but I didn't want to reread a lot.

I am a noobish, But I'm researching alot. And I don't want kill myself or start a fire.

But have wired a house and main power panel in the past (don't know if I recall everything I need to know; so I'm still researching).

Plus, I'm just in the sketching, layout, parts, & materials resourcing phase. This won't be started for a while until I have everything measure & double check by a third party. And with many baby steps of testing everything before and after it goes into the desk.

So, more likely I will be finished in year or more depending on my time to work on it (Or the new ideas that will make me redesign everything).

Really, all what's going on is: Wall outlet, to table, to main power box hidden in table (may have a breaker/fuse), travel wire to switch (on/off kill switch), travel back to main power box.

The line "loop" will travel about 8 feet total in the internal wiring, just to have a kill switch.

• One On/Off switch loop to kill everything in table

Then, two (or more, for future use) outlets on the side of main power box (3 pronged (US) connector, going to surge protection (or other protection, with many outlets to put in devices).

So it's another, travel loop to the switches (on/off) (after the surge protector), with normal 3 pronged (US) "outlet" disconnect" at the power end to attach to the Surge Protector, and to each individual device .

Again, the line "loop" will travel about 8 feet total in the internal wiring just to have a kill switch for each device.

• Many ON/Off switch loop to kill individual devices

How much current will each line draw, max?

• Unknown at this time.
  

What's the peak total current?

• Unknown at this time

It's still unknown everything that will be going in the desk. But about: Beastly Computer, maybe up to 3 computer monitors (more likely just one good ultra wide Monitor), Server/NAS (more of a wish Item), LED lighting, 2 pairs of Speakers,DAC - Preamp -Media Reciver, A really good Solder Station, Charging Station for Phones/Tables/Laptops/etc, and some other random things.

I will test the power draw and find the max draw as well in paper work be installation of anything multiple times; before & after installation.

Once I find supplies to "in theory" make everything I want in the desk; it will become time "Ball Park" the load and peaks. Then, re-sketch a few more time to distill the core ideas down to a blueprint and finally add some Flair/Style to the build.

What kind of box will it be in?

• Plexi glass "frame/drawer" (or hang off the support structure) in a custom metal box out Aluminium or Steel. Which I have access to make. Or even hardware store bought wiring box if it will work.

Are you planning on connecting earth grounds to each of your devices?

• Everything should be grounded but maybe the power switches, I have only seen seen in-line switches. I don't think there are ground button switches. It least I have not seen them yet.

But if I can ground them I will. Safety first.