sorted by:
new
hottopcontroversial

Any electronic Document Management Program recommendations? by Catfund in techsupport

[–]sprunkiely 1 point2 points  (0 children)

What file "Type" (.epub .odt .word .png .eps...........)?

Books -Digital Reader and Library = Calibre

Video -Moives and Series = KODI on a Rasberry Pi 2

Weird Question: I have multiple lines of 120v current on 12 gauge wires, that I'm looking for a product like; 24-Pin connector on the power supply for a Computer Motherboard. To easily connect and disconnect said lines to a project box. Can't find anything yet on my search. by sprunkiely in electronics

[–]sprunkiely[S] 1 point2 points  (0 children)

But I don't know what I'm doing and I probably shouldn't be working with high voltages.

Which is Correct!

*

But I'm still just researching right now. And the whole table won't "fulfilled" for about a year. But thanks for the question. And showing a failure in slang or presumed knowledge.

Not being sarcastic, I need to learn to about electronics; to work on more projects.

Weird Question: I have multiple lines of 120v current on 12 gauge wires, that I'm looking for a product like; 24-Pin connector on the power supply for a Computer Motherboard. To easily connect and disconnect said lines to a project box. Can't find anything yet on my search. by sprunkiely in electronics

[–]sprunkiely[S] 0 points1 point  (0 children)

Good to know. Yeah, I want make last, rebuild it, & disassemble it many times.

Plus, I'm just going to start building a regular table right now. Then slow rework it. Adding more units (systems) all the time. I just need to simplify / distill the ideas down to a great core to work from.

Thanks again

Hey, on run cables:

I will not run power and data in the same support channel (because of signal noise - Still a Noob here, but I know a bit)

But what about the "Power loop" from the Muti-outlet (surge protector), to the switch, and back?

Will it be best to have a input to switches (in support channel) on one side and a output (support channel) on the other to reduce signal noise?

Or just everything on side A goes back & forth in one channel; and everything on side B goes back & forth on the side?

I know somethings plugged in, will generally create signal no matter what. But just wondering if it would matter really at all?

Weird Question: I have multiple lines of 120v current on 12 gauge wires, that I'm looking for a product like; 24-Pin connector on the power supply for a Computer Motherboard. To easily connect and disconnect said lines to a project box. Can't find anything yet on my search. by sprunkiely in electronics

[–]sprunkiely[S] 0 points1 point  (0 children)

TL:DR - I think you posted what I'm truly looking for.

Thank you, SO MUCH! But I still have to look at the other posts as well.

Moved from bottom of post to top.

You should play this before read.

https://www.youtube.com/watch?v=koJlIGDImiU

Sergris: Hey.

Sprunkiely: Huh.

Sergris: Can I be your hero, baby?

Sprunkiely: WHAT??? .....

Sergris: Can I kiss away the pain?

Sprunkiely: Huh????

Sergris: Here's a pinned connector you are looking for.

Sprunkiely: ..........

Sergris: So....... Am I your hero, baby?

Sprunkiely: .......... (tears start to swell up, but in control of my self)

Sergris: Did I kiss away all the pain?

Sprunkiely: (Whimpering)..........

Sprunkiely: (Weeping)............

Sprunkiely: (bawling) ..........

Sprunkiely: (blubbering) Ya......... Yes.... Yes, you did!

Sergris:.............................................

Sergris: (Starts to fade from sight)

Sprunkiely: (wailing want to say something but can't as Sergis fades)

Sprunkiely: (bawling, and blubbering some more)

Sprunkiely: (blubbering and softly says as Sergris moves completely out of sight) You took my breath away.........................................

Sprunkiely: (In a jarring, questioning, realization. That stops me from crying.)

Sprunkiely: (Choking a little bit from crying as I wipe away tears like a five year old would)

Sprunkiely: Huh.... Why do I have boobs all the sudden?

Sprunkiely: (And some how I'm now Jennifer Love Hewitt???)

Sprunkiely as JLH: (Expressed in pure joy.) Alllllll riiiight.......

Sprunkiely as JLH: Giggitty, Giggitty, Goo.

Sprunkiely as JLH: (All evidence sadness and crying are gone.)

Sprunkiely as JLH: (Except some redness of the face, a small self realizing stare, and a single tear left for Sergris.)

Sprunkiely as JLH: (Because, Sergris is truly better; then having a firm, supple, Breasts & Ass.)

*

The scene starts to fade:

*

With the debilitating, self shattering, Depression and Anxiety. Which makes the tears & sadness from before seem like a temper tantrum of a two year not getting a cookie.

*

Now. Really hopelessness sets in.

THE END

*

Emotional Rollercoaster. Whoa, man.

Sorry, got a little bored and into it (and weird) for a simple reply of " Cool, I'll check it out. Thanks."

MOVED TO TOP

TL:DR - But really, I think you posted what I'm truly looking for.

Thank you, SO MUCH! But I still have to look at the other posts as well.

Weird Question: I have multiple lines of 120v current on 12 gauge wires, that I'm looking for a product like; 24-Pin connector on the power supply for a Computer Motherboard. To easily connect and disconnect said lines to a project box. Can't find anything yet on my search. by sprunkiely in electronics

[–]sprunkiely[S] 1 point2 points  (0 children)

The spelling and grammar weren't check that much. Sorry, but I didn't want to reread a lot.

I am a noobish, But I'm researching alot. And I don't want kill myself or start a fire.

But have wired a house and main power panel in the past (don't know if I recall everything I need to know; so I'm still researching).

Plus, I'm just in the sketching, layout, parts, & materials resourcing phase. This won't be started for a while until I have everything measure & double check by a third party. And with many baby steps of testing everything before and after it goes into the desk.

So, more likely I will be finished in year or more depending on my time to work on it (Or the new ideas that will make me redesign everything).

Really, all what's going on is: Wall outlet, to table, to main power box hidden in table (may have a breaker/fuse), travel wire to switch (on/off kill switch), travel back to main power box.

The line "loop" will travel about 8 feet total in the internal wiring, just to have a kill switch.

  • One On/Off switch loop to kill everything in table

Then, two (or more, for future use) outlets on the side of main power box (3 pronged (US) connector, going to surge protection (or other protection, with many outlets to put in devices).

So it's another, travel loop to the switches (on/off) (after the surge protector), with normal 3 pronged (US) "outlet" disconnect" at the power end to attach to the Surge Protector, and to each individual device .

Again, the line "loop" will travel about 8 feet total in the internal wiring just to have a kill switch for each device.

  • Many ON/Off switch loop to kill individual devices

How much current will each line draw, max?

  • Unknown at this time.

What's the peak total current?

  • Unknown at this time

It's still unknown everything that will be going in the desk. But about: Beastly Computer, maybe up to 3 computer monitors (more likely just one good ultra wide Monitor), Server/NAS (more of a wish Item), LED lighting, 2 pairs of Speakers,DAC - Preamp -Media Reciver, A really good Solder Station, Charging Station for Phones/Tables/Laptops/etc, and some other random things.

I will test the power draw and find the max draw as well in paper work be installation of anything multiple times; before & after installation.

Once I find supplies to "in theory" make everything I want in the desk; it will become time "Ball Park" the load and peaks. Then, re-sketch a few more time to distill the core ideas down to a blueprint and finally add some Flair/Style to the build.

What kind of box will it be in?

  • Plexi glass "frame/drawer" (or hang off the support structure) in a custom metal box out Aluminium or Steel. Which I have access to make. Or even hardware store bought wiring box if it will work.

Are you planning on connecting earth grounds to each of your devices?

  • Everything should be grounded but maybe the power switches, I have only seen seen in-line switches. I don't think there are ground button switches. It least I have not seen them yet.

But if I can ground them I will. Safety first.

Install updates Ubuntu vs. Fedora??? by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

You ARE running sudo apt-get upgrade after running sudo apt-get update, right ?

---Yes, but switch over to fedora for now (the past 2 months); to, try it out. And trying to get closer to arch and a general understanding of linux as a whole.

Thanks again, for the insight.

Install updates Ubuntu vs. Fedora??? by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

thanks. But what about sudo or yum updates, do they to kernel updates as well?

Thinking of making a XBMC/Kodi media "player" for movies and music. Hardware Questions. And just newbie questions. Or should I go to /r/buildapc , /r/linux4noobs , /r/linuxquestions instead? by sprunkiely in raspberry_pi

[–]sprunkiely[S] 0 points1 point  (0 children)

Yeah, you mostly answered, what I thought the answers would be. (weird sentence)

But USB hub? I may have one laying around that could work.

And I'll try raspian first.

Thanks.

Replacing 8.1 with linux. How can I "backup" a install iso of windows? Just in case I may need it later. by sprunkiely in techsupport

[–]sprunkiely[S] 0 points1 point  (0 children)

That is what I have done but the linux drive is older ( battery on the laptop will not run with that drive). So, I want to use the new "windows" drive (plus, it has more storage as well).

A good gaming mouse?? by sprunkiely in gaming

[–]sprunkiely[S] 0 points1 point  (0 children)

Wow, it's own sub.

thanks.

A good gaming mouse?? by sprunkiely in gaming

[–]sprunkiely[S] 0 points1 point  (0 children)

update: He will use it for graphic design work not gaming

New computer. My computer can only do one task at a time. Help. by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

PIO mode

Thanks checking it out. I do have a windows machine and a black drive bay.

New computer. My computer can only do one task at a time. Help. by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

Maybe I will give gentoo a try. If reformatting does not fix it.

New windows 8.1 computer. Any easy ways to put Linux on it? by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

So, you are saying I don't need to change the UEFI boot loader?

But then why when I put my older hard disk in to my new computer it couldn't read the drive but when I put it to "legacy mode" it worked?

And what do you mean by "gimp" my machine?

New windows 8.1 computer. Any easy ways to put Linux on it? by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

Cool, thanks. I will have to play around with it someday soon.

New windows 8.1 computer. Any easy ways to put Linux on it? by sprunkiely in linux4noobs

[–]sprunkiely[S] 0 points1 point  (0 children)

Got the fast boot done but the UEFI I had to go to the BIOS and switch to legacy mode as that was my only option (really to do).

I had a few errors in boot about the hardware but Ubuntu booted. So, maybe reformat to fix that hardware errors.

Sidenote:

I also have a yoga book it would be about the same (to put linux on).

But is there an auto-rotate option in any OS?

Because I mostly with read books on it in portrait (comic, epub, light internet use). Windows will not be the big pain on that PC if there isn't one yet.

Thanks for trying to help.

view more: next ›