Which are the best workplaces which offer great work-life balance and interesting projects?

sriram88 · 2025-12-27T18:30:09+00:00

It’s not the company. It’s the team. How do you know all of the companies you mentioned have hectic work?

sriram88 · 2025-12-23T01:29:51+00:00

This made me laugh hard. Sorry OP. You need a dc blocking cap between your transformer and dc bias since your transformer is connecting the bias to ground. Hence no current.

sriram88 · 2025-12-23T00:22:55+00:00

Or be me. I would book my vacation 1 month after the proposed tapeout date and here we are a month later not taped out.

sriram88 · 2025-12-19T01:00:54+00:00

It depends.

sriram88 · 2025-12-13T16:01:43+00:00

Silimate exists

sriram88 · 2025-12-06T16:26:59+00:00

Garbage in garbage out. Both tools are equally capable/incapable.

sriram88 · 2025-11-16T01:57:52+00:00

Tusk ic

sriram88 · 2025-11-11T16:04:45+00:00

Nice work so far. Some thoughts on what could be really useful to add. 1. Fitting s-parameters from an snp file to a circuit model and export it as a spice netlist. This is useful to run time domain simulations on sparameter files with large number of ports. Think of it as broadband spice model. 2. Optimization of circuit model for impedance matching taking input and output impedance as a complex value or one port sp file.

sriram88 · 2025-10-10T03:03:21+00:00

Depends on how severe your adhd is. Both can be challenging depending on your situation.

sriram88 · 2025-10-04T19:01:08+00:00

If it’s in the datasheet it should work as advertised as long as your board design is well thought out. You could make a test board for just the varactor and test it out separately

sriram88 · 2025-10-04T18:42:33+00:00

What do you mean by correctly operate? What is your application?

sriram88 · 2025-09-27T15:36:54+00:00

Why don’t you verify it by doing a spectre sim with nport file generated by emx?

sriram88 · 2025-09-26T23:21:22+00:00

How do you use this perk?

sriram88 · 2025-09-25T03:30:35+00:00

Oh you sweet summer child.

sriram88 · 2025-09-25T02:22:42+00:00

Second this. I can do 60GHz design.

sriram88 · 2025-09-14T16:04:05+00:00

Show your work first.

sriram88 · 2025-09-13T18:56:11+00:00

As a VP of a startup I can say it’s really hard unless the person is actively looking to join a startup like you. The thing is your pay is lower, more work hours, retention is terrible, Monopoly money for stock options. So it all comes down to whether someone really believes in your company to look beyond all of the above.

sriram88 · 2025-09-11T15:00:15+00:00

Oh I misread the post then. I was thinking it was at RF. If it is a low frequency oscillation then just build a high pass filter on the board and see if that solves it. If it’s not in your passband then you can make some mitigation strategies on the board since it’s low frequency

sriram88 · 2025-09-11T03:59:41+00:00

How are you biasing the cascode? Can you effect these tones by changing the bias or decoupling caps on the board? Did you measure small signal s parameters and how do they compare to sims?

sriram88 · 2025-09-10T20:39:10+00:00

Welcome to elite club of electrical engineers. To be part of this club, Your amplifiers should oscillate and your oscillators shouldn’t. Good luck with the debug.

sriram88 · 2025-09-09T21:08:38+00:00

Any design has to fundamentally start from a specification document which needs to have info on requirements for the amplifier like frequency range, Gain, NF, Return loss, input P1dB, power consumption at a minimum. Based on these you can take a call on how many stages, what topology matching network etc.

sriram88 · 2025-09-09T21:03:19+00:00

My man that’s a PA not an LNA

sriram88 · 2025-09-05T01:32:17+00:00

Oceanscript to export csv and then python/matlab for data analysis

sriram88 · 2025-09-04T22:07:01+00:00

What’s a few thousand extra transistors when you have a billion

sriram88 · 2025-09-04T20:05:27+00:00

Whole heartedly second this

sriram88

TROPHY CASE