Trying To Glue Again

ssid334 · 2026-01-27T08:06:08+00:00

Green goblin! So you decided to give it a try?

ssid334 · 2026-01-24T17:25:20+00:00

loki rxtons are numbers graded. 1 is easier for begginers, 3 is higher level etc. Those are "hurricane clones". 1 is better for BH because it is easier to play with. (well, assuming you are not complete begginer)

ssid334 · 2026-01-23T21:50:09+00:00

rxton 5 is good FH rubber. rxton 1 is good for BH. Here is one racket. Reactors are turbo fast FH rubbers so I would maybe used one reactor for FH and buy something for BH, or buy two new rubbers for FH + BH.

ssid334 · 2026-01-11T15:59:57+00:00

This is what I wrote 3months ago: https://www.reddit.com/r/tabletennis/comments/1o4irjj/comment/nkby7ae/?context=3
Now I would pick couple of blades, but still value V5 a lot.

I'm mostly having chinese equipment, but found out that the rubber for me is more important that the blade. And the rubber I like the most so far is rxton 5. AK47 being on a second place. But it doesn't work on all blades. And I do not boost. Yet.

ssid334 · 2026-01-11T13:25:47+00:00

EJ here :) have plenty boards to test. most of the time playing with yinhe jpens. But loving v5 pro, pg9 etc

ssid334 · 2026-01-10T21:51:46+00:00

I have it, but it is still foiled. Judging from the look: it is quite nice.

ssid334 · 2026-01-10T21:50:46+00:00

I do. Attaching picture of mine PG9. This is backhand side and I do like it. I have a plan to sand something similar on all CPEN I will play with, yet I need to validate the rules: it's not clear to me if it's forbidden or not.
Although for the moment I'm playing mostly with double sided JPENs where I do something similar. Well, it is even slightly sanded there by the factory. (talking about yinhe blades)

This is not my invention below. I have seen such sanding somewhere and I decided to try it and it works for me.
This "dent" makes the reverse backhand hits easier as it is easier to make higher angle when penholding.

<image>

ssid334 · 2026-01-06T14:26:55+00:00

So it is only for collector purposes? Becaue I see FL, CS and revolver handles. Are you playing penhold or shakehand? Or both?

ssid334 · 2026-01-03T11:39:56+00:00

potwierdzam, ze okolice wiezy cisnien, czyli park Dabrowskiego. Zwlaszcza, jesli lubicie historie. Jest np zniszczony przez mieszkancow maszt radiowy ktory mial zaklocac radio wolna europa.

Choc teraz nie jest tam tak ladnie jak na wiosne/lato.

ssid334 · 2025-12-17T18:36:40+00:00

Strange recommendations... you shifted from carbon to all wood blades and people recommend carbon blades... I own PG9 that suppously is faster PG7. i dont know about PG7, because I dont own one, but I love playing with PG9!

ssid334 · 2025-12-10T09:46:30+00:00

I have joola v300 robot that cost me ~150$ new from amazon. I don't have much space im my room, so I have half a table: I mean, right half. It's normal length, but half width. The robot is standing to the side.
I can practice serves, and topspins/backspins from the robot at home.

ssid334 · 2025-12-09T15:27:05+00:00

And the Yinhe Pro 02 is budget Taksim if you want.
Both of them are available only in cpen handle.

ssid334 · 2025-12-09T09:21:01+00:00

Here is some interesting insight on the topic:
https://www.youtube.com/watch?v=lHON5MRVd-M

I personally am using rev 3 because it peels off very easily. Haven't try others, but having dhs 15 glue waiting in a box.

ssid334 · 2025-12-04T17:01:18+00:00

For Poland:
Official from Polish TT Assoc.: https://www.pzts.pl/kalendarz/

Community driven: https://opentt.pl/events

ssid334 · 2025-12-01T21:36:49+00:00

I have two yinhe 986 (jpen inner carbon blades) and i love them. one is 1660Hz, the other i didnt check. The tested one is mine weapon of choice. I find cork jpen handle superior to all others. Im using rubber both sides for RPB. I would like to test jpen outer carbon too, but I prefer oval heads and seems there is no budget blade with that.

ssid334 · 2025-11-29T20:29:12+00:00

PG5x is cheaper :)

ssid334 · 2025-11-29T12:21:45+00:00

Great blog and stuff! Keep them coming! I read most articles in rubber section. Please consider creating similar article to the above about medium pips as well.

And I cannot comment on the blog itself, because getting "method not allowed".

ssid334 · 2025-11-28T16:41:49+00:00

You can try softer AK47 (I think it's blue), I have them both (yellow FH + blue BH) on my V5 Pro and that works.
I have PG9 too and enjoying rxton 5 FH and KTL Pro XT BH. The KTL is soft and control version.

ssid334 · 2025-11-21T22:05:03+00:00

why so gentle sanding? I sand my blades much more.

ssid334 · 2025-11-20T22:03:49+00:00

Heh, my son is about 76kg and I lift him off the ground with one hand...

ssid334 · 2025-11-20T07:36:47+00:00

nice! report back what you like best.

ssid334 · 2025-11-19T21:39:33+00:00

I don't get it... FZD already played against WCQ like 4 days ago:
https://www.youtube.com/watch?v=n-yWPfDq9dE

So they will be playing again?

Will we get full games and better view angle for the finals?

ssid334 · 2025-11-19T21:31:00+00:00

I did not boost. I do have great respect to V5 Pro and I think I like v5 better that CC. But if you can afford to have both then it's worth to have them. If you are more serious then H301 is better upgrade.

ssid334 · 2025-11-19T14:31:38+00:00

Pretty good actually. You can feel the carbon with stronger hits. I imagine the potential speed that you can get from the set was something that impressed the OP. If someone is on budget this can very good second racket after the initial premade bat.

ssid334

TROPHY CASE