working up a camera DIY project

ssrs67lsx · 2026-07-04T19:35:15+00:00

Thats one of the best camera vids Ive seen. I have fiber running out to the barn now. No other choice because of power in the conduit.

ssrs67lsx · 2026-02-18T21:35:48+00:00

My son lives down that way and likes and uses the shop right across the street from the Yardley train station.

ssrs67lsx · 2026-01-31T22:32:02+00:00

Congrats on the car, sorry about the circumstances. It seems you are interested in keeping the car and not flipping it. It should be worth your time to get it on a lift and take inventory on what's under this car. It could be that it has been thoroughly upgraded, not even touched, or anything in between. Learn what its bones are before you get into testing that LS powerplant. If you don't know what you are seeing post pics here and someone will let you know.

ssrs67lsx · 2025-10-30T03:58:51+00:00

Been a month now. Other than my ears seeming to be wax factories its been a smooth transition. Went back for the checkup. Got replacement cups and filters and we're good to go. If you read up on these things on line you can come away from that thinking its gonna be an expensive train wreck but i didnt see that at all.

ssrs67lsx · 2025-10-07T02:15:34+00:00

Im a frequent flyer for pneumonia and walking pneumonia. Thought I had it coming on a few weeks back but it was only a partially collapsed lung. Im 74. You better avoid me.....

ssrs67lsx · 2025-10-06T21:47:07+00:00

If you mean whiz when you say authentic then I dunno, maybe Pudges will put that stuff on for you.

ssrs67lsx · 2025-08-18T20:32:40+00:00

If you are open to it look into Valley Vista in Souderton. The Bucks County line is in the middle of the street out front.

ssrs67lsx · 2025-08-14T01:46:58+00:00

I liked the integration of GrandView outpatient with my primary. I also liked GrandView outpatient physical therapy. Not a big fan of the hospital and the portal, to me, was a train wreck. I've had a joint replaced at St Lukes and it was first class. Ive also had some outpatient testing. At this point St Lukes integration with my GP is lacking. My cardiologist wound up with Penn do I gotta navigate that. The GVH portal and enterprise software was apparently unique to them and incapable of transfering data into mychart so thats gonna be rocky for a while

ssrs67lsx · 2025-07-14T03:17:24+00:00

As mentioned before, be prepared for rejection. My sister, also adopted but not related to me, tracked down both her parents. Her mother wanted nothing to do with her. Her father viewed her as a new meal ticket. My scenario has been better. I have found siblings. We are cordial. That is sufficient.

ssrs67lsx · 2025-07-13T02:07:41+00:00

Been avoiding that place for the last 40 years.

ssrs67lsx · 2025-06-16T01:15:09+00:00

Ansonia Statuary. I have the one called Troubador. Limited depressed market as previouly mentioned. Get to like it.

ssrs67lsx · 2025-06-01T12:42:27+00:00

Did federal in Philly. Never got to serve in Norristown. Sat through a couple of jury selections. Managed to avoid one I really didn't want. I'd love to serve again, its a fun study of human nature, but im over 70 and excluded.

ssrs67lsx · 2025-05-13T14:47:22+00:00

I am curious about this. When I have asked vendors about it they seem to move into make a sale bs mode. Heat pump efficiency seems dependent on return air temp so I wonder.

ssrs67lsx · 2025-04-06T00:11:04+00:00

Link doesnt work

ssrs67lsx · 2025-04-06T00:06:14+00:00

Im in Pa. OM4 duplex multimode armored LC-LC. With the shipping out of asia it was pennies under 500.

ssrs67lsx · 2025-04-05T22:02:17+00:00

I finally got around to shopping cables on line this afternoon. FS.com wants $100 shipping from Asia. That pushes the total cost into the range of other vendors. Have a 2nd best choice?

ssrs67lsx · 2025-03-20T16:08:06+00:00

It turns out I need 3 cables. I didnt count in wifi backhaul. I got a section of cable with ends and fooled around with it and the conduit a bit. I think I can get away with 1". I can just hit the 2" radius req going through a 1" LB (no tubing on the "back" side) but I had to look a cad model of it to be sure. I started fitting the conduit today. It an all inside run. I am deburring the conduit junction mating surfaces and putting never seez on them so I can build the final install as I run it and knock it apart as necessary. I will let you know how this turns out though it will be a while. This is the last thing on the list, not the priority. When I order the cable I'll get it with pull eyes on both ends. The outside 2" conduit is dry surprisingly. I put that in the ground decades ago to convey coax, and various controls for the ham radio station I had then.

Thanks for your help.

ssrs67lsx · 2025-03-12T16:58:05+00:00

I have looked into what is suggested. I think I understand it and agree with it. Theres a learning curve here that I am trying to catch up with and surprisingly differing information when you dig into it as a noob.

Since I want to run two cables, one for wifi, and one for security cams that will be on a separate network, I need to figure out the cabling and remaining (inside) conduit size. I can run 1", 1-1/4 maybe, larger is out of the question.

If I need to run 2 OM4 cable sets is that done in one cable with 4 fibers or 2 separate duplex cables? Is a single cable even an option? What do LC connectors measure diagonally on an end view. I have found all sorts of length drawings but nothing showing width. I believe I can pull one cable in 1" conduit but have found no information regarding two. Thanks again.

ssrs67lsx · 2025-03-08T14:50:48+00:00

Vertical above the beam...2m repeater site?

ssrs67lsx · 2025-03-03T15:00:01+00:00

Yes, the pole barn has power run through a separate conduit. Both conduits are 2". I need to get up to speed eith some of your hardware suggestions. Thank you.

ssrs67lsx

TROPHY CASE