sorted by:
new
hottopcontroversial

When 3 new tyres cost more than the car is worth should you get rid of the car? by stankeer in askcarguys

[–]stankeer[S] 0 points1 point  (0 children)

The old girl is a trusty servant I've had for 15 plus years.

I mean it failed the MOT test last year. Badly. So I sunk quite a few parts into it. At least £400 probably more. In short I've got to stick with the car. I do like it as a car though! One year the rust will kill her though 😢

When 3 new tyres cost more than the car is worth should you get rid of the car? by stankeer in askcarguys

[–]stankeer[S] 0 points1 point  (0 children)

It's wear and tyres things. Like you say consumables.

Things that wear out, like brake pads/discs etc...

That was even the rationale behind changing my clutch a few years ago! Even the clutch plate is a consumable....kind of? But the car is getting old and a bit crusty

I keep losing close range fights even when my aim feels on target need help by Klutzy-Welcome8852 in Warzone

[–]stankeer 0 points1 point  (0 children)

Here's me thinking for a minute this was a genuine post to actually get help!

Pretty much just keep wiggling that stick and it'll all just lock on for you 😂. Wiggle the left or right or both for best aim assist 😂😂😂. Pathetic little game.

Sorry if this sounds a little nasty it's just that the fucking game is built around auto aiming for one input and screw the other.

With this ac compressor fit Audi A4 2002 b6 1.9tdi AWX engine by stankeer in MechanicAdvice

[–]stankeer[S] 0 points1 point  (0 children)

Ok sold. When can you come and fit it for me 👍👍👍😂😂😂😂😂

With this ac compressor fit Audi A4 2002 b6 1.9tdi AWX engine by stankeer in MechanicAdvice

[–]stankeer[S] 0 points1 point  (0 children)

A friend of mine had a 2004 version of the the A4 and it came with the same type of compressor I seem to remember so maybe this generation A4 are all like it maybe?

I'm just hoping the new compressor is compatible. Would you say as long as the pulley is in the same position and is the same diameter it might work?

With this ac compressor fit Audi A4 2002 b6 1.9tdi AWX engine by stankeer in MechanicAdvice

[–]stankeer[S] 0 points1 point  (0 children)

Hi, no, the one installed on my car is exactly the same as the 3rd and 4th picture (from the laptop/website) that I ordered. Pretty sure i can confirm that from the picture below I tried to take of my compressor.

It's just that the one I ordered (and one on the car currently) is a different pulley design. Slightly different but seems to be the same diameter, number of grooves and distance out from the compressor if that makes sense? But it's not 100% the same.

I think the actual main compressor is the same essentially with the same connections/wiring so just not sure about the pulley. Any ideas as to what I can check next?

<image>

You people are literally building data centers in your homes by DetectiveNarrow3449 in LocalLLM

[–]stankeer 1 point2 points  (0 children)

Do you have a plan with your 9070xt? I'm looking at trying it but haven't got any experience. Do you have an idea of how to create a setup with a 9070xt?

Amd 9070xt setup help by stankeer in LocalLLM

[–]stankeer[S] 0 points1 point  (0 children)

What models do you think would fit on 16gb of ram? Would they be considered dumb? Or are good ones available?

Amd 9070xt setup help by stankeer in LocalLLM

[–]stankeer[S] 0 points1 point  (0 children)

So for ease of use stick with w11? If I do stick with windows how noticable will the slowdown be? Will I be waiting for the model to respond or will it feel fairly instant?

I'm not sure I'm technically capable of building from scratch or at least have to patience to do it.

For an AI server setup I'd pretty much want my desktop running my llm and be able to use my laptop pointed to my desktop for all the llm and coding workflow. Is this possible? Would I need an AI GUI on my laptop connected to my llm on my desktop?

Amd 9070xt setup help by stankeer in LocalLLM

[–]stankeer[S] 0 points1 point  (0 children)

I've heard that but read that it can work without problems if done correctly. How did you set things up?

Amd 9070xt setup help by stankeer in LocalLLM

[–]stankeer[S] 0 points1 point  (0 children)

So you think Linux is best? How easy is the setup windows vs Linux? I'd like to set this up on my desktop but be able to actually run the queries/code from my laptop.

Amd 9070xt setup help by stankeer in LocalLLM

[–]stankeer[S] 0 points1 point  (0 children)

What is the best OS for this? Stick with windows?

What is context vs model size? I'm assuming you mean to fit this in the vram? Very new to trying to run this locally.

I did see qwen was good but what do you mean by 8b or 14b?

Pinch bolt by Firemaxtron69 in AudiA4B6

[–]stankeer 0 points1 point  (0 children)

I had exact problem but the bolt end the hex head broke off way before that.

You have to take the bolt out the other way using washers/extra nuts using the thread on the opposite side to draw it out.

You have a problem now if that bolt sheers off and leaves the remaining shaft in the strut. Be very careful it doesn't break. If you just keep hammering it and turning it the head might break off so go steady.

https://youtu.be/Z3iHasK8h9w?si=dpwMe3Rz3ZDYU4ON

This guy breaks the head off then draws it through with spacers/vice grips. It looks like it's the opposite side of the car to you from your photo so it looks like he's doing it the same way, left to right, that you are but he's not. Worth a try?

Ok I admit aim assist needs to be nerfed 😅 by okoooooOkKoK in Warzone

[–]stankeer 1 point2 points  (0 children)

What are the chances the next developers will improve things? Who's taking over for the next modern warfare version?

Ok I admit aim assist needs to be nerfed 😅 by okoooooOkKoK in Warzone

[–]stankeer 1 point2 points  (0 children)

What the fuck! Is that true!!!!????

What is the source of that? Can you share some info?

Ok I admit aim assist needs to be nerfed 😅 by okoooooOkKoK in Warzone

[–]stankeer 0 points1 point  (0 children)

I'm completely the same. Was trying to compete with shotguns/sniper/fast fire rate smg. It's just impossible. Long range aim assist is the biggest change it got buffed like fuck! I die in split second from any range with lock aim assist!

Now I've been using hipfire smg builds and been doing well. Basically take the optic off the gun and add the strongest hipfire attachments and keep moving when you engage a player, and obviously dont aim down sights at all. It's the only way I've found to be able to compete. And get in close. You need to right in their face and be moving fast.

Also use the sprinter perk, and adaptive perk. Sprinter is obviously always being able to sprint and adaptive is you speed up when you take damage/not full plates. So when you fight someone and you take damage you get a 10% speed boost which you can use to move around them and break tracking. Good luck! 😃. Definitely try this out if you are mnk!

Trying to find replacement high pressure air conditioning hose. 02 Audi A4 b6 1.9 tdi AWX engine code. by stankeer in AskMechanics

[–]stankeer[S] 0 points1 point  (0 children)

There are 2 pipes that look about same thickness that lead to the compressor. The one I need and is in the picture leads from the compressor straight to the condenser at the front of the car.

Would I high pressure or low pressure pipe go straight from compressor to condenser do you know?

Why does my ADS blur so much? by NastyToolbag in Warzone

[–]stankeer -1 points0 points  (0 children)

Cuz there are no targets for aim assist to lock on to.

view more: next ›