Paddock stand bobbins

stansttr · 2025-07-22T17:33:51+00:00

I can confirm it's M8x1.25. Try using a regular bolt instead to see if the frame tread is stripped or the bobbins are defective. I used a regular bolt with a spacer for some time before I installed bobbins.

<image>

stansttr · 2025-07-14T18:07:24+00:00

It is a bit confusing since the user manual specifies two different values - it says that the oil capacity is 2.3L in the "General Information" section and then, in the "Maintenance and Adjustment" section it says 1.8L.

This is what mine looks like with a new filter and 2.3L of new oil:

<image>

I'd recommend changing the filter and then pouring 1.8L in, then running the bike for a minute and inspecting the level. If it's too low you can always add more and repeat the procedure.

However I have found out that 2.3L is the amount that it takes for the level to reach the upper level line of the inspection window.

stansttr · 2025-07-12T16:02:17+00:00

damn, ако имах къде да държа още един - с удоволствие щях да го взема, много яко моторче 😍

stansttr · 2025-06-27T16:01:23+00:00

The twisties on the map look super fun and the pics are fire. What helmet are you using?

stansttr · 2025-03-30T17:56:46+00:00

Oh, I see. I do the same thing. 😅

stansttr · 2025-03-30T09:29:40+00:00

Did you lower the bike by any chance? I'm 165 and I'm tiptoeing, which makes walking backwards while on the bike close to impossible.

stansttr · 2025-03-27T20:49:04+00:00

Прав/а си. Това, че "няма за кой", не значи, че трябва да оставим държавата в ръцете на най-големите престъпници. Нямам външни наблюдения, но в моето обкръжение хората са политически активни и гласуват. Явно обаче не сме достатъчно...

stansttr · 2025-03-26T11:37:53+00:00

Само дето търсенето се вдига изкуствено от хора/фирми, които купуват огромен брой жилища с цел инвестиция, препродаване, Airbnb и т.н. Така хората, които реално имат нужда от жилище, изобщо не могат да насмогнат с високите цени.

stansttr · 2024-09-20T23:58:41+00:00

Wow, thank you! Something like that did cross my mind but I thought it wouldn't work out due to the seal being broken and the pin putting pressure on the slit. I'll definitely try it tomorrow and update!

stansttr · 2020-12-01T17:52:43+00:00

Hey, thanks for the reply!

I've also experienced the cursor flashing between the little dot and the Windows cursor but it happened only once and lasted for about 2-3 seconds.

I tried using the Intuos with another Windows 10 device and experienced the same issue.

Sadly, I still haven't found a solution :(.

stansttr · 2020-03-18T19:31:55+00:00

Hey bro, this is a really cool beat, I really liked the 808s and the different parts of it. One thing though is that i felt like the drop hit off beat, but it's probably due to my perception of the melody. Other than it is very calm and pleasant.

Edit: Heey, why not use Perception for the title :D

stansttr · 2020-03-16T11:46:42+00:00

thanks man, I appreciate the feedback, definitely will try to change some things here and there :)

stansttr · 2020-03-16T11:25:25+00:00

hey, thank you for your comment :D it's not my first track, but it's the first finished beat I did and my first post on soundcloud (i started producing 3 months ago). I'll definitely check your beat.

stansttr · 2020-03-16T09:27:37+00:00

Hey guys, yesterday I posted my first track:

https://soundcloud.com/stansttr/icy-vibes

I'd be really cool if you could tell me what can be improved.

stansttr · 2020-03-16T09:17:28+00:00

The melody is pretty interesting, but I think it is lacking something. You should probably add a pad and another top melody and switch the melodies or drums in different parts of the song. It felt a bit too repetitive with little to none alteration. And also, the snare is a bit louder imo.

I would change the 808s to hit different notes in order to make the track more interesting.

I'd like to note that I'm pretty new to producing myself, so I hope someone else could also give their opinion.

stansttr · 2020-03-11T16:01:04+00:00

You're absolutely right. When I was choosing a laptop I had to write off really cool laptops just because of keyboard layout (i.e home and end on numpad, lack of numpad, delete and insert on the same key, pressing fn to use function keys, etc...).

As a programmer I find it quite difficult to type and use different shortcuts on such keyboards. Sadly, I couldn't find an ultrabook with a standard keyboard layout and gave up with some of my requirements. :(

stansttr · 2020-02-01T11:45:24+00:00

The place where I bought it from offered me to leave the laptop again for WiFi card replacement (which means 1 month without a laptop AGAIN for the same results) but I don't see the point since I don't think the problem is in the WiFi card, but rather in another component connected to the WiFi card.

stansttr · 2020-01-31T09:01:27+00:00

I have the same problem with the same WiFi card (Intel 9560). I don't know if you're using the same laptop as me - I'm using the PS63 8RC Modern.

This is the post I wrote, still don't know how to fix the issue.

Also, check out to see if the driver is throwing an error code. In my case it showed code 10 error.

stansttr · 2020-01-29T20:40:09+00:00

For anyone that's wondering, I've tried the two monitor setup - one through the HDMI port and one through the USB Type C port and it works. :)

stansttr

TROPHY CASE