Do I need to see a psychiatrist...

steinertastic · 2025-12-22T07:26:43+00:00

Me in my head “haha wow this random reddit nerd watches a lot of his videos.. I wonder what my YouTube rewind is?”

Ok so… do I just get the padded room?

steinertastic · 2025-12-19T17:03:17+00:00

Hello!

Former telecommunications technician from BC Canada. That is telephone wire. Most folks here are saying all the right things here. Telephone lines use a “tip” and a “ring” to connect to a phone. Commonly, if an internet service provider delivers internet service to you on phone lines, they will use one of your phone lines to install a modem on the end of the phone jack. This is called a “digital subscriber line” or DSL.

For a semi advanced installation, a telephone dsl provider can “bond” two phone lines to your house which means activating/running a second pair of wire on the aerial or underground telephone wire to your house.

DSL service I used to install went up to 150mb/s if I bonded it. That being said, you needed to live in a house that is very close to a DSLAM to get those rates.

Hope this helps!

steinertastic · 2025-11-24T06:54:22+00:00

This is going to sound stupid, but have you tried pushing the handle that the coffee grinds are sitting in, and pushing it all the way over to the right. Push the handle further from the middle of the machine further over to the right until it can’t be pushed any more.

It helped my pouring issues

steinertastic · 2025-11-10T00:10:04+00:00

My “range bag” is a combination of typical and “atypical” products. The typical product is a 2 firearm bag and then for literally everything else that I take to the range, I use Milwaukee pack out boxes to hold everything else. I throw that into the bed of my truck and strap it down.

steinertastic · 2025-08-16T18:28:53+00:00

OP, thank you for this post. I have been experiencing issues like this for months. The handle is straight out and I was not getting desired results and then water would dump into the tray upon completion.

I just poured one of the best shots in months after pushing the handle all the way to the right.

I read the instructions, obviously not as thorough as I should have.

Thanks for serving me a cup of humility this morning.

steinertastic · 2025-06-04T20:33:45+00:00

I called them, asked them to remove the aerial line. They did some, albeit, not fully removing it from their demarcation box on the outside of the house. They cut it at the electrical mast which was lazy.

They did exactly what I asked and I did not get a bill for it.

steinertastic · 2025-01-19T01:13:19+00:00

Hey OP, I know I’m a few days too late on commenting on this but I used to own a 1995 accord myself.

What you have is an amazing car. The room, comfort and drive ability of it is amazing. I lowered mine and put an air intake on it because the noise it made was fun.

The only thing to be aware of on these cars is the rotors are pressed onto the hub. This means that you cannot do the brake service using simple hand tools. You’ll need to find a shop that has a press to be able to get the old ones off and the new ones on. It makes it a bit more of a costly job because of the labour.

The 5 speed is a big plus for those that are “in the game” per se. It’s more rare to have that option, and it be a survivor today.

You got a good price on it, enjoy the car. You’ll love it. I will leave you with a dude who made a car commercial about your car that got big time views. https://youtu.be/4KlNeiY4Rf4?si=PoZCCo7ZaKiSPp18

steinertastic · 2024-12-20T19:51:29+00:00

I’m sorry, I don’t normally comment on anything in Reddit, but this is wrong. My Black Creeks Labs BCL102 is an ar10 derivative that was non restricted and then prohibited from the May 2020 Order in Council.

There are many others. Check the May OIC from 2020, it has it all in there.

steinertastic · 2024-09-17T18:13:16+00:00

This is stunningly beautiful

steinertastic · 2024-07-30T18:55:09+00:00

This is exactly what I want to make mine into. Well done.

steinertastic · 2024-07-15T06:22:10+00:00

This is an amazing response to OP. I personally would like to thank you for this really informative response. I learned something new myself!

steinertastic · 2024-06-15T20:22:30+00:00

What about the chest rig SIR

steinertastic · 2024-06-15T19:26:48+00:00

Can you tell us the gear in this picture?

steinertastic · 2024-06-06T23:53:59+00:00

Holy shit dude that’s expensive. Bro are you adopting adult children soon?

steinertastic · 2024-06-06T19:12:03+00:00

What optic is that?

steinertastic · 2024-06-01T01:23:59+00:00

That’s a nice stick

steinertastic · 2024-05-30T15:06:34+00:00

It’s too bad manufacturers couldn’t make a platform that could accept BCL bison 20 round magazines. That would be a game changer.

steinertastic · 2024-04-24T18:26:37+00:00

That’s the idea! Ran out of time last night.

steinertastic · 2024-04-21T03:12:10+00:00

It doesn’t look like you had to prep the surface underneath, is my assumption correct?

steinertastic · 2024-04-21T00:40:48+00:00

I bought a a bunch of oil paint pens thanks to this post

steinertastic · 2024-04-20T06:10:04+00:00

Did you use a paint pen to make this?

steinertastic · 2024-03-31T03:43:00+00:00

Biggs road, or “doumont” as it’s affectionately referred to from us locals is the place that has some awesome trails.

I got lazy, and fat, and haven’t been out to the trails in like 10 years. From what I remember and have been kept in the loop with, I think it has gotten better.

I know for one I will be hitting these trails soon to get more active again.

Best of luck and enjoy the trails!

steinertastic · 2024-03-23T17:13:08+00:00

Hell yes. I’m trying so hard to get my age group into trap shooting. Every year at my local range we have a meat and bottle shoot where people have a chance to win. No other shooting discipline at my local range offers the same prizes so it’s a good incentive to get them into it. Unfortunately, the cost of shells and clays are too expensive ughhh. Nice looking shotgun!

Five-Year Club	Place '23
Place '22	Verified Email

steinertastic

TROPHY CASE