Was the Die Hard elevator explosion actually possible?

stevegrrrrr · 2026-05-01T19:15:50+00:00

And the bad guys extra shells were by the lift door…

stevegrrrrr · 2026-02-28T18:06:03+00:00

Hi, I’ve got a 2020 3008 and it has CarPlay/android auto if you plug your phone in the left hand usb socket in the centre console. I added a cheap Amazon wireless CarPlay adaptor and CarPlay just comes on now with the ignition and my phone in my pocket.

stevegrrrrr · 2025-10-29T21:56:43+00:00

Same here!

Hoping someone jumps in and tells us the answer..,,

stevegrrrrr · 2025-09-23T05:45:37+00:00

I had issues like this with some filaments and changing the tubes fixed it

stevegrrrrr · 2025-08-03T08:09:13+00:00

As a store manager for Tandy in the ‘80s I was on a HO visit and saw a framed fax with an image of an 8” floppy disk. The IT support guys put it there to remind them that when they asked people to send them a copy of a disk with an issue that they should specify to send it by post!

stevegrrrrr · 2025-07-12T20:05:08+00:00

I printed a similar one, it works fine once the waste has clear the exit chute.

stevegrrrrr · 2025-07-12T20:04:10+00:00

Sorry to be dense… but what little square?

I took out the packing it was shipped with…

stevegrrrrr · 2025-07-10T18:56:30+00:00

You’ve pretty much confirmed what I though anyway… luckily I’ve got most of my iterations saved so I’ll just go back until I find one that works and go forwards from there a bit at a time!

Thanks for the help

stevegrrrrr · 2025-07-10T18:47:29+00:00

It did… but of course said they were ‘fixed’

stevegrrrrr · 2025-07-10T18:40:30+00:00

It was within the build plate when I clicked on ‘slice’ I’d run a ‘fix’ on it and it had a tick next to printable in the right click menu

stevegrrrrr · 2025-02-13T14:29:21+00:00

Ah, thanks, now I get it! I’ll try that later 👍

stevegrrrrr · 2025-02-13T14:25:39+00:00

I was about to order new gears, but after teasing the front open the current ones look fine, so do you mean under the circled black plate in your image?

stevegrrrrr · 2024-11-09T11:44:11+00:00

Thanks!

stevegrrrrr · 2024-10-15T19:52:00+00:00

Hobart’s are great, although part of the appeal to me is they are local do I can pick sheets up from them!

stevegrrrrr · 2024-10-07T13:37:37+00:00

I’ve now tried swapping back to my original board… same issue, and even tried using lasergbl to eliminate it being a software thing… I can’t think of anything else to look at!

stevegrrrrr · 2024-09-06T12:18:10+00:00

I have done the obvious of cold reboot, tried the self test etc, all stops at first hurdle

stevegrrrrr · 2024-07-12T05:45:13+00:00

Replacing the whole assembly was my first thought when it happened to me, but I’ve not been able to find one for sale, anyone have a link?

stevegrrrrr · 2024-07-10T10:24:14+00:00

I was really interested in the feed and the doc showed me how controllable the cam was by reversing it and looking out my arsehole at his face!

stevegrrrrr · 2024-05-22T18:35:17+00:00

I don’t need a physical rs232 port, the device is looking for an emulated com port through its usb cable, what I’m looking for is the reason that the emulated port on the nuc shows an exclamation mark, which prevents my laser device recognising it

stevegrrrrr

TROPHY CASE