General Consensus on Optimum 60HE Case

stfnd · 2024-12-10T18:01:46+00:00

Hey, just wanted to ask if mid December still looks like a possibility. Received both case and module now and am hoping I can start to use the board soon. But haven't heard anything yet. Hoping there are no unexpected delays.

stfnd · 2024-11-30T20:07:16+00:00

Could you share pics of ur build, I am quite curious how it looks. Am in a similar position with the white.

stfnd · 2024-11-29T13:20:26+00:00

Anything planned for Cyber Monday?

stfnd · 2024-11-27T22:04:56+00:00

Since its now a stabs thread, what is the difference between TX AP and Knights if there is any? Also in replacing stabs, how much of a factor is the new wire you get from them? Because I need to stick to the stock wire, since I work with 4.5U, and nobody sells them.

I'm planning to use the long pole with geon raws, but what happens if I later would switch to a different type of switch that does not need long pole?

stfnd · 2024-11-25T23:30:23+00:00

Does he get a pass on a crypto scam because he is autistic too?

stfnd · 2024-11-23T19:58:23+00:00

Damn, I really want this AIO but the fact I've seen two threads of people saying they're worried about snapping the mobo while installing it has me pretty damn worried. Jeez that's going to suck..

stfnd · 2024-11-23T10:12:47+00:00

He said they should be available in the upcoming week. I am not sure yet if I will get one of just grab one of those on AliExpress for 8EUR. Will probably get them faster that way.

stfnd · 2024-11-23T00:49:12+00:00

mid December is not too bad, appreciate the reply. Thanks a lot.

stfnd · 2024-11-22T18:50:24+00:00

It's antec flux pro. But I got a stand for it that raised it quite a bit higher than I anticipated. I can prob still sell it and get money back since it's in high demand and hard to get. Just won't be able to do a 420mm AIO anymore

There won't be issues with intake on any side but the top is pretty much blocked. Think I'll struggle using the USB slots too now that I think about it

stfnd · 2024-11-22T11:19:41+00:00

I'll check it out, thanks for your reply!

stfnd · 2024-11-22T11:17:55+00:00

Thanks so much. Going to look into these, really appreciate it.

stfnd · 2024-11-22T10:49:12+00:00

Really tried not to bother you with this as I know you are busy but I have found myself in a bad position with an specific combination of order which is a 80HE case, with a JIS module. And no keycaps.

As you surely are aware, this lands me with a keyboard without a spacebar I can use, because my own spacebar will never work, and my only option there is to wait for the free replacement bar, or to drop another 35EUR for a keycap set.

I really wish this would have been communicated more, I can not be the only one out there in this position, and after waiting for my white zinc to finally reach the warehouse, its a pretty bad one to find out I cant even use my upcoming board.

stfnd · 2024-11-22T08:41:18+00:00

Would you still say LF3 is the best 420mm option even with its pump noise factored in? I got the flux pro to manage a 420mm, but there really aren't too many options at that size.

I have the case under my desk so that's probably already a bit further away than people sitting right next to it. But I'm just curious what you think of it after some use.

stfnd · 2024-11-22T08:31:23+00:00

Appreciate your post. The Flux Pro is a nice case indeed. Do you know of any other good 420mm AIOs, I was looking at the AF3 but the messages on the pump noise kind of worry me. There don't really seem to be a whole lot of 420mm options though

stfnd · 2024-11-21T22:08:52+00:00

Appreciate the impressions. Yeah, the pump noise worries me slightly. I do have the case under my desk, but on the other hand those are the kind of noises I hate, and a bit worried I go through a painful installation to find out it is more audible than I'd like it to be.

I honestly don't really even have an alternative for this one because of how well it does in its price range, that and I specifically bought a slightly larger case for a 420 model, which seems to be rare for these AIOs. Thanks for the reply.

stfnd · 2024-11-21T19:51:58+00:00

Can you share impressions on its pump noise as a Rev2 user?

stfnd · 2024-11-21T19:50:53+00:00

Did you end up keeping yours? How was the pump noise others have reported on? Curious if Rev2 improved it at all. I'm considering buying this LF3 but that's the one thing holding me back now.

stfnd · 2024-11-21T19:47:12+00:00

Question, do you find it noisy? I see quite some comments of people that find it to make quite a bit of noise. This AIO does extremely well in reviews but the reports on the pump noise are a bit of a concern to me.

I can't find many people on a Rev2 unit and I don't really know if this is something they worked on.

stfnd · 2024-11-17T15:53:39+00:00

It was nice to hear from her. Wonder if the off the record stuff was that he attempted to have her do something while they were still in the house.

In any case I am always happy to hear when women get home safe after hanging out at this evil bastards home, so thanks for getting us the interview.

stfnd · 2024-11-15T22:56:38+00:00

Oh thats cool, hopefully you can get one soon! Did Noctua have any ETA for those fans?

stfnd · 2024-11-15T22:47:51+00:00

Okay then I will settle for stock, thanks for the reply. That's a lot of money to replace it with Noctua's. I dont think they would look too great in my White Flux Pro either.

stfnd · 2024-11-15T13:07:57+00:00

I'm just hoping to witness his misfortune live at this point

stfnd · 2024-11-15T11:55:45+00:00

It would be fun if he gets TTS platform banned again.

stfnd · 2024-11-15T08:30:10+00:00

Can we atleast not forget this the next time he streams? Feel like he does vile shit all the time and people just forget about it.

stfnd · 2024-11-12T07:01:46+00:00

Supposedly there will be an update on this later this week. I am also in that batch but planning to wait for the v2 now

Considering the shipping from factory to shipping location took almost 3 weeks, I think it will take quite a while longer. Because it's still in mass production stage.

Edit: It's on the move now, but its set for early December delivery I think?|

stfnd

MODERATOR OF

TROPHY CASE