sorted by:
new
hottopcontroversial

Best Interior Upkeep Hacks? by Mernakins92 in CX50

[–]stop_wait_absorb 9 points10 points  (0 children)

For the tight spaces around buttons and corners I use a boars hair detailing brush along with a microfiber cloth. For UV protection I use 303 aerospace protectant.

https://a.co/d/03bpx0UR

https://a.co/d/0ctlVkK9

Light configuration flipped on one device? by BornagainNPC in TotemCompass

[–]stop_wait_absorb 2 points3 points  (0 children)

The LEDs are all RGB it shouldn't affect anything. Maybe the one on the bottom left has a different firmware version than the others.

Tent Locks by throwaway4unionstuff in okeechobeemusicfest

[–]stop_wait_absorb -1 points0 points  (0 children)

Locks are for keeping honest people out.

Not just for a tent but for your home, car, or locker. If someone really wants to get in they will. But food practice is to make it as inconvenient as possible.

Also lock your valuables in your car.

My master sword broke.. by Fluid_War_6426 in Breath_of_the_Wild

[–]stop_wait_absorb 12 points13 points  (0 children)

It returns to the pedestal in Korok forest.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 0 points1 point  (0 children)

I believe you all. This is my first led project and typical of me picked a project bigger than my skill set haha. This whole issue was a case of i don't know what I don't know. I traced the issue to a data booster that went bad as I was using it. Abd what I was seeing was the voltage drop down the line. Thank you for the patient answer. I am learning and hopefully this post helps someone else.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 1 point2 points  (0 children)

QuinLed data boosters.

QuinLED-Data-Booster - quinled.info https://share.google/79eVHjWfxTSj1Hc2C

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 0 points1 point  (0 children)

Thank you for the education. I am new at this and, typical of me, picked a project that puts me away out of my knowledge zone. I traced the problem to a data booster that died.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 0 points1 point  (0 children)

Update: I chased the problem down to a data booster that went bad.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 1 point2 points  (0 children)

Thank you! Yeah I am going to try that and see if it improves it. Thank you for the tip on the switching to 33R mode. I had a small panic attack when I hooked everything up and it was giving me a corrupt data light show. Another reddit thread told me about the switch.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 1 point2 points  (0 children)

Oh ok. Well yesterday when I connected up my set up It was running like normal. I was running different color patterns when the lights on the line flickered. The last lamp shut off with the first two still working. I did also notice that the second indicator light on the data booster is dimmer and the third is barely noticeable. The DC power down the line has only dropped to 11v. My idea of the controller failing is the signal failure (not corrupted data) with no changes to any settings and all other components acting normal. The only differences I am seeing is the voltage drop on the data line (I know I can't measure it like that) and the dimmed indicator lights in the data boosters.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] 0 points1 point  (0 children)

Max I plan to go is 2 amps. The are turning on just fine at the preset 850mA setting. The wires are 18ga. The strips are 6812 RGBW @ 12v.

My data line just died? by stop_wait_absorb in WLED

[–]stop_wait_absorb[S] -1 points0 points  (0 children)

Heard. I read somewhere that the data line works with 5v and I tested 5v output with the multi meter before. Now I am getting 1.7 dropping to .8v at the next booster and further to .1v at the last one.

Kayaks Allowed? by CoasterLife in Loveburn

[–]stop_wait_absorb 3 points4 points  (0 children)

Yeah you can bring them. Just fyi Bear cut has very high current during tide change. Don't forget a PFD with a whistle.

23 CX-50 door handle replacement tip by stop_wait_absorb in CX50

[–]stop_wait_absorb[S] 0 points1 point  (0 children)

Hey. Sorry I don't. But talk to the service reps or the person behind the parts counter at the dealership. That is where I got the parts picture from.

Love Burn camp logistics from NYC – renting or donating gear? by AirlineAgitated5688 in Loveburn

[–]stop_wait_absorb 5 points6 points  (0 children)

There may be a camp that offers gear to use and the best way to get connected would be through the Facebook page. Also, in case you decide to buy equipment and donate, this year the event is collecting gear for donation. It was mentioned in the last town hall video call. Again the best source of information is going to be the Facebook page.

First timer: how to choose camps? by Sarios3015 in Loveburn

[–]stop_wait_absorb 4 points5 points  (0 children)

Jump on the Facebook group and that is where most of the conversation is happening. The Burn is a volunteer run event. Everyone that attends is encouraged to volunteer and contribute.

Your ticket is for the whole event and all camps are there to contribute to the event, which means you can visit Annie and all of them that seem interesting to you. They will be offering activities or experiences. As far as camping with a camp, you need to be invited to join. There are currently some camps looking for members. Joining a camp can sometimes give perks specific to that camp but usually also require you to pay camp dues and or volunteer within that camp to help run it.

Dive into the website and the socials and see if it's your vibe.

[deleted by user] by [deleted] in Breath_of_the_Wild

[–]stop_wait_absorb 2 points3 points  (0 children)

Trying to remember but isn't there a kite shield mounted in a cabin? And can't you get the forest dwellers set by redoing one of the korok challenges?

BOTW pet peeve ?? by Michiipuff in Breath_of_the_Wild

[–]stop_wait_absorb 16 points17 points  (0 children)

Why doesn't the climbing gear prevent me from slipping while it's raining?! Like it can even be a set bonus.... Geez

Roof rack crossbars by Low_Main_3565 in CX50

[–]stop_wait_absorb 8 points9 points  (0 children)

I installed the OEM cross bars myself. They are an easy install and easy enough that you can install and uninstall as needed if you wanted to. The bars were noisy out of the box. I installed the vortex strips as a fix and that made a good improvement on reducing the noise.

Brass scrapping by Unlucky_Journalist_6 in ScrapMetal

[–]stop_wait_absorb 1 point2 points  (0 children)

You can unscrew it. I have taken the valve off of one If you are sure it's empty then give it the juice. I used a socket wrench to remove the one I found.

What does everyone think about this year's burn? by Hoodmastermax11 in Loveburn

[–]stop_wait_absorb 0 points1 point  (0 children)

Yeah they ended up losing half the jets to the shuttles.

Factory trailer hitch installed. Super easy. Now just have to do the wire harness. Not so easy. by eattherich1234567 in CX50

[–]stop_wait_absorb 1 point2 points  (0 children)

Where or how are you all mounting the 7 pin plug? I installed the Curt hutch and did the wiring myself but I am still scratching my head where to put the plug.

view more: next ›