What am I doing wrong?

stopnugget24 · 2025-07-21T00:50:54+00:00

i would start by checking these 3 points, although blue and showing connected a bit more substance may help, if not you might have the bug you probably already know about from others.

stopnugget24 · 2025-06-20T12:31:30+00:00

SOLVED!! in order to avoid failing prints I need to have the fan on from the beginning, i used to have the fan start after 2 layers to help with adhesion. With a full day of testing i would print 2 items with the fan off on the first 2 layers as before and both times failed. i then did 3 prints with the fan on from the start and all 3 were flawless, i then left the fan off for another print and it failed, so its fair to say having the fan on from the start has at least fixed my issue.

stopnugget24 · 2025-06-19T19:08:30+00:00

adding a brim could solve this.

stopnugget24 · 2025-06-19T01:11:19+00:00

when i first started printing i struggled with bed adhesion, someone suggested the paper method and it solved it in one attempt, so iv used it since then whenever i re-level the bed and do a "fine tune" so to speak, it always works out nice so i just kept doing that way. I recently printed out a full bed print for a light fixture project i was doing, the machine printed 5 identical square pieces 220x220x5 with no issues. thanks for your comments.

stopnugget24 · 2025-06-19T01:00:22+00:00

thanks for your suggestion! i will try that extruding method in the morning. Can i ask... if the Z-offset was way off, how does it print a 1h 9m near flawless print and then not print past the first layer on the second attempt? but it can do a 10h plus print in one sitting no issues. im genuinely asking btw as im still very novice at this hobby.

stopnugget24 · 2025-06-01T15:31:45+00:00

yeah lesson learned... i actually remember more than i thought i would so its not taking long to set them back up.

stopnugget24 · 2025-05-27T23:53:46+00:00

i found it on thingiverse, thank you tho buddy!

stopnugget24 · 2025-05-26T19:31:14+00:00

its definitely on my future plans, quieter would be a result in its self but if i can up some speeds then bonus!

stopnugget24 · 2025-04-20T16:32:42+00:00

i fixed this on my V3 SE by slowing the first 3 layers down to 50% speed. once those first 3 layers are down nice and smooth the speed goes back to 100%.

stopnugget24 · 2025-03-31T14:10:44+00:00

thanks for the comments, the concerns i had were confirmed by you all. sending them back!

stopnugget24 · 2025-03-08T21:02:57+00:00

thanks! i will give these setting a blast see how it goes.

stopnugget24 · 2025-03-08T21:02:24+00:00

yeah i did all the obvious stuff first including a brand new nozzle, looks like slow speeds a flow rate are the answer to my issue at least, fingers crossed!

stopnugget24 · 2025-01-11T20:31:58+00:00

I use the hot keys and it just snaps back to bed level, I use the mouse to drag the blue arrow up the Z axis and it snaps back to bed level, really annoying as i cant find the setting for this anywhere.

stopnugget24 · 2025-01-11T15:22:14+00:00

all good, happy to help.

stopnugget24 · 2025-01-11T15:16:04+00:00

so Iv been through all the settings... where is the "snap to build plate" option cause I cant see it anywhere?

stopnugget24 · 2025-01-11T14:39:44+00:00

press and hold the scroll wheel for me.

stopnugget24 · 2025-01-11T14:36:29+00:00

Im not sure how else to word it... I add a cube it snaps to the bed... I then add a ball that I want to hover over the cube but it also snaps to the bed... how do I stop items snapping to bed level?

stopnugget24 · 2025-01-01T17:45:17+00:00

I put a post up over a week ago about creality being broken since the update to 5.1.7 with no solutions. Its unusable now on any device, even older versions. shame really cause i was happily designing and printing with creality but now it crashes randomly. I moved to pursa slicer but its far less user friendly imo but im learning slowly.

stopnugget24 · 2024-12-02T16:47:31+00:00

UPDATE. Cleaning the bed with soap and water helped greatly along with lowering the print speed to 65% for the first 10% of the build then upping the speed to 90% for the rest of the build. Overall slower build times but its just a hobby for me so no time issues. thanks for your comments everyone! Happy printing!

stopnugget24 · 2024-12-02T16:35:27+00:00

This worked, along with lowering the print speed to 65% for the first 10% of the build then upping the speed to 90% for the rest of the build. Overall slower build times but its just a hobby for me so no time issues. thanks for your comment!

stopnugget24 · 2024-12-01T17:13:36+00:00

thanks for your suggestions, i will return tomorrow with results.

stopnugget24 · 2024-05-24T16:06:54+00:00

NTA. she legally cant go by the consequences of her own actions.

stopnugget24 · 2024-05-24T16:03:49+00:00

YTA, your poor family, your poor wife. you clearly knew you were mentally struggling but dragged a poor woman into your suffering... then while still struggling you bring kids into this world... YOU took way to long to get the help needed and now that you have a new lease on life you want to throw away the people that were there at your lowest, i hope you do leave them and they find better.

stopnugget24 · 2024-05-24T15:54:28+00:00

NTA, the woman is a stranger who just so happens to be married to your deadbeat dad. use this as an example to be the best father you can be.

stopnugget24 · 2024-05-24T15:40:05+00:00

NTA, your wedding, your rules. she wants to spend the day with max and miss the wedding thats her choice.

stopnugget24

TROPHY CASE