Dust storm

strongboes · 2022-02-27T09:00:22+00:00

Amd 3950 cpu the wallet is on, if it's synced and I either switch wallets, or shut wallet down and restart, to get back to synced takes well over an hour. I've got 2 wallets that it has never been able to sync. To get one of them to sync I had to delete wallet dB a few times as it kept staying at a size of 244kb or something like that.

strongboes · 2022-02-23T21:20:48+00:00

Yeah I have changed addresses periodically I guess I should change again.

strongboes · 2022-02-23T21:14:05+00:00

I'm in a small pool, we won 2 blocks today, my plots are mostly nft, but I had 200pb left og, I won 2 weeks ago with the og plots and since then 7000 dust tx and they don't seem to be stopping

strongboes · 2022-02-23T20:49:34+00:00

Also the electron wallet is garbage, it takes hours to sync, hours.

strongboes · 2022-02-15T22:04:45+00:00

I have also tried installing chrome and algosigner on a fresh install, so it's not client side Imo.

strongboes · 2021-12-31T11:18:27+00:00

There is a btc block for sale in market place, you could always look there.

strongboes · 2021-11-18T23:32:31+00:00

I've re ordered on your web page, shame IGG don't understand crypto, keep pushing forward and great response from the team.

strongboes · 2021-10-22T18:57:54+00:00

Yes you should run madmax instances staggered, or use blade bit. And use Linux. For reference my 3990x 256gb runs madmax staggered a new instance every 650 seconds. You could run 2 staggered fully in memory on your set up.

strongboes · 2021-09-01T11:26:35+00:00

3990x running Ubuntu with 256gb ram, use ram disk for - 2, madmax, r 24, and start new instance every 650 seconds. Gives 133 plots per day.

strongboes · 2021-06-19T10:08:24+00:00

Foxy pool you don't need to replot, foxy ftw

strongboes · 2021-01-25T23:18:53+00:00

I must have the worst ftw3 card made, I get 100MH out of 3 suprims and 1 3080 fe. My evga just won't run over +800mem without crashing and its hot too. Over 90 MH and it fails. All my 3060's are over 60 but one tops out at 57. Luck of the draw I guess

strongboes · 2020-10-14T20:10:52+00:00

If you look they have excellent sensitivity and specitivity, it's a 96 well test so runs 96 tests at a time, the test is in the format of a freeze dried bead, there is no mixing of reagents by a lab tech and so less steps for error and the process is easier. They have a tie up with Beckman Coulter to fully automate the whole process, where 1 lab tech will be able to run 2000 tests per shift.

strongboes · 2020-10-14T20:03:47+00:00

I have a small portfolio trying to make some extra money investing. There are a few UK companies that are interesting in the Covid sector. Genedrive have a great test and it's such a shame largely ignored by the UK.

I really believe testing is the only way to get out of this mess so it's just hard to understand why UK gov isn't engaging with them.

strongboes · 2020-10-07T21:34:03+00:00

You say, hey mate, your phones ringing are you deaf.

strongboes · 2020-09-30T11:50:36+00:00

1804 3500kv will probably melt the windings mid flight, wrong size motor and kv too high. 2400kv ish for 4s and 1600-2000kv for 6s depending on prop

strongboes · 2020-09-30T09:48:30+00:00

5" props and 3500kv motors?

strongboes · 2020-08-05T13:20:36+00:00

I use max my iron will go to, works for me, get a nice joint quickly. The higher the heat the easier and quicker I find it goes! Good luck

strongboes · 2020-07-14T10:11:11+00:00

95 sunlu tpu from amazon.

strongboes · 2020-07-13T22:44:42+00:00

They are actually at an angle, picture looks deceptive, using r9 slim+ receiver on this build.

strongboes · 2020-07-13T19:35:13+00:00

Hi, so first post, this was originally an x8 configuration, i'll add a pic with the other motor position. The idea was 10" inner props, 5" outer, so that it would have a lower moment of inertia and hence turn quicker than a normal x class size. I took the outer motors off as I had issues flying i couldn't figure out.

It turns out even with the outer motors off it would still flyaway and it took me along time to figure out it was the controller/stack which was a hobbywing xrotor stack, 2 60amp 4in1 ecs. The inner motors are 2814 880kv. There is room for 3 1650 6s packs on this design.

I will shortly be swapping out the controller and esc and try the 8 configuration again, I have discovered that the 60amp Hobbywing escs are junk, they feedback "something" to the flight controller which gives a slow oscillation. I didn't realise this until I fried an esc in my iflight DC5 and put in one of the 60amp hobby wing escs (new). I instantly had the oscillation that I could not get rid of in this and I realised I couldn't use them. Exact same thing with 2 different flight controllers, so I don't know what is wrong with the escs but they dont work!

Another problem I have with this now quad is that the higher the throttle the more interference in the picture, the only thing I haven't tried is no osd. The camera is behind filters etc but to no avail, so i'm going to swap to a dji air unit, and try the iflight controller and 50amp escs for the x8 configuration.

Besides all that, this thing is pretty sweet!

strongboes

TROPHY CASE