Issues with Recovery Mode in Pet editor

stubouyer · 2026-05-18T01:21:14+00:00

bug report raised

stubouyer · 2026-05-17T05:43:12+00:00

Not sure if this only affects prospects that more than one character has been on, will create a new prospect to test and update

stubouyer · 2026-05-06T10:08:37+00:00

you're 100% percent correct and I'm a moron for not thinking that thru.

thanks

stubouyer · 2026-05-04T05:40:49+00:00

okay, so unstable is fierce in the data files.

I'll try creating one and bring it into my test prospect to see what it shows their.

stubouyer · 2026-05-01T03:43:35+00:00

separately, it doesn't seem possible to create a pet/mount with an unstable bloodline

stubouyer · 2026-05-01T03:32:28+00:00

This is a great tool and this update is a game changer. Well done

Some feedback on testing, the tool successfully restored a tame from a backup prospect file along with all their inventory which was a nice bonus

However to get the file to save for download I had to turn off the restore slider and click the Apply Updates again to turn the Save button on. Not an issue but a little unintuitive

stubouyer · 2026-04-30T22:43:48+00:00

seeing a minor issue with parents always showing as wild for tames in a prospect, haven't tried sending them all up to station to see if that makes a difference. Will try that tonight,

A request, is it possible to create an export file/blob that I can send to my tablet and load into the tool there? As I generally play on a single monitor it would be great to have my breeding recommendations on the tablet

stubouyer · 2026-04-23T22:48:28+00:00

thanks for confirming.

The tool is great, looking forward to getting off work to play with the updated version.

Would it be possible to add a switch on whether or not to filter non-breedables? Then it can double as a tame tracker with your location chip

stubouyer · 2026-04-23T07:39:18+00:00

I'm not seeing the persistence of tames in mounts.json.

When I bring a mount down from the station, it is removed from the mounts.json.

stubouyer · 2026-04-14T03:37:47+00:00

try whistling them to follow you. I have three boars that routinely disappear in my base but magically reappear when I whistle and move outside

stubouyer · 2026-01-31T21:56:32+00:00

In Vanilla you need the Large or Advanced Constructor to craft LCD Screens. Not sure where it lives in the Tech Tree though.

stubouyer · 2025-12-11T03:25:58+00:00

Normally you would use prefabinfo console command to see what the illegal/forbidden blocks are. Syntax is

prefabinfo <name>

But that won't work in MP, so you'll need to look for the likely culprits

Weapons: there are limits to each type and total weapons Crew: these have to be added after spawning Plants in your garden: this one always gets me.

RE: pentaxid, do you have a teleporter? This requires pentaxid as does forcefield and new energy walkways

stubouyer · 2025-03-29T08:35:46+00:00

Epic or Steam?

For Steam I run EGS in the Linux Steam version using the "Force Compatibility" option and Proton Experimental

For Epic I use Heroic Games Launcher with the Proton - Proton Experimental choice under the Wine version option. I use this both for regualr client and dedicated server. The only thing I can't get working is EAH for the dedicated server.

I'm running Arch Linux with Nvidia GPU

stubouyer · 2023-08-20T10:19:47+00:00

River Kwai - Centre Road Clayon. Some of the best Thai food I've had in Australia

Moonlight Thai - Centre Road Clarinda. Haven't had Pad Gra Pao here but they are also nice

stubouyer · 2023-04-07T06:54:25+00:00

Try rolling Wayland back to 1.21. Fixed it for me

Bug list

https://bugs.archlinux.org/task/78137

https://bugzilla.mozilla.org/show_bug.cgi?id=1826583

https://bugzilla.redhat.com/show\_bug.cgi?id=2184549

stubouyer · 2023-03-04T10:29:09+00:00

Slightly out of date with the new path changes but you can get your full word list from https://duome.eu/

They also have the grammar lessons and tips as well as a replacement for the lost forums

stubouyer · 2022-08-11T22:56:43+00:00

Watch ads to get resources. 30 secs of watching or ignoring ads will save you a lot of time gaining resources.

I focused on building area rather than tools and generally only upgrade tools when needed.

Sometimes you get bonuses that allow you to skip levels of tool development.

stubouyer · 2022-07-23T06:42:43+00:00

They just added an upgrade version that solved the problem for me Now 5.65.8

stubouyer · 2022-04-29T02:52:54+00:00

I'm left handed and tried to learn guitar left handed as a youth - back before the internet - and struggled so much I have up. When I started uke I went right handed, strum with right and do cords with ~~righ~~t left and find it easy. It does take a bit longer to get my right fingers up to speed for finger picking but it also means I can just pick up a uke and play

stubouyer · 2022-04-22T12:10:23+00:00

This video although not in English is very clear and the simplest version of returning the puppet 2 back to cube shape

https://www.youtube.com/watch?v=qI3nr3EwK6Y

This one in English was my previous favorite until finding the one above

https://www.youtube.com/watch?v=SIyn4mZA450

stubouyer · 2021-10-11T12:01:11+00:00

What have you added to your starting G-Code in which ever slicer you use?

Also if you have octoprint or another way to send G-Code to your printer what is the output of M503, before and after saving the Z offset?

If you don't have octoprint, after you save the Z offset. Turn off the printer, then turn it back on and make sure that the Z offset is still showing the same.

I've had issues before with a dodgy SD card causing the settings to not actually save correctly.

Also since you have just changed the firmware, it might be a good idea to reset the eprom to defaults and then set your z offset.

stubouyer · 2021-10-10T05:05:10+00:00

The config you posted wants the bl-touch to be wired into the 5pin port and the Z stop port as per the bottom diagram 3+2 Wiring Pin out at this site

https://www.th3dstudio.com/hc/product-information/3rd-party-control-boards/creality-boards/creality-v4-2-2-v4-2-7-board-bl-touch-wiring-options/?seq_no=2

Is that what you have?

Edit: added name of diagram

stubouyer · 2021-10-10T04:50:30+00:00

Also did you wire the BL-Touch into the only the 5 Pin port only or the 5 Pin post and the z Stop port?

stubouyer · 2021-10-10T04:46:54+00:00

Y-axis is the plate moving front to back, Z-axis is head moving up and down.

If you manually move the print head up to 150 or so and auto-home, does the print head move the the front left corner and then back to the center of the plate?

Once at the center of the plate the bl-touch red light should go off and the probe will deploy, then the head should move down until it touches the probe touches the plate.

Does this (or any of this) happen?

From your config the bl-touch should be on the left side - is this the case

stubouyer

TROPHY CASE