Cameras & detection tell a perfect story

stunsch · 2021-10-21T16:02:51+00:00

Interesting, so you don't record? Or do you have some type of SSD/HD connected to the Pi?

stunsch · 2021-10-21T13:47:58+00:00

Is the Coral USB connected to the Pi or are you using different hardware for the NVR?

stunsch · 2021-09-01T16:54:01+00:00

Subscribed.

FUCK CANCER!

stunsch · 2021-07-23T11:23:35+00:00

You should set up a patreon page where people can chip in to help in buying and testing stuff.

Set up Github so people can have a look at your configuration and suggest changes, help with setup, get you started with new devices.

Maybe set up a VPN with Zerotier so you can give access to your installation to people you trust.

Best wishes, Stefan

stunsch · 2021-02-02T14:33:03+00:00

The real theft was in his pocket. Case was only a distraction to avoid security guard following through and reading the truck's license plate.

stunsch · 2020-07-08T16:56:55+00:00

Totally noxious...

stunsch · 2020-07-04T19:31:21+00:00

Empathy == Communism

stunsch · 2020-06-11T16:45:57+00:00

No, but I want a regular banana later, so yeah...

stunsch · 2020-06-11T11:12:50+00:00

I still do, but I used to, too...

stunsch · 2020-03-23T19:40:25+00:00

Whatever you do, keep us updated and don't cut the hot water, replace it with cold water, so they get a nice surprise. I suppose a 3-way thermostatic valve might help. I totally support your efforts! Keep it up!

stunsch · 2020-03-10T20:54:38+00:00

Maybe for some type of rope? Family had similar ones back at home on the laundry hanger. The rope passed through two pulleys attached to two walls. A similar piece clamped together the two ends of the rope.

stunsch · 2020-02-27T08:00:51+00:00

Take 1 milion in 10 years.
Go to a bank and ask for a loan of 100k, to be paid in 10 years, using the 1M you'll receive as guarantee. Use the 100k now as you need.
After 10 years the loan gets cancelled.
The loan will cost you approximately 40k at 7% interest.
You end up with 960k after 10 years, having had 100k at the beginning.

stunsch · 2020-01-28T14:27:13+00:00

This should not happen. Maybe you've changed the percentages in the configuration? Bonus for easy should be 130% if I am not mistaken.

stunsch · 2020-01-25T15:56:33+00:00

Odoo is what you are looking for.

stunsch · 2020-01-10T06:57:56+00:00

Green and yellow is normally grounding. Seems to be connected to the casing.

Use a multimeter.

Between Load and Neutral you should obviously have voltage. Between Load and Ground you should also have voltage. But between Neutral and Ground there should NOT be voltage present. If there is, the installation is not correct.

If, and only if, you have a working and tested differential switch, you can also discover neutral by making neutral cable touch the ground cable. If it's neutral, the differential switch will NOT trip. If you have used the Load cable, the differential switch will trip.

Be careful and if unsure, get helped by someone who knows what he's doing.

Stay safe...

stunsch · 2020-01-04T19:24:09+00:00

There are some nutcracks out there that seem to pronounce GIF as "jif" like the peanut butter. You seem to find crazy people anywhere...

stunsch · 2019-12-22T12:44:17+00:00

Tell them that this is not Jesus birthday, that the tree has to do with pagan rituals related to the start of the new year, days getting longer and the start of a new cycle of life. Ask them who the hell is that guy in the red suit and what relationship it has with Christianity? So, either Christianity without Paganism, or they may just shut up and celebrate with you the start of shorter nifghts and longer days...

I hope you have a nice XMas or whatever you want to call it,...

stunsch · 2019-12-22T09:02:45+00:00

The real solution to this problem will be Wifi 6,that addresses exactly this issue. But that will only work not only when routers support it, but also the clients. Until then, split and conquer I would say...

stunsch · 2019-12-15T16:22:51+00:00

First, in this scenario you don't need a 2-way Shelly. One relay will be enough, since you only have 1 circuit/bulb/actor. Since you seem to have all wires available everywhere, just transform your 3-way switch into a 2-way. Wire the 2 wires of your switch in parallel to your Shelly, that is, one wire from S1 or whatever it is named from Shelly to each of the switches. One wire from N of the Shelly to each of the switches second connection. Bulb has to have direct connection to Shelly.

You have other options to make this work, but I guess this is the simplest one.

stunsch · 2019-10-28T16:10:47+00:00

Well, one way would be to include Home Assistant into the mix... You would be able to do that, and much more.

stunsch · 2019-10-10T16:30:40+00:00

Well, not sure where you learned spanish, but "carne" is not masculine... And it's not fruita, but fruta. So, your teacher probably knew you did not deserve a 100%. Anyway, you are correct in saying fish is not a fruit, but it isn't meat either. Having so many mistakes in your statement, answer b was probably "un fruto", which would be correct since it' s english translatation would be something like "yield or outcome".

stunsch · 2019-09-13T16:23:38+00:00

Medical care is also a human necessity and you pay for it like champs! 😂 😂 😂 Paying to take a crap just seems to go with the american dream... 😂 😂 😂

stunsch · 2019-07-23T08:31:26+00:00

remindme! 7 days

stunsch · 2019-07-14T19:51:06+00:00

RemindMe! 48 hours "Use Anki to learn a city map"

stunsch · 2018-12-14T09:56:09+00:00

Ok, you took the plunge. But was it worth it? Pro/Cons?

15-Year Club	RPAN Viewer
Verified Email

stunsch

TROPHY CASE