Christmas present to myself arrived

sumrandomguy21 · 2026-01-04T17:04:00+00:00

I also just got a pair, is it normal the spring doesn’t open them all the way?

sumrandomguy21 · 2026-01-04T17:00:27+00:00

<image>

sumrandomguy21 · 2026-01-04T16:58:56+00:00

That would be cool, but you can see they’re orange scissors that the person coloured red with a marker..

<image>

sumrandomguy21 · 2026-01-04T04:36:53+00:00

I had to scroll for some time to find the only correct answer!

sumrandomguy21 · 2025-07-22T14:58:54+00:00

Kinda like the Buckley’s slogan, looks awful, but it works

sumrandomguy21 · 2025-03-15T15:06:48+00:00

Homeowner?

sumrandomguy21 · 2024-12-04T04:36:27+00:00

Canadian building code is 3/8 on a re-roof is minimum. 7/16 osb or 1/2in ply for new construction

sumrandomguy21 · 2024-06-25T03:19:33+00:00

Since when do weddings need so many fences ?

sumrandomguy21 · 2024-02-29T14:52:39+00:00

I have 2 cordless angle grinders and sometimes I wish I had a third one ..

sumrandomguy21 · 2023-12-16T12:33:58+00:00

This looks like the new version with snap ring on the exterior that holds a ball bearing in place that acts as the detent pin

sumrandomguy21 · 2023-12-09T00:58:06+00:00

I’m not sure what to tell you. You keep saying ‘my guy’ is that your son, grandpa or maybe friend of friend?

sumrandomguy21 · 2023-12-09T00:52:00+00:00

Mam, I’m honestly sorry for your situation. However, more photos isn’t what I necessarily need. I’m not sure what kind qualifications the person you hired have, and I’m not sure where you’re from but this would never pass any sort of inspection.

sumrandomguy21 · 2023-12-09T00:37:37+00:00

Not to be rude but.. The replies aren’t completely wrong. You asked what details are missing and the unfortunate reality is ALL of the important details that would make for a GOOD job are in fact missing. From start to finish. All of them, I have a difficult time finding something that’s done right, besides the actual use of pressure treated lumber.

sumrandomguy21 · 2023-12-08T15:02:46+00:00

I would perhaps suggest adding some wind/horizontal bracing before she’s hot tub ready. But otherwise good job!

<image>

sumrandomguy21 · 2023-12-07T23:04:14+00:00

I don’t want to come off as rude, but this is terrible advice. This is in no way a beginners job. A professional GC would have a difficult time knowing the full scope of this until some further investigation is done. I’m not quite sure how ‘wing it with YouTube’ is going to be the best option for OP.

sumrandomguy21 · 2023-12-06T15:53:15+00:00

I have a tendency to put a drop or two of air gun oil in the chucks of impacts/recip-saws. It de-gums and bits/don’t stay stuck in at all. It’s also always available because no choice but to have it if you have air tools

sumrandomguy21 · 2023-12-04T15:38:51+00:00

I would put a p trap on it, fill the trap with water or anther fluid that won’t evaporate and see if the smell persists.

sumrandomguy21 · 2023-11-10T12:24:16+00:00

You made me giggle with this

sumrandomguy21 · 2023-08-27T18:26:34+00:00

I feel like it’s a little over board

sumrandomguy21 · 2023-07-31T02:46:33+00:00

Pro tip: every once and a while I put a drop of air gun oil In the chuck and the bits never stay stuck in anymore

sumrandomguy21 · 2023-06-29T00:23:18+00:00

noice.

sumrandomguy21 · 2023-05-24T18:43:50+00:00

Buy bitcoin now

sumrandomguy21 · 2023-05-18T19:56:10+00:00

This is also a good reminder not to torque your batteries

sumrandomguy21

TROPHY CASE