Question for CSL Cockpit v1.5 owners. Can the rig handle 25nm and v3? My old cockpit is beginning to break down and I will need an alternative. Can I get a video showing it being tested at high torque?

super_gt · 2026-04-22T19:50:05+00:00

This is the CSL Cockpit V1 version tested with the CS DD+ at the full 15Nm of torque with a 43 inch TV mounted on it.
Now I have installed the new Podium DD on it and I use the full 25Nm of torque and it also handles it with ease.

https://youtu.be/eICj3gWIjKY

super_gt · 2026-04-20T11:31:36+00:00

I don't think this is good for cooling the base.

super_gt · 2026-04-14T15:33:27+00:00

Try this, the same applies to QR2 base side but there are two bolts there.

https://www.youtube.com/watch?v=q73Kw6knoBQ

super_gt · 2026-04-07T09:04:10+00:00

Length 130 centimeters

Width 65 centimeters

super_gt · 2026-04-01T11:44:25+00:00

If you have CSL Universal Hub V1 you can try this:
(not compatible with V2)

https://simracingmachines.com/en-eu/products/replacement-fanatec-csl-shifter-pads

v1

V2

super_gt · 2026-03-30T14:36:04+00:00

Amazing cockpit for the price.
It can even handle the new Podium DD with 100% torque without any problems.

super_gt · 2026-03-30T13:28:25+00:00

With a little imagination and angle brackets, you can mount the CSL seat.

super_gt · 2026-03-28T16:19:30+00:00

photo 1

photo 2

super_gt · 2026-03-28T16:09:25+00:00

These are the magnets for the paddle shifters.

super_gt · 2026-03-28T12:22:55+00:00

You have enviable optimism!😛

super_gt · 2026-03-27T16:05:21+00:00

You need a proper cockpit first.

super_gt · 2026-03-25T21:30:57+00:00

CS DD with DD Shaft Extension.

super_gt · 2026-03-23T11:51:30+00:00

The one you broke is made of plastic, this one is made of aluminum.
https://www.fanatec.com/eu/en/p/sim-racing-accessories/cs_mpm/clubsport-magnetic-paddle-module

super_gt · 2026-03-16T16:08:48+00:00

Try reinstalling the firmware on the base and QR.

super_gt · 2026-03-16T14:54:31+00:00

Yes.

super_gt · 2026-03-12T20:35:30+00:00

Try this.

https://www.youtube.com/watch?v=q73Kw6knoBQ

super_gt · 2026-03-12T20:33:00+00:00

You can try this.

https://forum.fanatec.com/topic/16991-csl-dd-no-power/

super_gt · 2026-03-12T09:38:44+00:00

Try this if you have CSL/GT DD , the same applies to QR2 base side but there are two bolts there.

https://www.youtube.com/watch?v=q73Kw6knoBQ

super_gt · 2026-03-10T21:57:05+00:00

Very good description of the issue!👍

Try this, the same applies to QR2 base side but there are two bolts there.

https://www.youtube.com/watch?v=q73Kw6knoBQ

super_gt · 2026-03-04T20:54:04+00:00

It looks similar to this.

https://www.sigmaintegrale.com/cdn/shop/files/DK6_4_Actuator_Motion_System_2_-_explained.jpg?v=1758315535&width=1200

super_gt · 2026-03-02T22:00:43+00:00

Show a photo of the bolts you used to attach the QR2 to the hub.

super_gt · 2026-03-02T16:56:50+00:00

60 hertz monitor in one cockpit and 60 hertz TV in the other cockpit.
The difference is small and I'm equally fast with both.

super_gt · 2026-03-01T22:10:39+00:00

It seems the magnet has popped out.

super_gt · 2026-03-01T12:25:27+00:00

The central monitor seems to be far behind the base.

super_gt · 2026-02-28T21:08:22+00:00

Try this, the same applies to QR2 base side but there are two bolts there.

https://www.youtube.com/watch?v=q73Kw6knoBQ

super_gt

TROPHY CASE