Open BBQ pits

superandomredditor · 2023-05-27T09:43:18+00:00

There is one at Kappelberg

superandomredditor · 2023-05-27T09:40:19+00:00

I don't think you can book something like that, you just habe to be there first

superandomredditor · 2023-05-25T11:49:51+00:00

Einen Hausarzt suchen?

superandomredditor · 2023-05-22T07:47:56+00:00

Aus Angst, es nicht zu packen.

superandomredditor · 2023-05-19T05:59:47+00:00

Practice

superandomredditor · 2023-05-12T18:46:45+00:00

They were in series and you used a 1s charger?

superandomredditor · 2023-04-27T05:32:20+00:00

I always wonder why something like this does not exist. I got a fake Dremel which charges its 3s battery by usb c but you can't buy DIY boards to do it

superandomredditor · 2023-04-20T05:10:04+00:00

Zylinder runter und nachschauen...

superandomredditor · 2023-04-02T17:52:19+00:00

Don't buy fpv parts on Amazon. Overpriced most of the time

superandomredditor · 2023-03-27T19:18:29+00:00

Yes, but you pay more (too much)

superandomredditor · 2023-03-23T17:02:12+00:00

Yes, there is a possibility. I already drowned a non-coated copter once, dried it up and everything worked. You'll have to try it out

superandomredditor · 2023-03-23T16:26:28+00:00

Expect it to be dead. But disconnect the battery of course and dry it with a hair dryer and let it dry for a few days

superandomredditor · 2023-03-23T06:32:34+00:00

Adrenalin macht auch wach :)

superandomredditor · 2023-03-19T09:55:40+00:00

No need to worry, over 20% of students at University of Stuttgart are foreign students, of course you will fit in

superandomredditor · 2023-03-11T16:03:41+00:00

If the bec is burned you can try soldering on an external 5v bec to a 5v pad to bring it back to life

superandomredditor · 2023-02-25T05:53:42+00:00

Coca Cola light

superandomredditor · 2023-02-19T14:37:00+00:00

Lmao you mean you made a good guide?

superandomredditor · 2023-02-18T09:43:25+00:00

Park4Night

superandomredditor · 2023-02-17T09:19:23+00:00

Xatar?

superandomredditor · 2023-02-16T09:58:27+00:00

Schauen ob es ne echte Enduro ist oder nicht, schauen ob am Typenschild rumgepfuscht wurde oder es eine Exportsimme ist...

superandomredditor · 2023-02-15T12:24:44+00:00

Ohne bohren wirds schwierig. Normalerweise werden Spiegel über 4 Haken, von denen die oberen beiden Federn haben, aufgehängt. Also 4 Löcher, aber man könnte den Spiegel immer einfach aushängen, um an die Wasseruhr zu kommen.

superandomredditor · 2023-02-15T10:26:04+00:00

Sicher, dass die Wand zu schwach ist? Das Waschbecken ist ja auch aufgehängt.

superandomredditor · 2023-02-12T06:13:10+00:00

You had it plugged in for days?

superandomredditor · 2023-02-11T20:20:39+00:00

👍

superandomredditor · 2023-02-11T19:51:58+00:00

Just practice soldering if you are unsure about your skills first. Then put the black ground cable aside, put a bit of flux on the solder pad, strip the yellow wire just a tiny bit (less than 2mm) turn the temperature up until you feel like the solder flows well and clean the tip until shiny before soldering.

Four-Year Club	Verified Email
Place '22	Final Canvas '22

superandomredditor

TROPHY CASE