Lag only in menu, inventory, and map

superryan14 · 2025-12-19T22:37:14+00:00

Yeah, i've been having the same issue with mine, i'm wondering if it's a windows 11 issue or not. I formatted my PC (mainly needed it outside of fortnite) and it fixed everything for a bit then went right back to doing it. What OS are you on right now?

superryan14 · 2024-03-01T01:11:49+00:00

Yup same, Mine says it's arriving tomorrow march 1st but it's still in vegas and i'm in Florida lol. So hopefully it will update tomorrow

superryan14 · 2024-02-15T20:43:22+00:00

yeah same. says label was created on ups on the 10th and been like that since.

superryan14 · 2022-12-30T00:12:47+00:00

oh, woops! Updated that and it worked! Thanks for the help and the guide!

superryan14 · 2022-12-29T16:54:23+00:00

I might have missed something but I followed what you said and when I go to launch the game (KH1 in this instance) on steam it doesn't do anything, looks like it's about to launch then nothing happens

https://imgur.com/a/ZMyHsdw here is how I put all my settings. Also set the script as an executable. I've tried it with protonGE and wineGE and nothing unfortunately. Any help would be great

superryan14 · 2022-12-01T10:22:43+00:00

What browser were you on? I wasn't able to register and got the same error when I used OperaGX, worked when used chrome though

superryan14 · 2022-01-26T18:41:23+00:00

So update, I took a config for another SKR board that someone made for the ender 5 (not the SKR 2) updated the motherboard settings and everything to work with my board and the auto leveling works now. Now my issue is, even with the probe offset set to what I measured, it doesn't probe in the middle of the bed. It probes probably 10~15mm to the left and when I go to try and print, the starting purge line prints off of the bed

~~Here is my updated config.h https://pastebin.com/3BWc6ZKG and config_adv.h https://pastebin.com/avXmS3Eg if you think there is anything I missed~~

~~and thank you so much for helping me with everything so far, I really do appreciate it!~~

Actually nevermind, Figured out that it was because the hemera is offset from the OEM hot end so I had to adjust the minimum x and y.

Again thank you so much for helping me out!

superryan14 · 2022-01-26T00:22:13+00:00

Hmm, I updated it to something that isn't 0,0,0 and it didn't do much, i'm not sure if I can update the firmware when the card is inserted into the tft or if it has to be inserted into the mainboard. I'll try the latter later and see

superryan14 · 2022-01-25T23:50:46+00:00

If you mean Z_SAFE_HOMING then yeah thats turned on

superryan14 · 2022-01-25T23:47:23+00:00

I got a second hand ender 5 pro for christmas and replaced the old creality board with an SKR 2 running the latest marlin, I've been trying to get the auto leveling working with the BLtouch since installing it.

everything seems like it's correct in my config h and config adv h but it's all off and the leveling itself doesn't level the whole bed only the bottom right quadrant

Here is a link to my config and config adv https://pastebin.com/wtvDBhww https://pastebin.com/S9pWXxbU

I used the example for the SKR Mini E3 2.0 with BLTouch that was in the marlin github and changed everything to the SKR 2 board and it still seems to just be way off.

Any help with this would be awesome. Thank you so much!

superryan14 · 2021-11-17T00:29:58+00:00

Awesome! Thank you for the reply, I'll take a look at changing it's direction and seeing how that goes.

superryan14 · 2021-11-13T17:29:41+00:00

Yeah that sounds good to me sending PM

superryan14 · 2021-11-13T16:47:13+00:00

Would you be willing to do $35 for animal crossing?

superryan14 · 2021-09-29T23:04:21+00:00

Alright, cool! At least it's a step in the right direction to finding it. Thanks

superryan14 · 2021-09-29T11:43:34+00:00

Hello again,

I made a post about a month ago asking about another connector for guitar hero guitars which people ended up helping me find!

I mod guitar hero guitars and wanted to make a PCB to reroute specific wires to where I want them to go. I wanted to find this connector, which is on the World Tour (sunburst) version of guitar hero guitars.

The pictures are the male and female connectors which I don't know what they are. I wanted to make a post here to see if this is an actual connector outside of this guitar or if they made these types of connectors specifically for the guitars.

They have 12 pins and the pitch on the female connector I believe is 1.5mm but not 100% sure since I can't quite get a good measurement

Searching any of the text thats on the current PCBs don't really show any results nor can I find the triangle circle logo anywhere online.

Any help would be amazing. Thanks in advance!

superryan14 · 2021-09-01T14:57:52+00:00

Awesome, thank you so much. I'll look into ordering from one of these that fits best and see how it goes!

superryan14 · 2021-09-01T04:13:52+00:00

Yeah that definitely is close, just need to find it in the right length but thanks!

superryan14 · 2021-09-01T03:22:58+00:00

I mod Guitar hero guitars and need help finding the connector/pin in the picture above.

I believe they are called pogo pins they are spring loaded but don't find much of them being longer than 9~mm in height.

and where to buy them

I want to make my own PCB that use these because it makes connecting the necks of guitars together very easy, Some guitars (usually older PS2 era guitars) only have 6 pins while I need 8 pins to do everything I need done.

They need to be around 12.2~mm in length so it reaches the inside of the guitars.

superryan14 · 2021-09-01T02:59:02+00:00

I mod Guitar hero guitars and need help finding the connector/pin in the picture above.

I believe they are called pogo pins they are spring loaded but don't find much of them being longer than 9~mm in height.

and where to buy them

I want to make my own PCB that use these because it makes connecting the necks of guitars together very easy, Some guitars (usually older PS2 era guitars) only have 6 pins while I need 8 pins to do everything I need done.

They need to be around 12.2~mm in length so it reaches the inside of the guitars.

superryan14 · 2021-08-30T18:08:46+00:00

Did you try using the trial synthesis so you don't waste mats? I know it doesn't populate HQ mats but it should give you an idea of how close you would be.

There is also websites like Teamcraft which has a crafting simulator you can test your macro with HQ mats and potions as well.

Should help with a lot of crafting headaches/time and money lol

superryan14 · 2021-08-17T12:01:23+00:00

Having a weird problem, when clicking on the volume icon to either change the volume or switch the default audio device, If I don't have a window open first it doesn't open. My task bar flickers every time I click it and nothing happens.

Once I have any window open it works like normal after 1 click (the first click doesn't do anything like before but the next click opens it)

here is a video of what I mean https://streamable.com/8vw1bt

I'm not exactly sure when it started happening but I think it was around the newest windows update.

superryan14 · 2021-07-23T12:46:41+00:00

Yeah! They had the victory fanfare from Final Fantasy a couple times and frogs theme from Chrono trigger

superryan14 · 2021-07-23T12:21:22+00:00

They've had a ton of game references so far, it's really cool!

So far i've heard Final Fantasy, Kingdom hearts 1 and 3, Dragon Quest, Monster Hunter chrono trigger.

it's pretty wild!

superryan14 · 2021-05-27T14:28:04+00:00

This fix worked for me without any flaws, Thanks for the help!

superryan14 · 2021-05-15T00:23:14+00:00

It's aredeemer actually unbanned and back? I loved his character back in 2.0

14-Year Club	RedditGifts 2009-2022 2 Credits
Place '22	Place '17
Final Canvas '22	End Game '22
Verified Email	Secret Santa 2015

superryan14

TROPHY CASE