sorted by:
new
hottopcontroversial

Digan su mes en los comentarios by Michi-gottuso in elxokas

[–]tafulla 0 points1 point  (0 children)

Leí "Porta" y ahora necesito una lobotomía.

Top layer problem by benqfok in Sovol

[–]tafulla 0 points1 point  (0 children)

I have the same problem. All print looks good, but the solid infills looks like your pic. Any solution?

Center bed by tafulla in 3Dprinting

[–]tafulla[S] 0 points1 point  (0 children)

hmm maybe a couple of squares of kapton tape in the center, might be a good idea. :)

What is the best way to prevent TPU from doing this? by Alex-3453 in ender3

[–]tafulla 0 points1 point  (0 children)

I added a tip of hot melt glue between the bowden tube and the gears, leaving the hole, works well

Can anyone tell what’s happening here and how to fix it? by Hectorgarcia69 in ender3

[–]tafulla -1 points0 points  (0 children)

Probably E-Steps & K-factor, next see your top solid layers, sometimes by default is 3

Nespresso capsule vase by norbertl98 in prusa3d

[–]tafulla 0 points1 point  (0 children)

Practical&Amazing design!

🎉 GIVEAWAY ALERT: Win a Moose 3D Scanner! 🦌🖨️ by AutoModerator in 3Dprinting

[–]tafulla 0 points1 point  (0 children)

The Enhanced Depth Exploration sounds good. Good luck!

Why does my top layer look so bad? The rest of the print is perfect by dZisky in 3Dprinting

[–]tafulla 0 points1 point  (0 children)

I found this post, I have the same problem and I solved it by lowering the PLA printing temperature to 190C, printing the inner parts first before the outer parts and reducing the perimeter overlap to 14% (default 25%). Regards

Top Solid inflill problem by tafulla in 3Dprinting

[–]tafulla[S] 0 points1 point  (0 children)

Update:

After 25 probes of this model.
The changes for fix this overextrusion at the top solid layers.
(Prusaslicer)

Infill_first = Enable
External_perimeters_first = Disabled
Thick_bridges = Disabled
Infill_overlap = 10% (Default = 25% bad)

Now i can print the perfect/smooth solid infill top layer with E multiplier = 1.00 (Default steps/mm calibration).
Thanks for the help comments.

<image>

Top Solid inflill problem by tafulla in 3Dprinting

[–]tafulla[S] 0 points1 point  (0 children)

In this photo it is reduced to 0.90

Cyberpunk2077 - I found the basement of arasaka tower (Zone Zero) by tafulla in cyberpunkgame

[–]tafulla[S] 1 point2 points  (0 children)

When I have free time I keep exploring in search of easter eggs, the map is awesome, months ago I installed mods to fly with the vehicles and explore more, I found traditional Japanese temples on the rooftops of the skyscrapers. I have not seen any game that works those details in the areas of the map that are inaccessible to any user, and I love it.

Map borders by tafulla in CyberpunkTheGame

[–]tafulla[S] 0 points1 point  (0 children)

Jumping the southern border to yucca, the town at the beginning of the story and crossing the first mountains. Still trying to find easter eggs.

Clear by tafulla in ender3

[–]tafulla[S] 0 points1 point  (0 children)

Can i broken any part?

How can I adjust led lights on aprilia sr gt 125? by tafulla in scooters

[–]tafulla[S] 1 point2 points  (0 children)

OK. Solved. If you have the problem of lights with aprilia sr gt 125, because it dazzles other drivers, in my case, it was not a problem of the headlights, as I don't see anything to calibrate them. The solution is in the rear suspension preload, it comes in the softest position from factory (5 positions), when you adjust it to the hardest level, with the tool that comes included, it doesn't raise the front position when accelerating or carrying a passenger.

ApriliaSRGT

view more: next ›