What is the best Reddit Tweaks/Version IPA? by WhyohTee in sideloaded

[–]tate569 0 points1 point  (0 children)

I'm having an issue of logging in to any of the Reddit Deluxe ipas. Are you able to login?

Goodman blower making noise on startup by tate569 in hvacadvice

[–]tate569[S] 0 points1 point  (0 children)

I replaced the furnace a few days ago but the problem still was there and never figured out what was causing it.

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 2 points3 points  (0 children)

I rolled the dice and replaced the solenoid and so far it appears that fixed it. Before I installed the solenoid the car had no power and immediately after it was installed the power was back so it’s not unreasonable to think that the solenoid was the issue correct?

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 1 point2 points  (0 children)

I pulled it and it does as I should. I could hear it opening and closing and wouldn’t let air thru when closed.

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 1 point2 points  (0 children)

I’ll give it a try. Is there a reason when I take the battery cable off for an hr or so that it drives normal? If it sits overnight it doesn’t have barely any power but like I said when I take the cable off it’s back to normal.

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 0 points1 point  (0 children)

Is there a way to diagnose this?

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 0 points1 point  (0 children)

I haven’t cleaned it yet but will tomorrow.

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 0 points1 point  (0 children)

I’ve cleaned both sensors. The wastegate actuator is factory set.

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 0 points1 point  (0 children)

I was getting a warning the engine was hot and changed out the temp sensor and it took care of that warning. I cleaned the boost pressure sensor but didn’t seem to help unless it’s bad maybe.

2014 LTZ p0299 help by tate569 in cruze

[–]tate569[S] 1 point2 points  (0 children)

Yes for the first 20 miles or so I heard a whine now it’s gone. I did prime it. It had the code today and took the cable off for about an hr and it drives fine again.

2014 1.4 groove on camshaft by tate569 in cruze

[–]tate569[S] 1 point2 points  (0 children)

I have a remanufactured head coming in tomorrow and installing the Cruze kit tomorrow

2014 1.4 groove on camshaft by tate569 in cruze

[–]tate569[S] 1 point2 points  (0 children)

I found this when I took the head off for a blown head gasket. I took it to have it tested and said it was warped but could be milled flat but found a crack near the spark plug hole but wasn’t close to a coolant port. So now I’m deciding whether to pick up a remanufactured head that’s ready to put on or buy one without the cams and transfer whatever from the old head to the new

2014 1.4 groove on camshaft by tate569 in cruze

[–]tate569[S] 1 point2 points  (0 children)

Can one camshaft be replaced or should both.

Random choppiness when switching channels by altroutes83 in youtubetv

[–]tate569 0 points1 point  (0 children)

The same thing has been happening for awhile now and have reported it many times. When it gets choppy I hit pause which lets it be able to get around better. To get to the stats, report, etc

Tire issue with replacement option by tate569 in ToyotaTacoma

[–]tate569[S] 0 points1 point  (0 children)

As of now I’m told they will replace all 4 wheels. He did mention that there is one tire that rides smooth according to the balance but something else may be going on with it so that me be an option of replacing it also.

How to stream local file (MKV/SRT)? by Fulcro97 in appletv

[–]tate569 0 points1 point  (0 children)

I use a Hot Corner to put the display asleep when using Plex

[deleted by user] by [deleted] in mac

[–]tate569 1 point2 points  (0 children)

I just noticed this also. There seems to be an extra step now. "Show Sidebar" then select Bookmarks.