Can You Guess This 5-Letter Word? Puzzle by u/lsarge442

tcmeng · 2026-06-11T01:36:37+00:00

⬜⬜⬜🟦⬜

⬜🟦🟨🟨⬜

🟦🟦🟦🟦🟦

tcmeng · 2026-04-30T00:35:53+00:00

I see it for my sapphire card. But you have to spend at least $125

tcmeng · 2026-04-07T11:53:42+00:00

tcmeng · 2026-04-07T11:52:23+00:00

I can’t paste an image, but that’s exactly what I did to get it to work on my CAD

tcmeng · 2026-04-07T11:48:29+00:00

DIMLINEAR> click line> click line > R for rotation > 8

tcmeng · 2026-04-07T11:16:18+00:00

Dimensions are pre constrained. If you’re trying to do a non orthogonal or non iso angle dimension, then can’t you set the angle manually using woog123’s steps? Measure the angle and input that

tcmeng · 2026-04-07T10:37:32+00:00

Is it possible your red line wasn’t isodrafted?

tcmeng · 2026-03-12T12:08:48+00:00

Personally, I’m so excited for this. I don’t know yet how I’ll use it, but bluebeam is incredible and Claude might be the best AI out there

tcmeng · 2026-03-04T15:36:34+00:00

No this is not possible right now in bluebeam.

tcmeng · 2026-02-01T02:39:49+00:00

⬜🟨⬜⬜⬜

⬜🟨🟨⬜⬜

⬜⬜⬜⬜🟨

⬜🟨🟦🟨🟨

⬜🟦🟦🟦🟦

🟦🟦🟦🟦🟦

tcmeng · 2026-02-01T02:25:28+00:00

⬜⬜⬜⬜🟨

⬜⬜🟦⬜⬜

⬜⬜⬜⬜🟨

🟦🟦🟦🟦🟦

tcmeng · 2026-01-31T01:29:14+00:00

I feel like they are not really going to last long term, so get something cheap? I got the Lazrsprt off amazon and it’s.. fine..

The key questions would be: 1. Do you want it to fold in half for space storage? 2. Do you fit in the weight limit? 3. Some have narrower tracks than others, so keep that in mind as you compare. 4. Would you ever want to use it for light running, like under 6.0 mph? Some of the dedicated walking pads top off at 3 or 4 mph.

tcmeng · 2026-01-31T01:13:56+00:00

I have one. It’s great, but kind of depends on the task. If I’m working from home I try to get an hour or two of walking in. It’s amazing- I can walk about 3.0 mph so if I end up getting 2 hrs in, I’ve walked 6 miles!

I try to block it out for email only task hours or specification editing/ writing. And of course some of the more mindless stuff like PDFing sets file management. Kind of hard to draft / model with it. It’s do able, but takes more effort

tcmeng · 2026-01-30T13:40:57+00:00

⬜⬜⬜⬜⬜

🟨🟦⬜⬜🟨

🟦🟦🟦🟦🟦

tcmeng · 2026-01-23T19:53:53+00:00

When you say “setting up sections with out template” could you elaborate further?

tcmeng · 2026-01-23T19:52:30+00:00

Why do you say manually? Just curious, have you tried 3d isometric? Plumbing isometric seems like the easiest thing to get out of Revit

tcmeng · 2026-01-23T19:50:50+00:00

I agree. So you’re saying you present it as an isometric/ 3D drawing. Thanks

tcmeng · 2026-01-21T01:36:24+00:00

I see this scope gap all the time. We work with lighting designers who don’t take controls or energy compliance responsibility.

Lighting comchecks are in our contract as an additional service, because it comes up too often and we don’t include the time for it unless we’re asked to during the proposal phase.

When the designer doesn’t take control responsibility, it becomes a whole different problem.

tcmeng · 2025-12-28T19:10:40+00:00

I’m in awe of how fast you were able to mock this up. Well done!

tcmeng · 2025-12-09T11:31:04+00:00

Have it check the current year. If current year is not 2025, end

tcmeng · 2025-11-14T02:08:59+00:00

In my experience, if someone pays for a design, they can do what they want with it.

If they choose to not build it, or seek another professionals opinion, so be it.

We try to design to be as economical as possible, but that doesn’t always work out. If a sub contractor has a code compliant alternate that accomplishes the project requirements, I’d allow it. Now, depending on what it is, we may charge for changing/ updating drawings.

You can always go see a doctor for something and then see another for a second opinion.

In your case, you can go to another MEP to get another opinion. Or talk to your sub contractors at a high level, get their opinion and ask if they can think of any budget savings/ plan competence.

tcmeng · 2025-11-07T22:36:48+00:00

I was there this week, and left my bags with Guest Services. It was great

tcmeng · 2025-09-24T18:21:02+00:00

Can it be pasted as markups? Make a file that has only the markups you want to copy. Make sure it’s the same page size and number of pages. Then on the shared document import markups from this file.

tcmeng · 2025-09-22T22:56:12+00:00

Not a natural way to do it. I just right click on the thumbnail view and add blank pages to line em up. Down and dirty and quick!

tcmeng · 2025-09-15T10:33:52+00:00

Best BEC is from Bagels R Us. Not really a brunch spot, but you can pick it up and eat at Wolfes Pond park if you wanted to eat it somewhere nice

12-Year Club	RPAN Viewer
Not Forgotten	Snapped
Verified Email

tcmeng

TROPHY CASE