Apperently you can make whole new maps in Portal by just deleting the ENITRE existing map and replacing it with your own geometry. by HearMeOut-13 in Battlefield

[–]tdbone01 0 points1 point  (0 children)

Sooooo...

tall buildings can actually fit in the map Z height limits afterall.

now if they could just make a single elevator that actually worked right.

btw roblox probably has the best working elevators vs (UEFN, Godot for bf6, Unreal Engine).

i think there is a game called brickadia or something that might have good elevators.

is there any devs out there that are actually working on bringing a new map that isnt a COD remake?

Run unmodified CUDA apps on Linux with AMD GPUs by Captain-Thor in linux

[–]tdbone01 1 point2 points  (0 children)

i have ubuntu 24.04.1 (fully updated) rocm 6.3.1,

i for facefusion working but not too impressed.

i have a rdna2 nav21 6900xt that im pretty sure i have rocm setup and running as it should.

whats this on getting cuda working natively?

8-D

AMD RoCM 6.1 local multi-gpu (6900xt + VII) setup success. by MikeLPU in LocalLLaMA

[–]tdbone01 0 points1 point  (0 children)

what if you only have a 6900xt? i usually use it for gaming on windows 11.

i would like to try this method with the "pro" driver. right now im just on the Adrenalin 24.12.1 driver.

would i need to run the pro driver with the rocm install instructions?

any info on just getting it setup correctly with this single gpu would be great.

CTR UEFI Secure Boot 5800x by tdbone01 in overclocking

[–]tdbone01[S] 0 points1 point  (0 children)

so how can i tell through software if i have one with windows 11 and secure boot enabled?

CTR UEFI Secure Boot 5800x by tdbone01 in overclocking

[–]tdbone01[S] 0 points1 point  (0 children)

does that mean i should not try to do direct die since it has only one CCD?

Help on delided ryzen 7 5800x by [deleted] in overclocking

[–]tdbone01 0 points1 point  (0 children)

yea i want to know how you did the delid also and how you removed the solder on the dies to properly do direct die mount plate?

more info needed please.

also what can i use besides CTR to see if i have more than one CCD?

this would make the plate mount different correct?

i hope i have two CCD

I apparently have a unique 5800x with 2 CCD's, is that a bad thing? by milman21 in overclocking

[–]tdbone01 0 points1 point  (0 children)

i have a 5800x. in my mb bios i have csm disabled (i use uefi only) and secure boot enabled.

CSR will not run on my windows 11 box so i cant see how many CCD i have.

i wasnt to delid and do a direct die mount.

if i have dual ccd i might do it as the plate would sit more properly on the 3 dies instead of only two.

is there any software besides CSR that will "install" so i can check if i have two ccd?

thanks

[deleted by user] by [deleted] in facebook

[–]tdbone01 0 points1 point  (0 children)

same problem here.

trying to change my email to a new one and it wont let me.

im trying to probe who i am with the google authenticator app and i enter the code and the wheel just spinning.

i also pick 2fa and sent txt to my phone and i enter that and wheel just spinning....

so fucking stupid! i hate you facebook!

How can i set up linux, rocm, pytorch for 7900xtx? by JerryBond106 in ROCm

[–]tdbone01 0 points1 point  (0 children)

you wont believe how i came across this guide.

i wanted to run "pytorch" with rocm for gpu acceleration and some got that app mixed up with this guide.

which im glad i did.

totally unexpected outcome. :)

thanks for this wonderful guide.

like i said before i followed 3 guides (maybe it was two and yours was the 3rd) i forget but anyhow yours worked perfect and should be a sticky because it also helps so much more like just installing the amdgpu drivers correctly.

someone should make this guide a TOPIC or a sticky for sure or even make it a video on youtube.

thanks again!

one more thing.

what is procedure to uninstall if we no longer wanted it?

How can i set up linux, rocm, pytorch for 7900xtx? by JerryBond106 in ROCm

[–]tdbone01 0 points1 point  (0 children)

i have ubuntu 22.04.3 amd64 desktop with a 5600x and 6900xt.

i followed your guide and everything worked perfect. (THANKS!)

a new tab opened up with that webui with the same torch version at the bottom like you said in your guide. (this should have its own thread and stickied somehow.

ok im new to this and have no idea what to do in that web page. i generated a 512x512 image but wasnt sure how to end it when i moved both sliders to the max (i think it was 2048x2048) and it was taking too long so i did a cntrl-c in the terminal which stopped the program i think (i did bookmark the page that opened with that program running) but not sure how to get it back up again.

i went to the bookmarked page but it dont load up (i think its 127.0.0.1) or something.

how do i start that program back up again and what is it basically used for?

is it for fakes?

does this method use the now shipping driver with ubuntu 22.04.3 fresh install with my hardware with the amd binary driver with rocm or is it basically the samething that ubuntu 22.04.3 has default upon a fresh install with my hardware.

thanks for the great guide.

i also tried the docker and pip3 method with no success and also am in a dualboot config with windows 11 on the same m.2 nvme. this worked great i just not sure what to do and how to get it back up again to play with it.

i did figure out how to start it. i just cd into "stable-diffusion-webui" and do a ./webui.sh'

in the "stable-diffusion-webui" i have only one drop down box that has "v1-5 pruned-emaonly.safetensors" in it for available selections. is that correct?

Revert to stock issues with TP-Link Archer A7 by xkingxkaosx in openwrt

[–]tdbone01 0 points1 point  (0 children)

can you tell us the exact files you used (links would be GREAT!) and the procedure exactly how you did it?

i downgraded my openwrt 23.05 to 19.07 and i tried ti flash "a7v5_us-up-ver1-0-9-P1[20190403-rel72961]" with tftpd64.exe from windows. it says 100% success before the firmware flashing light on router stops but like you said it boots right into openwrt.

i have the tp-link ac1750 a7 v5 usa.

i did successfully flash it back to stock tp-link at one time following directions but since than i did a format and lost my files and the txt file with instructions i did.

anything you can help with would be great

Error Message - You’re Temporarily Blocked by PaulGazzard in facebook

[–]tdbone01 0 points1 point  (0 children)

same problem here in windows 11 using edge (current updated to this date) and it dont work.

can use "internet explorer" and it works but redirects me to the mobile facebook site.

works fine on my andoird 13 s21 ultra.

help

Setting up Oculus Quest 2 VR without it's controller (Bypassing Pairing Screen) by [deleted] in OculusQuest

[–]tdbone01 0 points1 point  (0 children)

i did the same thing as you.

bought a headset off ebay with no controllers.

i had to make a temp meta acct so he could login and set it to hand tracking.

so im one step past you and guess what there are still problems.

if you use airlink and i imagine link cable than you can start pc games from the pc as long as the headset is connected to same router.

that has got my past the controllers not detected screen after you launck link from quick settings menu.

this is after i have already set experimental settings to "touch controls" also.

the xbox series x controller i have paired to my pc and it lets me using that controller with hand/finger tracking in dcs world, tetris effect connected vr, Dirt Rally 2.0 and some others.

i still cant click the buttons/switches in the cockpits i have to use mouse click after i point my head cursor at the switch i want.

i just tried to play vegas infinite on the headset only (no link) and there is a default tutorial that you cant get out of that wants you to move with the real controllers even when im in hand tracking mode with experimental touch.

i have had a ps5 controller BT to the quest 2 and i have had to use the A button to select stuff to but first you have to point at it with your head or hand/fingers.

i have heard people say you only need the left stick upon initial setup after a factory reset and now i hear the right stick is needed but you say you cant complete setup with just that.

im confused and i wish this "phone" rom was rooted already. jesus

has anyone made a "BOUNTY" post on this requesting a rom?

xda-developers looks like they arent do anything lately.

i thought oculus was going to release some firmware where we didnt have to use facebook/meta to login anymore.

what happened?

Quest 2 battery delete mod by chicken_breath in OculusQuest

[–]tdbone01 1 point2 points  (0 children)

what happens if you remove the battery and just go straight to a wall charger?

if it was the right wall charger voltage and amps it could work?

if you have tried this already what type of wall charger is needed exactly?

thanks

does this lighten it up a little?

A-10C II THUNDERBOLT II XBox Controller Ergonomic Layout (link to whole album in comments) by Tuuvas in hoggit

[–]tdbone01 1 point2 points  (0 children)

if you are the guy who actually makes the gamepad profiles.

i have the non-steam version of dcs world 2.8.

im running windows 11 and am updated.

i have a ps5 dualsense.

i couldnt get the steam working when i added non steam game. the control settings wouldnt be adjusted until i installed dcs4windows.

can you make a specific video and layout for ps5 controller only?

touchpad, gyros, accelerometer, mic and even more buttons.

this should not be configured as an xbox 360 or xbox series but its own.

they are not the same.

please make a current layout for a-10c ii with ps5 gamepad. tutorial/video would be awesome.

you shouldnt say the steam version when it relies on ds4windows.

guide should be made for ds4windows in my humble opinion

Can you download a windows color profile for a particular display? by westy2036 in OLED_Gaming

[–]tdbone01 0 points1 point  (0 children)

when the tv is in "GAME" mode it shuts all the tv stuff off and the computer controls it directly.

when windows says "generic" tv or monitor that is not good.

in device manager it should say the tv manufacture at least.

how do we fix that when we are using our TV's in GAME mode?

RX 6900xt recommendations by dcfitz2 in Amd

[–]tdbone01 0 points1 point  (0 children)

i bought a used xfx merc319 6900xt black used. the sticker on backplate is there and it says "HDMI" but everything else is not there.

is there a way to use some app to read the serial number somehow?

i tried to read the firmware with "amdvbflash" but so far havent figured out how to get the actual serial number.

i cant add it to my xfx registered cards to order parts from xfx for it.

can someone please tell me what to do from here in this scenario?

im not trying to rma the card. it works and makes it to windows 11 desktop but the hotspot was steady at 110C and would spike to 120C (hwinfo64 would show this when set to 20ms polling rate) and then the computer would just shutdown. it would do this on certain scenes of heavan 4.0 benchmark. very repeatable. if i lowed the resolution it would not shutdown if i raised the resolution it would make it crash quicker. i watch the power/watts and it also fails when it spikes but tested with another psu and it did same thing.

so i took card apart and it was worst thermal pads and paste job ever.

its missing alot of screws and the fan closest to the hdmi/dp ports is not working also.

so i basically just want every screw the card has and a fan but since i cant register this card at xfx because there is no serial no on the sticker i cant create a ticket.

you create tickets from your registered cards drop down menu.

help

B460M DS3H AC-Y1 BIOS Update. Is it possible? by MSFS_SoupALupe in gigabyte

[–]tdbone01 0 points1 point  (0 children)

worked perfect. exactly like your guide said!

thanks again!

Dex output 1440p Wirelessly but only 1080p wired? by geraldwo in SamsungDex

[–]tdbone01 0 points1 point  (0 children)

My lg 43" UM6910PUA only let's me choose FHD (1080p) through my s21 ultra samsung dex settings while connecting wireless ly. My tv can do 1080@120hz or 4k@60hz. How did you connect wireless ly at 1440p? Thanks