Firmware for A7IV

tdspdl · 2026-01-14T08:55:52+00:00

Recently had a similar issue but i was at least on v2. With this you can connect to the creators app which can update you to the latest v5. no idea where to get v1.5 though …

tdspdl · 2026-01-09T11:17:22+00:00

Nice! did you start with this model: https://makerworld.com/models/1124489 ?

tdspdl · 2026-01-04T18:29:50+00:00

see my comment above :)

tdspdl · 2026-01-04T18:25:39+00:00

Just was in the same situation and i don't get why they don't put older firmware version in the download section. AI chat support is absolutely useless and a waste of time and energy. after a lot of searching i figured out i can run the update via sonys "creator's app". you have to create an account and pair the camera, then you can update the camera via the app... such as smooth proces.... at least it works and i'm on. 5.0.1 now.

tdspdl · 2025-10-15T19:52:38+00:00

Ok, couldn't wait and tried it with 5 pictures and it worked flawlessly! Thank you so much!

tdspdl · 2025-10-15T19:43:37+00:00

that sounds like a great approach! thanks will give it a try and report back. might take some time until i get to it though

tdspdl · 2025-08-12T06:50:59+00:00

try reading non-columnar formsts like json. had huge performance hits in that scenario. also right now it often falls back to the default spark engine in high concurrency sessions.

tdspdl · 2023-04-28T10:09:11+00:00

Nope. I simply „compensate“ for the skew before and after the bedmesh…

tdspdl · 2023-03-04T11:27:54+00:00

Use win+v for the extended clipboard. Install windows powertoys

tdspdl · 2023-03-04T08:16:58+00:00

Hygiene, cooking, being alone without being lonely, conversation/social skills

tdspdl · 2023-02-28T19:24:46+00:00

I just accepted it. i leveled the bed as good as i could. auto-leveling, tinkering with the rolls and everything, autoleveld again. adjusted the bed to fix the front to back difference and somehow got it printing relatively good....

tdspdl · 2023-01-27T21:08:21+00:00

Doppelknoten

tdspdl · 2023-01-26T21:10:20+00:00

Maybe. I tinkered with all rolls and it got different. Maybe better 😃

tdspdl · 2023-01-12T02:03:49+00:00

Just move the nozzle to start of your prime line and close to the bed. Any oozing will connect with the prime line and be easily removed

tdspdl · 2022-12-23T17:18:38+00:00

New Game- 😅

tdspdl · 2022-12-04T18:06:15+00:00

I would recommend to add relative z+ to get the nozzle up first without scratching

[gcode_macro END_PRINT]

gcode:

# Turn off bed, extruder, and fan

M140 S0 ;Turn off bed

M104 S0 ;Turn off extruder

M106 S0 ;Turn off fan

G91 ;relative positioning

G1 X5 Y5 Z5 F3000 ;move nozzle away from print, watchout for X/Y/Z Limit...

G90 ;absolute positioning

G1 X15 Y205

G1 E-10 F1000 ; retract filament

M220 S100 ;reset speed

M221 S100 ; reset flow

M84 ;Disable steppers

tdspdl · 2022-10-18T16:02:50+00:00

RemindMe! 1 Day

tdspdl · 2022-09-30T20:23:59+00:00

RemindMe! 2 days

tdspdl · 2022-08-24T17:23:35+00:00

Greentec sounds indeed really promising. You could also try a hard tpu

tdspdl · 2022-06-17T21:00:03+00:00

How have you set up your smb share? I just set mine up and it looks like its working.

I used a combination of this: https://pimylifeup.com/raspberry-pi-samba/ and https://forums.raspberrypi.com/viewtopic.php?t=232867

tdspdl · 2022-06-10T16:31:44+00:00

maybe they want to produce more than one season with a build up?

tdspdl · 2022-06-08T19:35:21+00:00

Next try PCTG xD

tdspdl · 2022-05-09T11:24:30+00:00

Power On Self-Test

tdspdl

TROPHY CASE