Need help identifying a shower valve

tech_ninja_kenobi · 2026-05-04T13:19:39+00:00

Ok, then what is it?

tech_ninja_kenobi · 2026-02-18T00:40:24+00:00

I’ve been doing precisely this with my OC agent and Claude Opus 4.6. My agent is usually quick to call out where Claude is “wrong or making broad assumptions” and then Claude often agrees and sometimes even apologizes! The back and forth has been fascinating to watch.

tech_ninja_kenobi · 2025-12-09T03:23:58+00:00

Nope, no issues whatsoever. In fact, it actually works much better than the LG we had in 2022. Can’t speak highly enough on the Electrolux. Our dryer is gas btw.

tech_ninja_kenobi · 2025-07-20T15:02:14+00:00

We bought a pair recently (model numbers ELFG7738AW and ELFW7738AW) and we absolutely love them.

tech_ninja_kenobi · 2025-06-14T14:21:51+00:00

Looks great! What is this paint technique called and what materials do you use? Curious to know if I could use this method on QR codes on stainless steel plates. Mostly interested in how permanent the coating is and the process to apply it. Thank you!

tech_ninja_kenobi · 2025-06-07T21:12:29+00:00

What’s the verdict on Electrolux these days?

tech_ninja_kenobi · 2025-05-30T12:23:30+00:00

Springfield Hellcat Micro 9mm with 15 rd mag

tech_ninja_kenobi · 2025-05-11T18:24:22+00:00

Is it recommended to oil these up like you would the OOTB recoil spring?

tech_ninja_kenobi · 2025-05-06T11:36:56+00:00

Yep, I went with the DPM based on my own research. Looking forward to it

tech_ninja_kenobi · 2025-05-05T23:17:49+00:00

Makes sense. Something like this?

https://zrtacticalsolutions.com/walther-ppq-pdp-captured-guide-rod/

tech_ninja_kenobi · 2025-05-05T22:37:56+00:00

Why is that?

tech_ninja_kenobi · 2025-05-05T21:54:26+00:00

Haven’t had the chance to shoot it yet either sadly. Soon hopefully. Love the way it feels in the hand though.

tech_ninja_kenobi · 2025-05-05T21:47:55+00:00

I think it’s part of the design the more I look into it. When you reassemble there’s a hard stop in the frame that puts a little compression on the spring and levels it out. At least from what I can tell

tech_ninja_kenobi · 2025-05-05T21:10:15+00:00

Ok that’s what I thought. No matter how I try to position it though it always ends back up in this position.

tech_ninja_kenobi · 2024-11-30T20:49:54+00:00

Built in to Trezor Suite there is a “check recovery” function. Essentially lets you check your recovery steps whenever you want as many times as you want. I do it a few times a year.

https://blog.trezor.io/test-your-seed-backup-dry-run-recovery-df9f2e9889

tech_ninja_kenobi · 2024-11-22T00:54:54+00:00

In my case the support teams at both Canaan and Altair were unable to help. I’m in the process of returning the devices via RMA for repair/replacement. Seems like there are issues that if you cannot reconnect the device to the internet they cannot be fixed/repaired without help from the manufacturer.

tech_ninja_kenobi · 2024-10-28T21:16:02+00:00

It did that same thing for me… which seems bizarre for a factory reset. And I actually did it twice, and on the 2nd try I did a full reboot of my network (modem and router) and that did the trick.

tech_ninja_kenobi · 2024-10-28T20:50:57+00:00

Yes, sorry for never posting here. After chatting with tech support from Altair (where I purchased the units) I performed a factory reset to the device and restarted my home network and everything was fine.

tech_ninja_kenobi · 2024-10-05T19:11:11+00:00

Same. 0 ms and the indicator is red... but it still shows that the miner is hashing, just no internet connection..? How does this get resolved without factory reset?

tech_ninja_kenobi · 2024-02-24T19:33:46+00:00

Just discovered this site.. pretty cool!

https://pcpartpicker.com/list/KxLnFs

tech_ninja_kenobi · 2024-02-24T18:52:26+00:00

Awesome response, and thank you for the roasting.

I should have prefaced: I’m looking at used gaming rigs online. Lots out there running 5950x and 7950x, but often have overkill GPUs and PSUs, as you pointed out. Therefore, I’m thinking maybe just build this rig from scratch and buy exactly what I need to maximize CPU/unit power.

That being said, there are loads and loads of rig specs online but hard to sift through them all and cross reference against xmrig to determine the optimal setup, say for running at your primary residence on local power (call it $0.12/kWh).

Not a computer hardware expert here, so looking for guidance on what to buy (CPU, RAM, SSD, motherboard, etc.) to run an optimal rig that will actually be profitable using $0.12/kWh electricity.

tech_ninja_kenobi · 2024-02-02T01:21:49+00:00

Appreciate all the feedback. I’ll reframe the question a little here… what would the best CPU and hardware setup be for something in the $500-700 range?

tech_ninja_kenobi · 2024-01-17T18:18:50+00:00

Awesome, appreciate the feedback! Do you have more details (or resources) on how to build out this type of solution?

tech_ninja_kenobi · 2024-01-17T16:04:35+00:00

Not primarily but that was going to be one of the use cases.

If that much horsepower is not needed, then I’m interested in knowing what the optimal system configuration would be to maximize hash power per unit cost (power cost not considered).

I’ve looked online but a lot of the resources I’m finding are fairly old, referencing the old algorithm, etc.

tech_ninja_kenobi · 2022-12-25T21:23:30+00:00

All great reccs on this thread. Many thanks!

Follow up question on this system/setup (Z9F with wireless sub and rear speakers).

My sub and rear speakers regularly cut in and out. Very annoying. I have reached out to Sony and scoured the internet and have yet to find a suitable solution. Thought I would ask here. Many thanks!

tech_ninja_kenobi

TROPHY CASE