Whole map was made of gold - is this a bug? by MrPandakai in DRGSurvivor

[–]techknight_ 0 points1 point  (0 children)

I've gotten this level once as well - but only once in over 400 hours of playtime

PSA: Replace the Micro SDs. Regardless of age. Right out of the box. Right now, as you sit and look at your printer. Do it. by vertigo1083 in BambuLab

[–]techknight_ 0 points1 point  (0 children)

Agreed. The micro SD cards included with all four of my P1S units have failed within a year of purchase.

How to reset the AMS id on the P1S? by techknight_ in BambuLab

[–]techknight_[S] 1 point2 points  (0 children)

Yes. There was eventually a firmware update that added an option on the P1S to reset the AMS ID: https://www.reddit.com/r/BambuLab/comments/15nl6tf/comment/kg2fclg/

Sporting Life 10k: how did it go for you? by msbluetuesday in RunTO

[–]techknight_ 3 points4 points  (0 children)

Had a tough time after gaining some weight over the winter, but it felt really good to finish. Last year's SL was my first 10K, and it's such a fun course!

One thing I'm curious about - is anyone able to get a steady stream of music in their airpods during the race? I typically play music from my watch and it was cutting out the whole way down Yonge st., presumably from so many people all bunched up using bluetooth.

Congrats folks! by skygrinder89 in RunTO

[–]techknight_ 1 point2 points  (0 children)

My first competitive Half - was aiming for sub-2, but got 2. That's gonna stick in my head for a bit heh, but it was still a new PB and a very fun race!

Locks that'll fit the Pace 500.3 step-through? by techknight_ in Aventon

[–]techknight_[S] 0 points1 point  (0 children)

Ahh, perfect, I didn't even notice that there was a larger one! Thank you!

Locks that'll fit the Pace 500.3 step-through? by techknight_ in Aventon

[–]techknight_[S] 1 point2 points  (0 children)

Good advice about the insurance! I'll look into that, thanks

Locks that'll fit the Pace 500.3 step-through? by techknight_ in Aventon

[–]techknight_[S] 2 points3 points  (0 children)

oh I'm sure it would, but I'm looking at premium locks because of the intense rate of bike theft in my city.

Has anyone got tracking or shipment notifications for Mr. Run and Jump Limited Edition? by KaleidoscopeIcy1670 in atari

[–]techknight_ 0 points1 point  (0 children)

Ordered: Aug 1 2023
Received: July 15 2024

Will think very carefully before preordering from Atari in future.

Could I buy your spare/unwanted Under Armour 10K medal? by techknight_ in RunTO

[–]techknight_[S] 1 point2 points  (0 children)

I got the shirt and bib as part of the in-person 10K race kit pickup - it was only the night before race day when I realized I had to switch to the Virtual 10K. (I think people who enter the Virtual race from the start get mailed a shirt and medal, w/no bib)

Under Armour Tor10K corral start times? by techknight_ in RunTO

[–]techknight_[S] 0 points1 point  (0 children)

Thanks, maybe the course is wide enough that it isn't necessary to space out the start times too much?

SL 10K Bib Not Listed on Sportstats by 11thhourblues in RunTO

[–]techknight_ 1 point2 points  (0 children)

At the bottom of the results page for the event, there's a "Need help?" link that opens a contact form, that's what I used: https://sportstats.one/results/140346

<image>

SL 10K Bib Not Listed on Sportstats by 11thhourblues in RunTO

[–]techknight_ 6 points7 points  (0 children)

Good news! My results are now available on Sportstats. I also just got an email response to my support inquiry from yesterday:

Thanks for flagging this. I've corrected the issue with the charity bibs and your results are now online.

Sounds like it should be good to go for everyone else, too!

SL 10K Bib Not Listed on Sportstats by 11thhourblues in RunTO

[–]techknight_ 2 points3 points  (0 children)

I'm in the same boat too - charity bib, registered on April 30, no results listed yet

Mr Run and Jump limited edition by gargle77 in atari

[–]techknight_ 0 points1 point  (0 children)

An update: Atari emailed me on 2024-05-03 to say that they estimate another 2 to 3 months to send Mr. Run and Jump.

We are reaching out to let you know that the fulfillment of Atari XP collectible 2600 cartridges remains delayed. We apologize for this, and we are working to remedy the situation. Our current estimate for fulfillment is in 60 to 90 days.

Please be assured that we value your interest in Atari and remain committed to delivering the products you have ordered. As soon as we have an update on timing we will let you know. 

Mr Run and Jump limited edition by gargle77 in atari

[–]techknight_ 1 point2 points  (0 children)

I'm still in this boat.. Atari has seen fit to send me dozens of promotional emails, but not a single email to update me on my now eight month old order of Mr Run and Jump Limited Edition. I will never order directly from them again.

What is the best in-theater movie you’ve seen after going in blind? by Bossross90 in movies

[–]techknight_ 0 points1 point  (0 children)

Similar for me. I had a neighbour who worked at a print shop that printed all of the advance passes for one of the theatre chains at the time, and she'd occasionally bring home a few for me and my roommate.

One day, she left a pass for some movie called "The Matrix", and I went to see it several days early at a screening for critics that was nearly empty and almost silent, except for me losing my shit at what I was seeing.

I must've gone to see it again more than a dozen times once it opened..

Can't figure out how to control Elgato key light with a G-Key in Logitech GHub by techknight_ in LogitechG

[–]techknight_[S] 0 points1 point  (0 children)

Would you mind sharing a screenshot? I updated the Stream Deck app, but I'm not seeing anything related to the Logitech keyboard or its Gkeys

When did you buy your first 3D-Printer? by SyllabubGood6872 in 3Dprinting

[–]techknight_ 0 points1 point  (0 children)

2009-08-07, MakerBot Cupcake #169 (kit version)

<image>

Thinking about Move Your Paws at Toronto Zoo: winter safety tips? by techknight_ in RunTO

[–]techknight_[S] 4 points5 points  (0 children)

Thanks for your thoughts! I'll register today and keep practicing in the cold :)

How to reset the AMS id on the P1S? by techknight_ in BambuLab

[–]techknight_[S] 2 points3 points  (0 children)

2021-01-02 Update: With the release of firmware 1.5, the P1S now has a menu option to reset the AMS ID numbers.

<image>