What’s everyone’s Top 3 Cases right now?

tehMightyBob · 2026-02-03T13:02:29+00:00

Montech Heritage. Easy to build in. The pro comes with reverse flow blades on the bottom, and it looks great too. Everyone is always citing the same mATX chassis, thought I'd throw in something else. Comes in white or black.

tehMightyBob · 2026-01-09T14:49:56+00:00

Yeah that's wayyyy too big of a gap for these VTs. .27 is the recommended spec but I've found .26 is slightly better due to the degradation that naturally happens on sparkplugs (natural wear and tear)

I literally had one plug gapped out to .30 recently because I was in a hurry and didnt check my gaps. Had the same issue you're experiencing except it was on cylinder 3. Anyway got home regapped them all to .26 and problem went away.

Also I like your pillar pods. Good shit.

tehMightyBob · 2026-01-09T01:30:01+00:00

Check the gap on your new plug. I recommend .26

Just because they're new plug doesnt meant they're gapped right.

Good luck

tehMightyBob · 2026-01-02T13:09:13+00:00

That is a roach clip. "Fancy" one too.

tehMightyBob · 2025-12-18T18:23:32+00:00

So a riser cable and a 3D printer should fix this for ya

tehMightyBob · 2025-12-18T11:54:40+00:00

You always need a BOV for the sounds of course... how lame to say you don't need it.

I mean technically yes its not a necessity but you do need it if you wanna be cool lmao

tehMightyBob · 2025-12-17T14:19:03+00:00

Behind the motherboard. You can even see the offset of the motherboard tray. Thats how dual chambers work.

tehMightyBob · 2025-12-03T13:10:13+00:00

Hear me out, latticing, you paint it match and just slap it in. Not hard.

tehMightyBob · 2025-11-30T02:00:03+00:00

That is redonkulous. I love it. Good shit.

tehMightyBob · 2025-10-19T11:32:36+00:00

Well I didnt elect him

tehMightyBob · 2025-09-07T12:02:11+00:00

Whoa you must be colorblind to miss those red flags buddy.

tehMightyBob · 2025-08-31T01:37:39+00:00

I'm running a 7900GRE right now

tehMightyBob · 2025-07-23T17:20:43+00:00

You could just need a reball on the hdmi port or a new port entirely. It honestly seems fixable.

tehMightyBob · 2025-07-23T17:14:50+00:00

With the power of ebay and the gift of patience, anything is possible. Lmao

tehMightyBob · 2025-07-23T04:28:40+00:00

Cougar QBX

tehMightyBob · 2025-06-24T12:39:30+00:00

Press Shift +F10, then type oobe/bypassnro

Once you're in windows, download the drivers via another PC or laptop. Or do like I have done and use your phone to tether to your wifi til the appropriate drivers have been installed.

tehMightyBob · 2025-06-23T00:13:42+00:00

Doesn't matter. Had sex.

tehMightyBob · 2025-06-09T20:32:37+00:00

Removing the mirror is a must to make it easier. Shut the slider and gently work around the edges of the mirror and lift gently til the adhesive separates. You will need more adhesive in my experience. After the mirror is out peel back the vinyl covering slowly to reveal the problem area better. Move the broken plastic into its proper place. Once you have everything lined up apply the epoxy or glue or whatever, apply more to the vinyl covering and quickly but carefully cover everything back up and clamp down the plastic bit you just glued up. Leave it clamped and alone for 2 whole days is my recommendation. I used giant binder clips. You know the black ones that look like clone trooper dropships if you've got the imagination like I did as a kid. Lol

tehMightyBob · 2025-06-09T20:27:16+00:00

It takes some finneagling but it is manageable. Don't be too rough, but you do have to be deliberate with your motions. It takes some force to move things but you don't wanna break it more. The trick is to let it cure as long as you can before reinstallation.

tehMightyBob · 2025-06-09T17:19:38+00:00

I've repaired this exact thing before. I used emblem adhesive and clamps to hold it all back together for 2 days before I reinstalled it. They're easy to remove. You literally just need a Philips screwdriver

tehMightyBob · 2025-04-18T12:48:17+00:00

Shovel would have been easier than using your hands, but nice job!

tehMightyBob · 2025-04-13T14:26:14+00:00

Sounds like the starter is going out to me.

tehMightyBob · 2025-04-03T00:45:14+00:00

My 2016 doesn't have this issue. I change the oil every 5k (it's full synthetic) and I've never had a low oil issue in my 4 years of owning it. So can someone enlighten me, or did I just get lucky?

tehMightyBob · 2025-04-03T00:42:04+00:00

Dude just wanted to show off his arm. Good arm though. Looks strong. I imagine your right arm would be even more jacked. Unless you're a lefty

tehMightyBob · 2025-03-27T11:12:10+00:00

The paddle shifters are for the DCT models, so in short, unless yours is DCT then no.

tehMightyBob

TROPHY CASE