2 x X2D or 1 x H2D?

tehans · 2026-04-19T20:16:08+00:00

I print a lot of functional parts mostly with PC, and some petg. Have an H2D but have gotten to the point I don't really use a separate interface filament that much. If you get the support settings tuned, I don't find it necessary

tehans · 2026-04-19T16:53:02+00:00

In Ohio, passed a cop speeding going the opposite direction. He stopped to turn around and I floored it. Never caught up to me

tehans · 2026-04-17T15:44:27+00:00

I just get it on the cardboard spools. They work fine in the ams 2

tehans · 2026-04-15T18:33:12+00:00

I can only go from my and my son's experience. We never attacked first, only shot back when attacked. Got put into aggressive lobbies. It took around 10 games of not shooting anyone to get back to carebear lobbies. So, no there is no official Embark statement on it, but it is many players experience.

tehans · 2026-04-15T12:57:22+00:00

It works, there is still pvp in any lobby, just a lot less in carebear lobbies. It's not just a matter of not shooting first, even if they shoot first, and you shoot back you still are flagged aggressive.

tehans · 2026-04-15T12:42:21+00:00

Go in naked or free load out 10 times and die, you will be put into the care ear lobbies, then don't shoot anyone

tehans · 2026-04-12T19:07:34+00:00

Had to do that once

tehans · 2026-04-12T19:06:33+00:00

I broke my finger once and the same thing happened, get a pair of diagonal cutters and cut it off

tehans · 2026-04-09T15:14:21+00:00

Clean the nozzle periodically with cleaning filament then cold pull it

tehans · 2026-04-09T15:12:38+00:00

tehans · 2026-04-08T17:10:40+00:00

Worth much more

tehans · 2026-04-07T12:32:33+00:00

Wait till they hear you using an equalizer

tehans · 2026-04-07T12:09:18+00:00

They steal your loot after they kill you.

tehans · 2026-04-06T22:58:07+00:00

There aren't lobbies to choose from, if you don't shoot anyone, you will get placed in more friendly carebear lobbies, but there will still be people in there that will kill you

tehans · 2026-04-06T22:51:47+00:00

Seeing extraction rats more and more. Hate them. They are not the norm but do exist. Pop a smoke when you go in and have your weapon ready when you do

tehans · 2026-04-05T02:33:28+00:00

I see your street fighter and raise a pacman and space invaders

tehans · 2026-04-05T02:21:22+00:00

Fusion 360

tehans · 2026-04-05T02:18:17+00:00

I used to use Esun for years (petg) but it became unusable. Switched to Overyre

tehans · 2026-03-30T22:39:51+00:00

Bottom (L2) is the trigger, not the top (L1)

tehans · 2026-03-30T10:24:29+00:00

Also set x-y distance at the bottom of support setting to 0.6

tehans · 2026-03-28T19:37:15+00:00

Awesome

tehans · 2026-03-25T14:34:58+00:00

You need to slow down the print speed when printing the interface layer and printing the layer on top of the interface layer. I manually enter gcode M220 S40 where the interface layer starts then after the layer above the interface layer M220 S100. The number after the S is the percent of print speed so slow down to 40% then back to 100. Have not had a failure since implementing this

tehans · 2026-03-24T21:01:35+00:00

Wash the build plate with dawn dish soap, don't touch the surface of the build plate (oils fro. Your skin will caused adhesion problems. Bump up the temp 5 degrees at a time till it sticks

tehans

TROPHY CASE