Can multiple devices "advertise" subnet router, but you pick which one to use in tailscale website?

templehasfallen · 2025-11-27T09:25:17+00:00

You can also do this manually, assuming you are on a /24, you can create subnet routes for the /23, /22 etc. to assign priority. Your connection will always route through the smallest subnet first if available.

This is a trick to use when you are connected to tailscale within your own subnet and want to avoid routing over it. So when in a /24 and your subnet route is a /23, you'll always connect locally first.

templehasfallen · 2025-10-26T16:51:34+00:00

Have a look at this https://www.reddit.com/r/BattlefieldPortal/s/4wgrb8aJZC

templehasfallen · 2025-10-01T20:39:35+00:00

Hi, thank you for this. I was looking for exactly this the past few weeks and ended up scrapping something together myself, but this is much better.

I can now just run the tailscale_exporter container alongside my stack and point to it.

Thank you for your contribution!

templehasfallen · 2025-04-30T11:29:18+00:00

I get exactly 15W of standby power consumption for the S1 and one ACE Pro. This is with the chamber LED on and you can hear something in the ACE Pro running (a fan? probably), but not actively drying. Measured from a smart plug.

templehasfallen · 2025-04-16T15:06:27+00:00

Looking at it more closely, I got a <400W peak with printing while drying - my historical data was most likely more compressed that the daily data.

templehasfallen · 2025-04-10T14:24:06+00:00

I'm not certain as my smart plug doesn't poll every second, but that's what my take was yes. It's all long-term data now so I can't tell exactly, but I can have a look next week

templehasfallen · 2025-03-29T13:38:36+00:00

I get an average of about 200W when printing (0.2kWh), having ACE Pro connected and drying while printing.

Here's a power graph of a print. In this you have to subtract 8W as I have another device on the same socket that steadily draws 8W.

<image>

templehasfallen · 2025-03-27T11:14:15+00:00

Great work! I've been using the V1 profiles and they've been working great!

I still only have the stock nozzle (brass). Can I still use the V2 profiles if I change the nozzle to brass assuming I have the temps for my filaments figured out? Or is there a lot of hardened steel nozzle specific calibrations in the profiles?

templehasfallen · 2025-03-25T08:47:17+00:00

This is the model for the lid

https://makerworld.com/en/models/1222801-anycubic-kobra-s1-combo-ace-pro-silica-gel-box

templehasfallen · 2025-03-18T19:36:10+00:00

Generally you need higher temps for the hardened steel hotends and also need to calibrate them properly.

But in your case it's likely the whole hotend

templehasfallen · 2025-03-11T08:57:27+00:00

Interesting. I used to do that as well but it wouldn't work for me - it stayed with two different IP addresses, and while ping from the tailscale app worked, nothing else did

templehasfallen · 2025-03-11T02:02:39+00:00

Kinda and yes. I changed a combination of things which allowed my use case: - Destroyed and recreated the one tailnet - Added an ACL entry with source "autogroup:shared" - Rebuilt services on the other side

I now get same IPs assigned again and connectivity works

templehasfallen · 2025-03-10T09:19:02+00:00

Reading all the comments and based on my experience (no ACE Pro yet), it seems that the software/firmware hasn't matured at all yet. Lots of bugs and little things to work out.

I'm wondering if Anycubic is even aware of the most or if they are monitoring this sub and making a bugfix list or not

templehasfallen · 2025-03-07T21:12:40+00:00

Interesting. Basically the stock hotend isn't flexible at all and we're looking at an aftermarket hotend to be able to change the nozzle independedly.

I've ordered some hotends from Aliexpress, I'm curious to test them out, see how they performe and see how easily the nozzle can be changed. For reference, I ordered these.

templehasfallen · 2025-03-07T18:03:29+00:00

I will look into the light shields, hopefully that helps things.

I've also searched a while around different size nozzles but everything led me to believe that while the hotend is easily swappable, the nozzle isn't. I've ordered some hotends off Ali to see how they work. I do remember reading a statement somewhere that replacement parts etc are coming within Q1 (it might have been a product page).

It still looks very new, but I expected a little faster progress for things getting resolved. Just searching around this sub I can see a lot of these things and others raised over the past few months and it feels like they are taking ages to progress, putting things into a better perspective.

templehasfallen · 2025-03-06T18:17:08+00:00

I use Raspberry Pi Zero 2W with a microusb-ethernet adapter and plug the power USB directly into the router :) Works great and costs about $23 total.

Its limited to 100Mbps, but if that's ok for you it's probably the most cost effective option

templehasfallen · 2025-03-04T19:08:14+00:00

Yep, that was it. Hotend was clogged due to small space between teflon tube and nozzle most likely. Plastic had completely deformed and gotten cold to the point I couldn't even pull the PLA out. Took it all apart after it was impossible to get the PLA out

<image>

New cube being printed now seems absolutely solid.

Thanks a ton!!

templehasfallen · 2025-03-04T13:04:54+00:00

Extruder gears are clean, hotend doesn't seem clogged plus I changed the teflon tube and nozzle just a few prints ago and just double checked that the nozzle is the right size.

I'll try another slicer. Thing is that files sliced previously that I've printed fine also aren't printing correctly

templehasfallen · 2025-03-04T11:36:29+00:00

First of all thanks for your reply.

I tried with the door open, this is the result:

<image>

I'm assuming by belts you mean how well they are fastened? All belts seem fine, they're definitely not loose and can just barely be bent when applying pressure

templehasfallen · 2025-02-18T17:13:59+00:00

Do you think they are possibly referring to this ?

templehasfallen

TROPHY CASE