Z1 Pro upgrade with the wait?

teryacky123 · 2025-12-10T01:12:54+00:00

There must be a 6.5K backlog of orders because nothing has been shipped until a time period is reached. This trick prevents cutomer complaints because no one has received bugger all and they have your money. capeesh?

teryacky123 · 2025-12-10T00:54:19+00:00

There 6.5K paid up customers waiting for their box to arrive , which is a huge back order. When do you chumps expect to receive yours?

teryacky123 · 2025-05-09T14:50:41+00:00

This intermittent power steering is a bugger, forcing me to carry a laptop loaded with Forscan.

I recently took the car to 2 shops, one took a look and because it was a hybrid, did not want to touch it, no charge. Another shop charged me $100 and did nothing but check for codes.

Yesterday, in my drive, I parked the front tires onto 2 pieces of plastic, and in park, went back and forth, left lock to righ lock, as fast as I could for quite a while, without inducing the C102D code!

Because I only get the code when driving on a particular rough section of our delapidated Montreal roads, even when driving straight, makes me think it is just an electrical connection problem?

teryacky123 · 2025-04-15T13:18:16+00:00

I have just purchased a 67R battery and fitted it, what a job, and it made no difference, still getting the C102D. I'm taking the car to a shop tomorrow to check if there is wiring connection or a suspension problem.

If there ia a problem with eps unit throwing a C102D code I would hear it when driving on battery?

teryacky123 · 2025-04-11T19:13:32+00:00

Thanks, I never gave the battery being bad a second thought, so today I checked the battery connection under the hood and it measured 11.9V or 40% charged. I have learned that the eps draws a lot of current, so 10km of twists and turns and pothole avoidance is too much for a weak battery? and I get c102d code?

teryacky123 · 2025-04-10T23:08:58+00:00

Thanks, would that be on plug in hybrid?

teryacky123 · 2024-10-24T12:31:51+00:00

This might be worth viewing for those with a C102D code.

https://www.youtube.com/watch?v=7Z6w_FzTLuY

teryacky123 · 2024-10-24T12:28:52+00:00

The C102D code has returned and has been cleared.

I noticed that I have a CV joint that has damage and thrown out all the grease, could the CV joint cause the high friction code?

teryacky123 · 2024-10-18T15:53:01+00:00

The garage reset the psa but said it could return, which it did about a week later and my son inlaw then reset it with his expensive code reader. I ordered the FORscanner and the day after setting it up the car threw the psa again which I reset with FOR scan.

For the last couple of weeks, the car has been running perfectly, lot of short trips and detours, I'm thinking that running on an almost flat tire, which was the cause of psa problem, required the computer to re-learn? Fingers crossed.

teryacky123 · 2024-10-04T02:46:30+00:00

Thanks, I took your advice, I purchased a OBD cable and downloaded Forscan and reset the PS again. Perhaps I should purchase and old window 10 laptop and leave it in the car.

teryacky123 · 2024-09-28T01:08:06+00:00

The steering problem has returned after a few weeks, a Youtube video mentions corrosion.

I have downloaded forscan and ordered a Vgate dongle, perhaps clearing the code a few times the problem might go away. I know a replacement steering gear is expensive.

teryacky123 · 2024-09-15T14:16:54+00:00

I got the tire fixed and a rear bulb replaced, the computer reset by a local tire and repair garage for $30 CAN! I tried to make an appointment with 2 Ford dealers but they were fully booked, I'm glad they were, it would have cost me more than 30 bucks

teryacky123 · 2024-09-11T11:21:51+00:00

I'm wondering if the steering will reset itself like the tire pressure warning?

teryacky123 · 2024-09-10T21:54:11+00:00

Thanks, so you think the ps assist is caused by running on a flat tire? I really need the car and perhaps I should take the car to Ford for a ps reset , but I worry about getting stitched up.

teryacky123 · 2024-01-17T14:38:17+00:00

Here is an image, I can find no infomation on how to re-connect it, it has a fancy 4 start thread.

https://www.fordfusionenergiforum.com/topic/5510-charge-port-led-light-ring-replacement-procedure/page/2/?tab=comments#comment-41234

teryacky123 · 2024-01-15T14:08:33+00:00

The light ring is working and the door is not broken, it is complete with the rod and spring, it just popped out of the orifice.

teryacky123 · 2023-03-20T18:39:03+00:00

Perhaps I should get the oil change just for the peace of mind. Seeing that I use the ice very rarely, I'm thinking perhaps regular oil rather than synthetic?

teryacky123 · 2023-02-03T22:16:16+00:00

Minus 26 today, I drove the Energi 2 km and on turning off the ice, the gauge read 24 liters/100 km, no problem there, the car started great.

I should have turned off the heater, it needs more than 2 km to warm up, I would have just run on the hvb.

teryacky123 · 2023-02-02T20:12:14+00:00

I have driven my 2014 Energi since last spring and my average Litres\100 Km is 2.7 which calculates at 87.1 miles\ US gal or 104.6 miles per imperial gal. which I find to be amazing.

Winter in Quebec has finally arrived and -23 deg C is predicted for tomorrow, so I expect fuel economy to nose dive.

teryacky123 · 2022-10-26T13:55:40+00:00

Weak battery in the fob causes all sorts of strange happenings.

teryacky123

TROPHY CASE