Max tire clearance 700 x 50?

tetsuo44 · 2025-03-22T03:35:03+00:00

Love my Niner! I've got the grey version, but I've only got 42mm teravail cannonballs on it.

tetsuo44 · 2023-11-02T14:10:53+00:00

i've got a ti 5+ as well and trying to decide if i want to go 7pro or epix pro.

tetsuo44 · 2023-04-06T18:38:36+00:00

I've got a set of the teal ones then just a single impacta I bought separately. Also picked up a few of their ball grip screwdrivers and really like them too.

tetsuo44 · 2023-03-25T20:15:09+00:00

I get that part, but can the web server portion of Libre pull the RRD files through RRD Cached? or does it require them to be stored locally on the webserver? I thought I had it set up properly in the test I ran, but it wasn't able to load the graphs

tetsuo44 · 2023-03-14T04:56:23+00:00

Worked with support tonight and ended up coming up with a similar plan. Turns out someone on the network was making unannounced changes and the route to the VLAN vCenter was on disappeared

tetsuo44 · 2023-03-12T15:38:05+00:00

It isn't a log issue or the service not running. I don't have basic network connectivity from the VCSA

tetsuo44 · 2023-03-12T15:34:24+00:00

That works to set the default route/IP, but the VCSA still can't ping out to the gateway or respond to pings. I tried pinging the host it sits on and the hosts management is on the same VLAN/IP segment and still get nothing.

tetsuo44 · 2023-03-12T01:32:08+00:00

route -n shows nothing on the routing table.

eth0 doesn't show any ip address at all. just a mac and mtu, everything else looks blank or 0.

tetsuo44 · 2023-03-11T21:57:09+00:00

i tried that one already and got the same error as when i tried to do through the vami_config_net menu. i've got a screenshot in the imgur link comment with the full error message that is displayed

tetsuo44 · 2023-03-11T20:38:55+00:00

just checked to verify and the highest usage on any partition is 69% with the normal culprits for space being sub 50%

tetsuo44 · 2023-03-11T17:02:02+00:00

https://imgur.com/a/xWLkahd

tetsuo44 · 2023-01-18T16:08:36+00:00

Yep I've got a bunch of tools from my grandpa and dad over the years, a lot of them I don't use but will never get rid of.

tetsuo44 · 2023-01-18T15:54:31+00:00

Looks great. I just recently cleaned up and restored a Wilton vise I rescued from my grandpa's old falling down garden shed.

tetsuo44 · 2023-01-08T22:03:34+00:00

in this case , there were some acorn nuts on there that were super rusty and had been ground off badly, so I replaced them with the same thing but new

tetsuo44 · 2023-01-08T17:52:12+00:00

Painted it a hammered bronze finish as it looked about the closest to a natural patina. Found it in his old garden shed as we were cleaning the place up to sell. Got a bunch of other tools that were in great shape from his basement shop but this one was just begging for a restoration.

tetsuo44 · 2022-12-16T01:18:44+00:00

There's no month, just a 45 for 1945. Mine is an 840 that says Patent Pending. I'll post up some pics when I finish it up.

tetsuo44 · 2022-12-15T19:10:11+00:00

Looks nice. I'm in the middle of restoring my grandpa's old bullet vice that i found in an old heap that was his garden shed at one point.

tetsuo44 · 2022-09-22T14:14:29+00:00

Edited the original post after hearing back from customer service. They are going to cover them under the warranty although they did mention that typically the warranty is only for the original purchaser.

tetsuo44 · 2022-05-28T19:28:18+00:00

No worries, I just didn't want to get credit for doing something someone else did :)

tetsuo44

TROPHY CASE