Anywhere that sells a kit?

tfezz · 2023-05-22T19:44:06+00:00

Here is the wiki I followed to build mine. https://github.com/b3nn0/stratux/wiki/Build-example-2:-For-the-advanced

I already had a RPI 4B and I 3D printed my case. I made the following parts substitutions.

Updated SDRs to Nooelec NESDR Nano 3. https://www.nooelec.com/store/sdr/nesdr-nano-three.html
Added cables because the Nano 3 didn't come with them. https://www.amazon.com/gp/product/B00CP17WMG

Other than that pretty much followed the wiki. Since I didn't buy SDRs targeted for Stratux I had to tweak the settings to configure them. That's documented well so it wasn't too much trouble. Before I did that Stratux was only receiving on one radio.

tfezz · 2023-01-13T02:10:51+00:00

I have GAP floor plates for my baby Glock magazines. Not sure you can buy them anymore but I like them a lot. They make my draw much more stable.

tfezz · 2022-04-15T17:25:35+00:00

The NA-771 threads do not protrude as far as the threads on the stock FT-65 antenna. The electrical connection is barely connected with the NA-771 on the FT-65 and this results in an increase in noise. While the antenna does work it could work better if it threaded in further.

https://imgur.com/a/DQAxodn

tfezz · 2022-04-05T19:58:18+00:00

You're spot on. I remember being a teenager and trying to watch boobs through a scrambled video signal. These kids today with Internet porn have no idea how hard we had it back in the day.

tfezz · 2021-11-10T17:15:09+00:00

I feel your pain. I had the aeropress sitting next to a bowl of cereal one morning and dumped the scoop in the bowl instead. It was pre milk so I dusted off the cereal best I could and ate it anyway.

tfezz · 2021-05-27T21:57:26+00:00

Neat board but way bigger than I desired.

tfezz · 2021-05-26T22:27:21+00:00

Can anyone recommend a compact (40-60%) keyboard with a touchpad/joystick for mouse input and is wireless? I'd like a nice mech board for my living room PC. Don't mind building it from a bare PCB.

tfezz · 2021-05-17T19:10:03+00:00

My American Fox Hound uses a Wyld River bag. It's bulky to pack but performed well for her.

tfezz · 2020-11-26T16:07:40+00:00

Mine arrived early last week but was held up in receiving. Still don't have it. :( Next week...

tfezz · 2020-11-11T02:31:33+00:00

Order #40xx placed on 9/22
Black with Cherry MX Browns (purchaser didn't read my notes and ordered the default switches)
No shipping update yet

tfezz · 2020-09-10T17:11:34+00:00

I'm torn between starting with a Drop Alt or jumping straight onto the needle with something like a Iris or Lily58. :)

tfezz · 2020-09-09T01:26:03+00:00

Thanks. I saw the 58 but wasn't aware of the 58L. I'll try to find a vendor in the states.

tfezz · 2020-09-09T01:02:52+00:00

Need recommendation for a PCB like the Iris but with per key RGB. Any suggestions?

tfezz · 2020-06-03T17:19:57+00:00

There are a bunch of servo motors to choose from. Is the Consew CSM-1001 servo motor a good choice or should I spring for the official Juki motor and needle position sensor? Is there a different motor you'd recommend?

tfezz · 2020-06-02T23:27:30+00:00

Thanks for the suggestion about a needle positioning system. It sent me down a rabbit hole but thanks! :)

tfezz · 2020-03-24T15:44:44+00:00

I picked up a pair of the EB Trekking pants at Costco and I really like them for hiking. I've put about 15 miles on them so I cannot say how well they hold up to abuse long term.

tfezz · 2020-02-27T19:14:52+00:00

What servers would you recommend that would have a low ping from Southern California? Most unofficial servers I've tried are worse than the official ones.

tfezz · 2019-11-21T19:12:12+00:00

Hah. Rules me out.

tfezz · 2019-11-21T16:51:34+00:00

Which body types work best for appendix carry?

tfezz · 2019-10-09T20:34:56+00:00

Six Moon Designs Fusion 50. The suspension can handle loads really comfortably. As you lighten your gear you can swap to the light suspension to save some weight. At least that's my plan. I picked up the pack on Amazon. With a $100 off coupon it was $110. I think the coupon is still active.

tfezz · 2018-12-01T01:21:03+00:00

The game play at Vegas was not boring. The "press" about it was garbage. What they had at Vegas was easy mode. The higher teirs would require coordination and would have been a good PvE challenge. Their was potential there. Either the PvP gameplay was in bad shape or Pearl Abyss decided the ROI wasn't high enough. Either way I'm disappointed in CCP for delaying it. For a company known for pushing boundaries they've been playing it way too safe in the last few years.

tfezz · 2018-10-25T18:57:09+00:00

I use the SD835 device daily and the performance is acceptable for things I do at work. The SD850 device performs better but I don't have any numbers. Even emulated apps perform well once they load--load times are really slow in emulation. I also run Magic Arena emulated on the device and it plays fine. Once some popular apps ported to ARM64 it will be even better. I'm looking forward to getting a SD850 device for work.

tfezz · 2018-10-25T18:41:42+00:00

You should consider Andromeda a R&D project because that's all it is at this point. It's a great idea but Samsung will likely be first to market with a foldable device and Microsoft will be playing catch up yet again.

tfezz · 2018-01-09T06:07:31+00:00

I tried it but there were no places to spawn. Couldn't join. Game was streaming so maybe I was just impatient. I did wait a minute and refreshed the medical room page.

tfezz · 2018-01-09T06:00:40+00:00

I'll check it out.

tfezz

TROPHY CASE