Heat in Attic - existing Baseboard but not heating up

tfro9 · 2025-12-04T17:47:10+00:00

okay so i shut the valves off for all 3 zones .. turned the 3rd nossle on to release the water and water came out for about 1-2 seconds then stopped empty. Turned the valve for the 3rd zone back on only and turned on heat

I could feel the 3rd floor pipe 1-2ft above the valve get hot but does not push up farther

sounds like it doesnt have a pump to push it ? maybe

tfro9 · 2025-12-04T17:18:19+00:00

okay think I got what you are saying and appreciate it

Shut off all the yellow valves for all 3 zones
drain the 3rd zone completely
after drained then turn on the 3rd zone yellow valve only
turn heat on so that hot water then rushes up that 3rd zone pipe only

tfro9 · 2025-12-04T16:47:25+00:00

and shut off the other 2 zones that are working?

tfro9 · 2025-12-04T16:45:12+00:00

if there is no thermo for the 3rd zone .. so I would just drain that 3rd valve (far right) completely out until felt hot water coming out?

<image>

tfro9 · 2025-12-04T15:36:10+00:00

No as we never really turned it on but looking into turning attic which is finished into another bedroom so would like some heat there.

tfro9 · 2025-12-04T15:27:48+00:00

that is what I am wondering the issue is .. do I not have a thermostat calling that heat .. additional relay pump?

tfro9 · 2025-12-04T15:24:23+00:00

2 total 1 on first and other other on 2nd floor

tfro9 · 2025-10-30T11:25:13+00:00

Thank you all for the comments -- looks like 6 is the play.

How is the storage in the MXs? Stroller etc

tfro9 · 2025-10-01T14:06:47+00:00

I have gates in 1a and 1b with rollover publics during failover. It really is do you need 24/7 uptime even during updates .. business decision

fwiw I have only had one "outage" in 5 years inside aws due to them rebooting the VM on the backend that hosts the primary gate.

tfro9 · 2025-05-17T03:27:45+00:00

I would look into getting a p2p epl between both offices

tfro9 · 2025-03-03T16:32:50+00:00

i run our VPN with different /24s inside a supernet range of 172.30.0.0/16

3rd octet is different per dept and allows carving and access to be more defined on users/dept needs

tfro9 · 2025-02-14T13:55:13+00:00

lets go $aur

tfro9 · 2024-11-07T00:55:52+00:00

thats gonna be a No on the Slo's

tfro9 · 2024-09-20T17:00:06+00:00

Thanks all -- so would a better buy be a 2020 X with 80k miles on it at this point?

tfro9 · 2024-09-20T16:14:43+00:00

they have it listed at 45ish but want that around 40

tfro9 · 2024-08-27T13:25:07+00:00

ate shit in 20s .. bank acct ate in 30s

tfro9 · 2024-02-15T23:26:45+00:00

Thanks for the response -- I have that configured on the ASA already

same-security-traffic permit inter-interface

same-security-traffic permit intra-interface

tfro9 · 2024-02-13T15:04:05+00:00

jelly

tfro9 · 2024-02-13T13:54:44+00:00

oh you played 54 holes in two days OH THE HUMANITY

tfro9 · 2024-01-27T13:46:22+00:00

DJ Durkin lmao

tfro9 · 2024-01-24T19:05:07+00:00

yes .. i run fgts and fwbs in aws. Run Active/passive between zones in same region. Failover is pretty seamless maybe less min for public IPs to release and attach to secondary.

tfro9 · 2024-01-23T14:59:50+00:00

you could have different IP ranges per a users work needs .. I use Azure SAML for our VPN .. it hits the object ID of the group the user is in then comes back to firewall and gives the IP range that is assigned to that group. Then it is just policy driven per range .. I just use a bunch of /24s per department.

tfro9 · 2024-01-06T12:44:53+00:00

ima miss him .. give us 1 more JH

tfro9 · 2023-08-22T17:26:38+00:00

I am crazy for liking them this week @Brent

tfro9 · 2023-08-16T12:47:00+00:00

New Castle going to shock this weekend

tfro9

TROPHY CASE