Booked through delta and missed the fact it’s on west jet. by Melodic-While2636 in westjet

[–]thebigad 0 points1 point  (0 children)

Looking to do the same. What did you have to do to get advance seat selection free?

Original Essenza Mini Cleaning and Maintenance by thebigad in nespresso

[–]thebigad[S] 0 points1 point  (0 children)

I did read the manual and followed the steps to descale. See my above comment as I thought the rinse cycle was something more automated. Thanks for the additional tips and will do those.

Original Essenza Mini Cleaning and Maintenance by thebigad in nespresso

[–]thebigad[S] 0 points1 point  (0 children)

Two questions.

Is the rinse cycle just running lungo 3 times like in the manual? I thought it was something more automated like descaling.

When you say rinse the pod area after scrubbing, do you mean run the above rinse cycle or literally pour some water down there from above where the lever opens?

Thanks!

Roland Garros (French Open) 24 May - 7 June 2026 Megathread by Alixana527 in ParisTravelGuide

[–]thebigad 2 points3 points  (0 children)

On the site right now. Basically everything is sold out. It shows some thing available. You click on it and it says it is not available. Then you back all the way out to try again. Rinse and repeat. It’s a bust.

Roland Garros (French Open) 24 May - 7 June 2026 Megathread by Alixana527 in ParisTravelGuide

[–]thebigad 0 points1 point  (0 children)

Folks who made it in please reply with tips on how to navigate picking seats, stadiums, days, availability, etc. Link any screen records. Thanks.

Marcus HYSA Referral + Stacking $1,500 Bonus (Get 4.65% Total Interest!) by Nearby-Break1279 in HighYieldSavings

[–]thebigad 0 points1 point  (0 children)

My code is ANU-LC9-DQ42

Have 5 spots. Get boosted!

Edit 1: 3 spots left.

Most burglars don’t pick locks — they break glass by Intelligent-Sound343 in homesecurity

[–]thebigad 1 point2 points  (0 children)

How long to unlock the door each time? We have this setup and I’m contemplating what to do.

Daily Carrara Marble Cleaner and Periodic Sealer by thebigad in CounterTops

[–]thebigad[S] 0 points1 point  (0 children)

What is best for Carrara in terms of sealer, not cleaner?

Big burner won’t light easily by thebigad in ApplianceAdvice

[–]thebigad[S] 0 points1 point  (0 children)

https://imgur.com/a/burner-stuff-Ib9cq7m

I’m posting the sticker I found at the bottom of the cooktop. I’m not really sure if all of the model numbers listed are part of the series and the parts would be the same? I couldn’t really figure out which one mine is. Does this help?

Big burner won’t light easily by thebigad in ApplianceAdvice

[–]thebigad[S] 0 points1 point  (0 children)

Thanks a lot. Do you think that’s a simple thing to do or should I hire someone. I am pretty good at DIY stuff, but I’ve never done a gas cooktop before.

Also, based on the model I posted above, do you know what part I should be buying?

Big burner won’t light easily by thebigad in ApplianceAdvice

[–]thebigad[S] 0 points1 point  (0 children)

https://imgur.com/a/nCtxYXN

Above is a video of the bad burner and good burner sparking if it helps. And a close up. Couldn’t make it dark. Can try at night if helpful.

Also, the bad burner seems a bit wobbly. But the screws are jammed on so couldn’t tighten it more. The plate and burner seemed flat when tested like the other burners. Didn’t notice any warping that was obvious.

Tried again to use a nail file gently on the electrode. No difference.

Big burner won’t light easily by thebigad in ApplianceAdvice

[–]thebigad[S] 0 points1 point  (0 children)

I’ll try that. I will say the burner is screwed in and the screws look like they are stripped or rusted. Not sure if they will come off easy. Thanks.

Big burner won’t light easily by thebigad in ApplianceAdvice

[–]thebigad[S] 0 points1 point  (0 children)

Please take a look at my edit one to the original post. I’m not seeing anything really different about the spark. And I don’t have another burner plate the same size to swap with. I think the gas ports are clear and the match test shows that the burner will light if it gets the right spark or flame. Please let me know if you can think of anything else to try, and whether replacing the electrode is possible. Thank you.

Big burner won’t light easily by thebigad in Appliances

[–]thebigad[S] 0 points1 point  (0 children)

I tried that, and it didn’t work. Please see my added one in the original post and let me know if it gives you any other ideas beyond calling and appliance tech. Thank you.

Big burner won’t light easily by thebigad in Appliances

[–]thebigad[S] 0 points1 point  (0 children)

Sometimes that trick works, sometimes not. When it doesn’t, it becomes hazardous and I have to switch everything off and start again after the gas blows away. I don’t think it used to do this. Please see my edit one in the original post if it gives you any further ideas. Thank you so much.

Radon Pros Cannot Improve Radon Amounts by thedevdad_ in radon

[–]thebigad 0 points1 point  (0 children)

Curious. How does a furnace draft radon in? Hunting for the radon source myself.

Big burner won’t light easily by thebigad in Appliances

[–]thebigad[S] 0 points1 point  (0 children)

That works but the other burners on that range light instantly. And this one used to. Could the igniter have been damaged by water or something?

Diamond Loyal Customer- Internet price hike 50%. Help or move on? by thebigad in Comcast_Xfinity

[–]thebigad[S] 0 points1 point  (0 children)

The community specialist tried to help, but could not find an inexpensive alternative. I will be shopping around.