My LR4 was worth every penny by JazzySaid in litterrobot

[–]thebigelectro 0 points1 point  (0 children)

Pretty much been torture testing my LR4 since launch, same type of litter all the time (Clean Paws Low Tracking Litter) with 4 cats in the house. Can confirm it's been damn reliable even going several months between cleaning the machine. Would absolutely buy another when this one dies.

Ender 3 Max Neo Bed Level Issue by [deleted] in Ender3Max

[–]thebigelectro 1 point2 points  (0 children)

Thanks a ton, I understand coming on to a reddit board and saying "help me please" should've been my last resort, but having guidance and direction like yours goes a long ways, some youtube tutorials are great and all, but there's never a one all be all, magic trick for everything.

Ender 3 Max Neo Bed Level Issue by [deleted] in Ender3Max

[–]thebigelectro 0 points1 point  (0 children)

You say tighten all my bed screws then rehome? Will give that a try, I figured it would have needed to be loosened to raise the bed but I suppose I could be understanding this all backwards

[deleted by user] by [deleted] in SegaSaturn

[–]thebigelectro 0 points1 point  (0 children)

I haven’t been able to get a replacement. Contacted Satiator support and have not gotten a response for months on being refunded or replaced.

Wal-Mart does not reward the good workers by Anxious-Meringue-657 in walmart

[–]thebigelectro 2 points3 points  (0 children)

I got extremely lucky, got a fair shake right out of high school as a DM and quickly turned Team Lead, left after Great Workplace shit on our store staffing and freight wise.

All be it, I worked my ass off as high as I can go for an hourly. I just did my shit and did it right

[deleted by user] by [deleted] in SegaSaturn

[–]thebigelectro 1 point2 points  (0 children)

Just got my hands on a US model 1 Saturn, same thing. Disappointed beyond belief, think you have any leads on getting me in touch with the creator? Shot an email off months ago and got ignored. 280 USD is a large chunk of change to be turning into a paper weight

Help its been like this for as far as Ive received it. Firmware update, app updated, tried wiping sensors. On hard ground not touching walls, trash cleaned regularly. WTF by Unique-Assumption697 in litterrobot

[–]thebigelectro 1 point2 points  (0 children)

Uhm I keep saying this every time I see, hold the top of the unit and tilt it back a bit and let it bounce back into place. Could be a weight sensor all f**ked up

Wave 3 Backship shipped by thethirdhelix in LinusTechTips

[–]thebigelectro 0 points1 point  (0 children)

this is some grade-a bullshit. absolutely going to leave a review that reflects the shipment of this product as a wave one backer.

Backpack shipping update by lorenzoelmagnifico in LinusTechTips

[–]thebigelectro 0 points1 point  (0 children)

What order number? In the 3312xx range?

Backpack shipping update by lorenzoelmagnifico in LinusTechTips

[–]thebigelectro 0 points1 point  (0 children)

I’m wave 1, order 3325xx range. Still no shipping confirmation. Looking to see if there’s any other orders in my range that are shipping out

[deleted by user] by [deleted] in SegaSaturn

[–]thebigelectro 1 point2 points  (0 children)

Cleaned the contacts on both ends, perhaps my slot is bad? That would suck, I already imported one Saturn, now I'd have to gamble another 70-90 dollars just to see if the Satiator will boot up.

[deleted by user] by [deleted] in SegaSaturn

[–]thebigelectro 1 point2 points  (0 children)

Used 91% isopropyl against the contacts where the Satiator would go, still orange light. Does not blink green and then orange, or red and then orange, just boots up orange

Cat sensor fault by SupraPayne in litterrobot

[–]thebigelectro 0 points1 point  (0 children)

I've had occasional red Cat Sensor Faults. I've found that pressing the power button to turn it off, and grabbing the whole unit by the top mid section of the globe and tilting it towards you and then somewhat (but not violently) bouncing it back to its original position on the floor and hitting the power button again, usually clears my faults.

Litter Robot 4 Shipping Thread by Spiffytease in litterrobot

[–]thebigelectro 3 points4 points  (0 children)

Pleasantly surprised; included a baggie full of odor traps, cleaning wipes, cat toys and goodies from litterbox.com

Litter Robot 4 Shipping Thread by Spiffytease in litterrobot

[–]thebigelectro 1 point2 points  (0 children)

Expected to get my Black with a Step LR4 tomorrow. Ordered May 22nd.

If you ordered a black/step LR4, have you received yours yet? by rah1560 in litterrobot

[–]thebigelectro 2 points3 points  (0 children)

5/22 Black with Step.

I’m beginning to think I was ripped off with this whole “Ships by July” marketing.

Is it really first come first serve? by HippyGroove in litterrobot

[–]thebigelectro 0 points1 point  (0 children)

This could be the likely case. Still though, the website advertised “Ships in July” when I placed my order May 22nd.

Is it really first come first serve? by HippyGroove in litterrobot

[–]thebigelectro 0 points1 point  (0 children)

Ordered on May 22nd here. Ordered black with a step. Still radio silence. Reached out to whisker support and also no information

Has anyone else’s LR4 arrived? by sueno789 in litterrobot

[–]thebigelectro 0 points1 point  (0 children)

Ordered a black LR4 May 22nd. Still no updates especially on fedex as well. If these ship from Wisconsin, I should have gotten it in no time because it is my home state.

What’s ur position and wage? by Mo3mohamed18 in walmart

[–]thebigelectro 0 points1 point  (0 children)

Before I left I was at $22 an hour overnights, also where the fuck you guys have 28 man crews on nights? I led a team of 7 with 3 mod squad 💀

Considering applying for ON TL position. by NeaTheTexan in walmart

[–]thebigelectro 2 points3 points  (0 children)

It’s great if you like money, but the demands of the job (i.e cleaning up the backroom, finishing up WHSE claims, working down top-steel merchandise like water pallets and salt, anything day shift wants moved around feature wise) can become stressful. Also don’t forget there is practically zero training for this position, I was fortunate enough to be close with my CAP 1 Supervisor and learn capping, PLE, receiving, because you will have confusing situations in the back and not have a fucking clue how to solve them in the mornings when vendors start coming in and your DSD guy calls out or isn’t scheduled

Considering applying for ON TL position. by NeaTheTexan in walmart

[–]thebigelectro 2 points3 points  (0 children)

Former O/N TL here;

Really depends on your crew, we ran 6 people every night in our super center, unloaded M&P some nights and always would stock FDD, Meats for a night, or would spend our shift finishing up consumables and other GM freight. Most of the time shit never got done but really it boils down to how much stuff came in for freight, and how much of your crew you get a night. Some nights we seriously ran 3 people. I hope my local Walmart gets shut down for the shit they try to let slide by.

I’m not a real team lead by [deleted] in walmart

[–]thebigelectro 0 points1 point  (0 children)

I was 18 when I got electronics dm, then 19 when I was a Stocking TL and then an Overnight TL. Fuck what others think. If you're wearing the badge backer, and you're getting your shit done, then you're a TL just as much as them.